ASUS AI2201 D First Edition ROG Phone User Guide

: June 9, 2024
: Asus

Table of Contents

AI2201 D First Edition ROG Phone
Front features
**FCC Statement (HAC)
Canada, Industry Canada (IC) Notices
Safety information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AI2201 D First Edition ROG Phone
User Guide

AI2201 D First Edition ROG Phone

First Edition / May 2022
ASUS Phone (Mobile Phone)
Model: ASUS Al2201 Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device.
NOTES:

For the complete E-Manual and more detailed information, refer to https://www.asus.com/support/.
Illustrations are for reference only. Actual product appearance may vary.

Front features

Federal Communications Commission Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and ® receiver.
Connect the equipment into an outlet ona circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products that are marketed in US must be fixed to US-operated channels only.
The responsible party within the USA per 47 CFR Part 2.1077(a)(3):
ASUS COMPUTER INTERNATIONAL (America)
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Telephone: +1-510-739-3777
RF Exposure Information (SAR)
This device has been tested and meets applicable limits for Radio Frequency (RF) exposure.
Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and body. Carry this device at least 15 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body- worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified, and use such accessories should be avoided. The highest FCC SAR values for the device (ASUS_AI2201_D) are as follows:

1.19 W/Kg @1g(Head)
0.95 W/Kg @1g(Body)

The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fecid after searching on FCC ID: MSQAI2201.

**FCC Statement (HAC)

**

This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.
The Federal Communications Commission has implemented rules and a rating system designed to enable people who wear hearing aids to more effectively use these wireless telecommunications devices. The standard for compatibility of digital wireless phones with hearing aids is set forth in American National Standard Institute (ANSI) standard C63.19-2011. There are two sets of ANSI standards with ratings from one to four (four being the best rating): an“M’ rating for reduced interference making it easier to hear conversations on the phone when using the hearing aid microphone, and a“T” rating that enables the phone to be used with hearing aids operating in the telecoil mode thus reducing unwanted background noise.
The Hearing Aid Compatibility rating is displayed on the wireless phone box.
A phone is considered Hearing Aid Compatible for acoustic coupling (microphone mode) if it has an“M3” or“M4″ rating. A digital wireless phone is considered Hearing Aid Compatible for inductive coupling (telecoil mode) if it has a“T3″ or“T4″ rating. The tested M-Rating and T-Rating for this device (ASUS_AI2201_D) are M3 and T3.
You’ll want to try a number of wireless phones so that you can decide which works the best with your hearing aids. You may also want to talk with your hearing aid professional about the extent to which your hearing aids are immune to interference, if they have wireless phone shielding, and whether your hearing aid has a HAC rating.

Canada, Industry Canada (IC) Notices

This device complies with Industry Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause interference; and
This device must accept any interference, including & interference that may cause undesired operation of the ® device.

This device for operation in the band 5150-5350 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device (ASUS_AI2201_D) has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”) limits when installed in specific host products operated in portable exposure conditions.
Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng.
Additional Canadian information on RF exposure also can be found at the following web address: http://www.ic.gc.ca/eic/site/smt- gst.nsf/eng/sf08792.html.
This equipment should be installed and operated with minimum distance 15 mm between the radiator and your body.
CAN ICES-003(B)/NMB-003(B)
This Class B digital apparatus complies with Canadian ICES-003.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter, except tested built-in radios.
The County Code Selection feature is disabled for products that are marketed in the US/ Canada.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume levels for long periods. A pleine puissance,
For France, headphones/earphones for this device are compliant with the sound pressure level requirement laid down in the applicable EN 50332-1:2013 and/or EN50332-2:2013 standard required by French Article L.5232-1.

Safety information

CAUTION! Use of controls or adjustments or performance of procedures other than those specified herein may result in 5 hazardous radiation exposure.
ROG Phone care

Use your ROG Phone in an environment with ambient temperatures between 0 °C (32 °F) and 35 °C (95 °F).

The battery
WARNING: Disassembling the battery by yourself will void its warranty and may cause serious harm.
Your ROG Phone is equipped with a high performance nondetachable Li-polymer battery. Observe the maintenance guidelines for a longer battery life.

Do not remove the non-detachable Li-polymer battery as this will void the warranty.
Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C.
Do not remove and replace the battery with a non-approved battery.
Use only ASUS battery. Using a different battery may cause physical harm/injury and may damage your device.
Do not remove and soak the battery in water or any other liquid.
Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin.
Do not remove and short-circuit the battery, as it may overheat and cause a fire. Keep it away from jewelry or metal objects.
Do not remove and dispose of the battery in fire. It could explode and release harmful substances into the environment.
Do not remove and dispose of the battery with your regular household waste. Take it to a hazardous material collection point.
Do not touch the battery terminals.
To avoid fire or burns, do not disassemble, bend, crush, or puncture the battery.

NOTES:

Risk of explosion if battery is replaced by an incorrect type.
Dispose of used battery according to the instructions.

The charger

Use only the charger supplied with your ROG Phone.
Never pull the charger cord to disconnect it from the power socket. Pull the charger itself.

Caution
Your ROG Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the AC Adapter.

Do not use the ROG Phone in an extreme environment where high temperature or high humidity exists. The ROG Phone performs optimally in an ambient temperature between 0 °C (32 °F) and 35 °C (95 °F).
Do not disassemble the ROG Phone or its accessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shock or fire may result.
Do not short-circuit the battery terminals with metal items.

