POTTER RMS6T Pull Station Single Action DPDT Instruction Manual
- June 9, 2024
- POTTER
Table of Contents
POTTER RMS6T Pull Station Single Action DPDT Instruction Manual
This product is a high quality initiating device suitable for use in hazardous areas including outdoor applications. It is important to read all information pertaining to this device and its application.
Electrical Rating
Contacts: D.P.D.T.
Contact Rating: 10 amps @125/250 VAC
Wireawg: 14 to 22 AWG
Wiring Hookup: Terminal block (#6-32 w/sem plate)
Terminal Block Layout
UL Rating
Class
- I
- II
- III
Group
- B,C,D.
- E,F,G
Type 4X (out door)
Grounding
Wiring Hookup
BASIC ASSEMBLY
BEFORE CLOSING ASSEMBLY
- Make sure that mating surfaces are clean and free of debris.
- Inspect to assure all 0-ring seals are in their place. If not, carefully reinstall making sure of proper fit.
- Squeeze insulator inward and slip cover assembly over back box making sureinsulator are inside back box.
- Before tightening assembly -check to make sure of proper seating.
Note: Do not substituite 0-rings or cover screws with other hardware,as this may degrade or produce failure of device. (Replacement seals and extra hardware are upon request).
INSTALLING OPTION – LP
(Lift & Pull Dual action)
INSTALLING OPTION – DAH
(Break glass adaptor – Dual action)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>