Milwaukee M12 Nailers and Staplers User Guide
- June 9, 2024
- Milwaukee
Table of Contents
Milwaukee M12 Nailers and Staplers
GET EXCLUSIVE ACCESS
WHEN YOU SIGN UP FOR HEAVY DUTY NEWSLETTER
VISIT MILWAUKEETOOL.COM TO SIGN UP
- Heavy Duty Newsletter
- Contests & Giveaways
- Access to e-Service
- ONE-KEY Inventory Management
SERVICE GUIDE
Remove battery and nails from magazine. Proceed to the next step accordingly.
TO RESET STRIKER
- Check for incorrect striker position, it may or may not be visible. If striker does not require a reset, see steps for clearinga jammed nail.
- Adjust contact bracket all the way out to the minimum depth. Attach charged battery. Power tool back on.
- Press contact bracket against a hard surtace that can be damaged. Pull and hold back the nail pusher. Fire tool. You will hear striker reset itself.
- Remove battery. Load nails back in tool. Re-attach battery. Tool is now ready for use.
TO CLEAR JAMMED NAIL
- Remove the magazine using the provided hex tool to unscrew the 3 screws highlighted in the photo.
- Check for jammed nail.
- Use tool to remove jammed nail.
- Line up and re-attach the magazine. Reload the magazine and re-attach battery. Tool is now ready for use.
SERVICE
- milwaukeetool.com/eservice
- 1-800-SAWDUST (1-800-729-3878)
- milwaukeetool.com/support/find-a-service-center
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>