lyft STN020D Bikeshare Docking Station User Manual
- June 9, 2024
- lyft
Table of Contents
STN020D Bikeshare Docking Station
User Manual
FCC Notices
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
Introduction
The Bikeshare Docking Station is responsible for storage and rental of a micromobility vehicle (e.g., e-bike, scooter). It is designed for installation in a fixed, outdoor location. Station status and unlocking requests are communicated to backend systems via a cellularconnection. The unit also displays the status of the Station and the related Vehicle using the indicators on the front panel.
Operation
The Bikeshare Docking Station looks like this to the user: A user is able to unlock a bike by interacting with the Station via an NFC card or smartphone, or via the Vehicle directly.
Accessory List
No accessories are to be used with this device.
Safety Precautions
The module is not user serviceable. Do not open the Bikeshare Docking Station
unless you are explicitly authorized to do so and trained on how to do so by
Lyft personnel. Changes or modifications not expressly approved by Lyft are
not permitted.
Operating Conditions
The device is intended for use between -20°C (-4o F) and 50° C (122° F)
Electrical Supply:
| Parameter | Value |
|---|---|
| Input Voltage | 9V min 12V typical 13V max |
| Operating Current | 1A Max |
| Power Draw | 12W Max |
Model: STN020D
Lyft, Inc.
185 Berry St, Suite 5000, San Francisco, CA 94107
Last Modified: 2022-08-10
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>