SECOMP 14025029 USB 3.2 Gen 1 Hub 7 Port User Manual
- June 9, 2024
- SECOMP
Table of Contents
USB 3.2 Gen 1 Hub, 7 Port
User Manual
Before attempting to connect, operate or adjust this product, please save and read the User’s Manual completely. The style of the product shown in this User’s Manual may be different from the actual unit due to various models.
Safety Instructions
Always read the safety instructions carefully.
- Keep this User’s Manual for future reference
- Keep this equipment away from humidity
- If any of the following situation arises, get the equipment checked by a service technician:
• The equipment has been exposed to moisture.
• The equipment has been dropped and damaged.
• The equipment has obvious sign of breakage.
• The equipment has not been working well or cannot get it to work according to the User’s Manual.
Copyright
This document contains proprietary information protected by copyright. All right are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.
Trademarks
All trademarks and registered trademarks are the property of their respective owners or companies.
Introduction
USB 3.2 Gen 1 7-Port Hub with power is the ideal solution for transferring data between your computer and external USB storage devices. The main feature of USB 3.2 Gen 1 7-Port Hub is that it is equipped with two power supply ports (BC1.2 Charging ports) and provides power saving mode (five normal ports). Furthermore, USB 3.2 Gen 1 7-Port Hub guarantees the electric current stability and the effective operation of connected USB devices. It does not require any software or any installation process. With a portable design, it can save you desk space.
Features
- Provides USB 3.2 Gen 1 7-port hub design
- Backward compatibility with USB 2.0 specification
- Supports Low speed (1.5 Mbps)/Full speed (12 Mbps)/High speed (480 Mbps)/Super speed (5 Gbps)
- Supports auto switching between self-power and bus-power mode
- Supports most popular smart phones charging
Package Content
- USB 3.2 Gen 1 7-Port Hub x1
- USB 3.2 Gen 1 Cable x1
- User’s Manual x1
- Power Adapter x1
- Power Cord x1(12V/3A Adapter only)
System Requirements
- Works with Windows 10
Mac OS X 10.8.
Product Overview
Panel
| Item | Description |
|---|---|
| 1 DC Power Jack | Connect to the supplied power adapter. |
| 2 USB 3.2 Gen1 Charging Port | Connect to an USB device. (two BC1.2 |
Charging ports)
3 USB 3.2 Gen1 Input| Connect to a computer.
4 LED indicator| On
5 USB 3.2 Gen1 Output| Connect to an USB device (5 ports)
Installation Verification
Please connect this hub to a PC by an USB 3.2 Gen1 cable. The system will detect the device and install the required drivers automatically. After the installation is finished, you can go to Device Manager to verify the entire installation.
In Windows, expand the item of Universal Serial Bus Controller , the device will be displayed on the list when the device is working properly.
Note: If there is a (question) or (exclamation) mark next to that item, then the hub is not properly installed. Please delete the item, unplug the hub and re-plug again.
For Mac, search the item of USB under System Report.
On Mac OS X 10.8:
Follow the path as below to open the Hardware List: Apple Menu on the
top corner \About This Mac\More Info\System Report\USB\USB 3.0 SuperSpeed
Bus
Documents / Resources
|
SECOMP 14025029 USB 3.2 Gen 1 Hub 7
Port
[pdf] User Manual
14025029 USB 3.2 Gen 1 Hub 7 Port, 14025029, USB 3.2 Gen 1 Hub 7 Port, Gen 1
Hub 7 Port, Hub 7 Port, Port
---|---