eufy T8414T21 Indoor Cam Mini Security Indoor Camera User Manual

T8414T21 Indoor Cam Mini Security Indoor Camera
User Manual QUICK START GUIDE
IndoorCam Mini

PRODUCT OVERVIEW

Model：T8414

1. Lens
2. Microphone
3. SD card slot
4. Status LED
5. Speaker
6. Power input
7. SYNC button

POWERING INDOORCAM

ADDING

TO EUFY SECURITY APP

1. Download and install the eufy Security app, then sign up for an account.
2. Follow on-screen instructions to complete the setup.

MOUNTING INDOORCAM

Select a Location
The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling. Keep the camera at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view. Do this to avoid infrared reflection which can have a negative impact on the night vision performance. Ceiling Mount

1. Place the positioning card against the ceiling and then mark the points.
2. Drill holes with a 5/16” (8 mm) drill bit.
3. Insert the anchors into the holes, align the holes on the mounting plate with those in the ceiling, and fix the screws with a Phillips-head screwdriver to fasten the mounting plate to the ceiling.
4. Align the grooves with the mounting plate and rotate the camera clockwise until it clicks into place.

Wall Mount

To mount the camera on a wall, we recommend using a mounting bracket (not provided) as illustrated below.

SETTING ANGLES

Open the eufy Security app, and set a default angle and a privacy angle for the camera on Camera Settings > Angle Settings.
Default Angle
The camera will automatically rotate to this angle when turned on and when motion tracking ends.
Privacy Angle
If Privacy Mode (Camera Settings > Privacy Mode) is turned on, the camera will be turned off and automatically rotates to the privacy angle you set. If no angle is set and Privacy Mode is turned on, the camera will turn 180° from the Default Angle.
NOTICE

FCC Statement

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES003.
IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
The adapter shall be installed near the equipment and shall be easily accessible.
Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment.
The suitable temperature for T8414 and accessories is -20°C-45°C (-4°F – 113°F). When supplying, please place the device in an environment that has a normal room temperature and good ventilation.
It is recommended to supply the device in an environment with a temperature that ranges from 5°C~25°C.
Please ensure to use only the adapter offered by the manufacturer. Using unauthorized adapter may cause danger and violate the authorization of the device and the guarantee article.
This adapter is for indoor use only.
The output voltage/current of the adapter is 5VDC/1A. The plug is considered as disconnect device of adapter.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.
Wi-Fi Operating Frequency Range: 2412~2472MHz;
**** This product is designed and manufactured with high quality materials and components, which can be recycled and reused.

Customer Service

Warranty
12-month limited warranty
Call Us
United States
+1 (800) 988 7973
Mon-Fri 9AM-5PM (PT)
United Kingdom
+44 (0) 1604 936 200
Mon-Fri 6AM-11AM (GMT)
Germany
+49 (0) 69 9579 7960
Mon-Fri 6:00-11:00
Email Us
Customer Support: support@eufylife.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong

 @EufyOfficial
@EufyOfficial
@EufyOfficial

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are
trademarks of Anker Innovations Limited, registered in the United States and other
countries. All other trademarks are the property of their respective owners.
51005002957 V01

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>