Operator access with a tool
If a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access.
General Usage (typical body-worn) (for Japan)
This device (front & rear side) should be operated under a separation distance of 15 mm from the human body.
*The other four sides are not in close proximity to the human body at the general use as described above.
5GHz band (W52,W53): Indoor use only (Except for the 5.2GHz transmission with High Power Data Communication System Base Station or Relay Station). 5.2/5.3GHz
India E-waste (Management) Rules 2016
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01 % by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule Il of the Rule.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our & commitment to the highest standards for protecting our ® environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.
Proper disposal
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.
DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and ercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw this product in fire. DO NOT short 2 circuit the contacts. DO NOT disassemble this product.
NOTE: For more legal and e-labelling information, check on ® your device from Settings > System > Regulatory labels and Settings > System > About Phone> Legal Information.
ASUS
Address: 1F., No.15, Lide Rd., Beitou Dist., Taipei City 112,
Taiwan
Tel: 886228943447
Fax: 886228907698
We declare that the IMEI codes for this product, ROG Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards.
Should you have any questions or comments regarding this matter, please contact us.
Sincerely yours,
ASUSTEK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Support: https://www.asus.com/support/
Copyright © 2022 ASUSTeK COMPUTER INC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website, and shall remain the exclusive property of ASUS and/or its licensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECTO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.
ZenTalk Fans Forum (http://www.asus.com/zentalk/global_forward.php)

http://www.asus.com/zentalk/global_forward.php

ASUS Warranty Information Form
IMPORTANT! Please store this card ina secured location for future reference. ASUS reserves the right to request this document before accepting repair requests. This does not affect or limit your mandatory statutory rights. Please fill in your product information in the form.
Mr/Mrs./Ms/Miss:………….
Telephone Number:……
Address:………….
E-mail:………
Purchase Date: ………../ / (DD/MM/YYYY)
Dealer’s Name:….
Dealer’s Telept Numk…….
Dealer’s Add…..
A. Product Warranty Period and Notice:

This warranty (“Commercial Warranty Period”) applies for the same period as the Legal Warranty period regulated by the local government. This warranty begins at the date of delivery that is shown on the proof of purchase (“Delivery Date”). If proof of purchase cannot be provided, the manufacture date as recorded by ASUS will be deemed to be the start of the Warranty Period.
Accessories delivered together with the product are not covered under the warranty.
Please fully back up all the data stored on your product and remove any personal, confidential, or proprietary information before & requesting any warranty service process. ASUS may delete any data, ® software, or programs installed on your product without restoring or transferring them. ASUS shall not be held liable for the permanent loss, damage, or misuse of your data.

B. Exclusions from the Warranty Service:
(a) Damage caused to this Product(s) by you or any non-authorized third party;
(b) The serial number of the Product, components or accessories has been altered, cancelled or removed;
(c) The warranty seals have been broken or altered;
(d) Obsolescence;
(e) Damage (accidental or otherwise) to the product that does not impact the product’s operation and functions, such as without limitation to rust, change in color, texture or finish, wear and tear, and gradual deterioration;
f )Damage to the Product caused by war, terrorism, fire, accident, natural disaster, intentional or accidental misuse, abuse, neglect or improper maintenance, and use under abnormal conditions;
g) Damage to the product caused by an external electrical fault or any accident;
(h) Damage to the product resulting from use outside of the operation, storage parameters, or environment detailed in the User’s Manual;
i) Damage to the product caused by third party software or virus(es); or there is software loss or data loss that may occur during repair or replacement;
j) Unusability of or damage to the product caused by contamination with hazardous substances, diseases, vermin, or radiation;
k) Fraud, theft, unexplained disappearance, or damages / detrimental circumstances caused by a willful act of the customer; and
(l Unusability or damage to hardware of the product caused by installing and using any kind of the Unlock Device App, which is a utility that will unlock your product’s boot loader but will render the warranty null and void.
C . Out-of-Warranty Cases: If the warranty period has lapsed or if any of the exclusions above apply, your request will be deemed out of warranty and a charge will incur on it.
D . Warranty and Support: The warranty service may vary by country. If you make a purchase in the European Union, European Economic
Area, Switzerland or certain countries in the Western Balkans, ASUS supports warranty service within warranty period in the countries
above. Some countries may have fees, restrictions or additional documentation needed on the warranty service.
E . Abandon Property: After your product has been repaired, or if you reject the repair, ASUS will notify you to pick up your product. If you fail to do it within a period of 90 days from ASUS’ notice, ASUS reserves the right to (i) dispose the product in accordance with the applicable laws and regulations; (ii) claim damages from you, including costs associated with storage, disposal of the product and any statutory right of lien for unpaid charges.
F. Privacy: ASUS conduct privacy practices on your personal data in compliance with ASUS Privacy Policy: Visit http://www.asus.com/support of Use Notice Privacy Policy/Privacy Policy/ for further
ASUS contact details
This warranty is provided by: ASUSTeK
Computer Inc.
1 F., No. 15, Lide Rd., Beitou Dist.,
Taipei City 112, Taiwan
Phone: +886-2-2894-3447

http://qr.asus.com/support

FCC COMPLIANCE INFORMATION Per FCC
Part 2 Section 2.1077
Responsible Party: Asus Computer International
Address: 48720 Kato Rd, Fremont, CA 94538
Phone/Fax No: (510)739-37771(510)608-4555
hereby declares that the product
Product Name : ROG Phone 6 (Al2201)
Model Number : ASUS_AI2201_D
compliance statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.