GALLAGHER 701028 Turbo Star Horse Corner Insulator Instruction Manual

GALLAGHER 701028 Turbo Star Horse Corner Insulator

INSTALLATION

1. Description: A hand is shown holding the insulator and positioning it onto a wooden post.
2. Description: The hand pushes down the insulator onto the post, aligning it with an arrow indicating the downward motion.
3. Description: A close-up of the insulator attached to the post with the tape threaded through it.
4. Description: A side view of the fully installed insulator on the post with the tape secured in place.

STRAINING

1. Description: A hand uses a tool to tighten a screw on the insulator, which secures the tape.
2. Description: The hand pulls the tape through the insulator, indicating the direction of the strain to be applied.
3. Description: The tape is shown taut and secured in the insulator after the straining process.

PLATE CONFIGURATIONS

1. Description: The insulator is shown mounted onto a corner plate with the tape passing through it.
2. Description: A different angle showing the insulator attached to a corner plate with the tape threaded and screws tightened.
3. Description: An end view of the insulator with the tape looped around and secured, demonstrating an alternative configuration.

Specifications

FAQ

How do you install the Gallagher Tape Insulator? Installation involves positioning the insulator onto a post, pushing it down to secure, threading the tape through, and finally, tightening it in place. What should be done to strain the tape correctly? Use a tool to tighten the insulator’s screw and pull the tape through the insulator to apply tension. Are there different plate configurations for the insulator? Yes, the insulator can be mounted onto a corner plate, with the tape passing through it or looped around in an alternative configuration.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>