POTTER HUB-M Single Button Hold Up Switch Owner’s Manual
- June 9, 2024
- POTTER
Table of Contents
POTTER HUB-M Single Button Hold Up Switch
UL and ULC Listed
- Dimensions: 2″ W x 2 5/16″ L x 1″ H 5,1cm W x 5,9cm L x 2,5cm H
- Weight: 1.5 oz. 42,5 g.
- Switch Rating: 3 Amps at 28V DC/AC.05 Amp at 125V DC Resistive
- Enclosure: ABS Plastic
- Temperature Range: 32°F to 140°F (85% maximum humidity) Environmental Limitations: Not recommended for outdoor use or
HUB-M (Shown Without Cover)
The Model HUB-M provides momentary or latching DPDT contacts for actuating surveillance cameras or other security applications.
Installation
Install in accordance with UL 681. Devices should be installed so they cannot
be observed by the public and so they can be operated inconspicuously. At
least one shall be installed in each vault open during business hours. In
banks they shall also be installed in offi ces commanding a view of the public
space.
Converting The HUB-M To Optional
Latching Operation Remove the installed button cap and discard. Replace with alternate latching cap (supplied). Align the cap such that the latching mechanism is directly under the latching ramp in the cover. See illustration.
To unlatch the HUB-M, insert a small pointed object, such as a pocket screwdriver or paper clip into the reset hole. The unit unlatches when the cap is released.
- address: Potter Electric Signal Company
- 2081 Craig Road, St. Louis, MO, 63146-4161
- Phone: 800-325-3936/Canada 888-882-1833
- ww.pottersignal.com
- firealarmresources.com
References
- Fire Alarm Resources | Download fire alarm documents
- Potter Electric: Fire Alarms & Fire Sprinkler Systems