SANUS VLFS820-B2 TV Bracket Wall Mount Instruction Manual
- June 9, 2024
- SANUS
Table of Contents
- SANUS VLFS820-B2 TV Bracket Wall Mount
- Instruction
- IMPORTANT SAFETY INSTRUCTIONS
- Tools Needed
- Dimensions
- BEFORE YOU BEGIN
- Supplied Parts and Hardware
- Attach TV Brackets to TV
- Attach Wall Plate
- Hang TV onto Wall Plate
- Manage Cables
- TV Adjustments
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SANUS VLFS820-B2 TV Bracket Wall Mount
Instruction
WE’RE HERE TO HELP Want to watch a video that shows how easy this is?
Get it right the first time. Height Finder™ shows you where to drill.
Our live install experts are standing by to help.
Watch it now at: SANUS.com/3119
Use it
now: SANUS.com/2567
Call us
at:
US: +1 800-359-5520
EMEA: +31 (0) 495 580 852
UK: +44 (0) 800 056 2853
IMPORTANT SAFETY INSTRUCTIONS
- PLEASE READ MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
CAUTION: Avoid potential personal injuries and property damage!
- This product is designed ONLY to be installed into wood studs, solid concrete or concrete block
- DO NOT INSTALL INTO DRYWALL ALONE
- DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV
- This product is designed for INDOOR USE ONLY
- The wall must be capable of supporting five times the weight of the TV and mount combined
- Do not use this product for any purpose not explicitly specified by manufacturer
- Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Please read through these instructions completely to be sure you’re
comfortable with this easy install process.
Check your TV owner’s manual to see if there are any special requirements for
mounting your TV.
If you do not understand these instructions or have doubts about the safety of
the installation, assembly or use of this product, contact Customer Service.
TV Weight Limit (including accessories)
DO NOT EXCEED
If your TV (plus accessories) weighs MORE, this mount is NOT compatible.
Visit SANUS.com or call customer service to find a compatible mount.
Wall Construction
ONLY install on these acceptable wall types.
Unsure
Call Customer Service
US: 1-800-359-5520
EMEA: +31 (0) 495 580 852
UK: +44 (0) 800 056 285
CAUTION:
DO NOT install in drywall alone
Drywall alone will NOT hold the weight of your TV.
Tools Needed
Dimensions
BEFORE YOU BEGIN
Remove the stand
from your TV — if attached.
Install any accessories
you may have purchased, if they require TV removal prior to assembly. The TV
is removable for future accessory purchases.
Protect the face of your TV when laying it down for installation.
Supplied Parts and Hardware
WARNING: This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and
undamaged. If any parts are missing or damaged, do not return the damaged item
to your dealer; contact Customer Service. Never use damaged parts!
Attach TV Brackets to TV
Select TV Screw Diameter
Select TV Screw Length and Spacers
NO SPACER
- Flat Back TV [TV brackets lay flat on your TV]
SPACER NEEDED
- Flat Back TV with extra space needed [for deep inset holes or cable interference]
- Rounded or Irregular Back TV [TV brackets NOT resting flat on your TV]
CAUTION: Verify adequate thread engagement with your screw
01 , washer 02 , spacer 03 combination AND TV bracket 04 . Too short will not
hold your TV. — Too long will damage your TV.
Attach TV Brackets to Your TV
CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws 06 only enough to secure the TV brackets to the TV.
Attach Wall Plate
Wood Stud Installation
CAUTION: Avoid potential personal injury or property damage!
- Drywall covering the wall must not exceed 5/8 in. (16 mm)
- Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
- Minimum spacing between studs: 16 in. (406mm)
- Stud center must be verified
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 2 3/4 in. (7 cm),
using a 7/32 in. (5.5 mm) diameter drill bit.
CAUTION: Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt 09 . Tighten the
lag bolts 09 and lag washers 10 only until they are pulled FIRMLY against the
wall plate 08 . DO NOT over-tighten the lag bolts 09 . Go to STEP 3 on PAGE 8.
Solid Concrete or Concrete Block Installation
CAUTION: Avoid potential personal injury or property damage!
