SECOMP 21143514 4 Port Nway Gigabit Ethernet Switch User Manual
- June 9, 2024
- SECOMP
Table of Contents
SECOMP 21143514 4 Port Nway Gigabit Ethernet Switch
FCC Warning
This device has been tested and found to comply with limits for a Class B
digital device, pursuant to Part 2 and 15 of FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates and radiates radio frequency energy and, if not installed
and used in accordance with the user’s manual, it may cause interference in
which case users will be required to correct interference at their own
expenses
CE Warning
This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.
Introduction
This switch provides 4 10/100/1000M ports. It was designed for easy installation and high performance in an environment where traffic is on the network and the number of users increases continuously.
The pocket size was specifically designed for small to medium workgroups. It can be installed where space is limited; moreover, it provides smooth network migration and easy upgrade to network capacity.
Besides, this switch can be used in rooms with limited power outlet by supporting USB port powered operation.
Package Contents
Before you start to install this switch, please verify your package that contains the following items:
- One Gigabit Ethernet Switch
- One USB Cable
- User’s Manual
- Power Adapter
- 2 x Magnets
- 4 x Rubber Feet
Note: If any of these items is found missing or damaged, please contact your local supplier for replacement.
Key Features
- 4 Port 10/100/1000M Nway (Auto-negotiation) Switch
- Pocket size with metal case
- Auto-learn of networking configurations
- Auto-detect full/half-duplex modes for any port
- Dedicated full-duplex 200Mbps bandwidth
- Store-and-Forward switching methods
- IEEE 802.3x flow control for full-duplex and back-pressure flow control for half-duplex
- Non-blocking & Non-head-of-line blocking full wire speed forwarding
- Auto-MDI/MDI-X function for any port
- Smart plug & play
Front Panel (LEDs)
LED Indicators of 4 Port 10/100/1000M Switch
| LED | Status | Operation |
|---|---|---|
| Power | On | Power is on. |
| Off | Power is off. | |
| LINK/ACT | On | Port is for connection |
| Off | No connection. | |
| Flashing | Data is transmitting or receiving. |
Technical Specifications
Standards
| IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3x
Flow control
---|---
Features
| Number of Ports: 4 MAC Address: 1K Buffer Memory: 104KB Jumbo Frames: 9K
Transmission Method: Store and Forward
Filtering/ Forwarding Rates| 1000Mbps port – 1,488,000pps 100Mbps port –
148,800pps 10Mbps – 14,880pps
Transmission Media| 10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5E UTP/STP
LED
Indicators
| Per Port: LINK/ACT Per Unit: Power
Power Supply| DC 5V/1.2A
Power Consumption| ** 2.5 Watts (Max)
Dimensions| 62 x 79.5 x 21 mm (W x D x H)
Weight| 164 g
Operating Temperature| 0 to 40℃
Storage Temperature| -20 to 90℃
Humidity| 10 to 90% RH (non-condensing)
Certifications**| FCC Class B, CE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>