- Mount wall plate 08 directly onto concrete surface (no wall covering)
- Minimum solid concrete thickness: 8 in. (203 mm)
- Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
- Minimum spacing between lag bolts is 16 in.
- For concrete applications, arm assembly 11 (STEP 3) must remain centered in wall plate 08 .
- Keep this in mind when selecting wall plate location
Concrete Anchors are not included
Contact Customer Service:
US: 1-800-359-5520
EMEA: +31 (0) 495 580 852
UK: +44 (0) 800 056 285
to inquire about the concrete anchors.
CAUTION: Never drill into the mortar between blocks.
CAUTION: Be sure the anchors C1 are seated flush with the concrete
surface.
CAUTION: Avoid potential personal injury or property damage! Improper use could reduce the holding power of the lag bolt 09 . Tighten the lag bolts 09 and lag washers 10 only until they are pulled FIRMLY against the wall plate 08 . DO NOT over-tighten the lag bolts 09 .
Hang TV onto Wall Plate
Attach Arm Assembly to Wall Plate
HEAVY! You may need assistance with this step.
CAUTION: Avoid potential personal injury or property damage!
For CONCRETE APPLICATIONS: The arm assembly 11 MUST remain centered in
wall plate 08.
NOTE: For WOOD STUD APPLICATIONS, the arm assembly 11 can be slid
anywhere along wall plate 08 for optimal positioning of your TV.
Attach TV to Arm Assembly
HEAVY! You may need assistance with this step.
Manage Cables
- IMPORTANT: Fully extend arm assembly 11 to ensure enough slack in cables. 2.
- Route your cables through the arm assembly 11 as shown.
TV Adjustments
TILT ADJUSTMENT
Your TV should adjust easily when moved, then stay in place. If your TV is too loose or too tight use the hex key 15 for additional tightening of the right and left tilt tension screws T .
LEVEL ADJUSTMENT
LATERAL SHIFT
HEAVY! You may need assistance with this step.
CAUTION: Avoid potential injuries or property damage!
Do NOT adjust the arm position from center for concrete applications. Arm 11
MUST remain centered in wall plate 08 for all concrete applications!
- Remove your TV (PAGE 9).
- Open the cover plates, remove two screws 12 , and loosen screws at bottom of arm S to release arm assembly 11
- Reposition the arm assembly 11 on the wall plate (STEP 3.1).
- Reattach the two screws 12 (STEP 3.1), tigthen the screws at the bottom of arm S , and close the cover plates.
- Hang your TV onto the arm assembly 11 following STEP 3.2.
REMOVING THE TV
HEAVY! You may need assistance with this step.
REMOVING THE ARM
Thank you for choosing Sanus! Please take a moment to let us know how we did:
Legrand AV Inc.
6436 City West Parkway
Eden Prairie, MN 55344 USA
US: +1 800-359-5520
SANUS.com
Legrand AV Netherlands B.V.
Franklinstraat 14
6003 DK Weert Netherlands
EMEA: +31 (0) 495 580 852
UK: +44 (0) 800 056 2853
SANUS.com
Authorized Representative for the UK
Starline Holding Technology Ltd.
Unit C Island Road
Reading RG2 0RP UK
Legrand AV Inc. and its affiliated corporations and subsidiaries
(collectively, “Legrand”), intend to make this manual accurate and complete.
However, Legrand makes no claim that the information contained herein covers
all
details, conditions, or variations. Nor does it provide for every possible
contingency in connection with the installation or use of this product. The
information contained in this document is subject to change without notice
or obligation of any kind. Legrand makes no representation of warranty,
expressed or implied, regarding the information contained herein. Legrand
assumes no responsibility for accuracy, completeness or sufficiency of the
information contained in this document.
©2022 Legrand AV Inc. All rights reserved. SANUS is a brand of Legrand. SANUS,
HeightFinder and the SANUS logo are trademarks of Legrand.
Legrand AV Inc. • 6436 City West Parkway • Eden Prairie, MN 55344 USA
References
- SANUS | #1 Brand of TV Wall Mounts in the U.S.
- SANUS | #1 Brand of TV Wall Mounts in the U.S.
- HeightFinder | SANUS
- SANUS VLFS820 | Full-Motion Wall Mounts | TV Mounts and Stands | Products | SANUS