EUROFRED DS-9KKD WIFI Split Mural Cool Pro Air Conditioner User Manual
- June 9, 2024
- EUROFRED
Table of Contents
EUROFRED DS-9KKD WIFI Split Mural Cool Pro Air Conditioner
Remote controller
Remote controller
The remote controller transmits signals to the system.
❶ ON/OFF BUTTON
The appliance will be started when it is energized or will be stopped when it
is in operation, if you press this button.
❷ MODE BUTTON
Press this button to select the operation mode.
❸ FAN BUTTON
Used to select fan speed in sequence auto, high, medium or low.
❹ ❺ ROOM TEMPERATURE SETTING BUTTONS
Used to adjust the room temperature and the timer, also real time.
❻ TURBO BUTTON
Used to start or stop the fast cooling. (Fast cooling operates at high fan
speed with 16oC set temp automatically.)
❼ SWING BUTTON
Used to stop or start vertical adjustment louver swinging and set the desired
up/down airflow direction.
❽ SLEEP BUTTON
Used to set or cancel Sleep Mode operation.
❾ LIGHT BUTTON
When you press this button, all the display of indoor unit will be closed.
❿ CLOCK BUTTON
Used to set the current time.
⓫ TIMER ON/OFF BUTTON
Used to set or cancel the timer operation.
⓬ ECO BUTTON
Used to set or cancel Economy Mode operation.
❺+❼ 8ºC HEAT
Press them together for 3 seconds to start or stop 8ºC HEAT mode.
⓯ MUTE BUTTON
Press it once, the MUTE function will be started.
Press it again, the MUTE function will be shut off. Use to set CLEAN mode
operation.
⓱ IFEEL BUTTON
Used to set IFEEL mode operation. Press it once, the IFEEL function will be
started. Press it again, the IFEEL function will be shut off.
If the IFEEL function can’t be shut off, please try to press this button about
5 seconds. Advice to put the remote controller in the place where the indoor
unit receive signal easily. Advice to cancel the IFEEL mode so as to save
energy when stopping the air conditioner.
⓫ ⓬ LOCK
Press them together for 3 seconds to start or stop LOCK operation.
Indication symbols on LCD:
Cooling indicator
Dry indicator
Fan only indicator
Heating indicator
Turbo indicator
Auto fan speed
High fan speed
Medium fan speed
Low fan speed
Mute indicator
Airflow up and down indicator
Smart indicator
Sleep indicator
8ºC Heating indicator
Economy indicator
I feel
Signal transmit
Display set timer Display current time
Display temperature
Lock
Note: Each mode and relevant function will be further specified in following pages.
-
How to Insert the Batteries
Remove the battery cover according to the arrow direction.
Insert new batteries making sure that the (+) and (-) of battery are matched correctly.
Reattach the cover by sliding it back into position.
Note: -
Use 2 LR03 AAA (1.5volt) batteries. Do not use rechargeable batteries.
Replace batteries with new ones of the same type when the display becomes dim
-
Storage and Tips for Using the Remote Controller
The remote controller may be stored mounted on a wall with a holder.
Note: The remote controller holder is an optional part.
-
How to Use
To operate the room air conditioner, aim the remote controller to the signal receptor. The remote controller will operate the air conditioner at a distance of up to 7m when pointing at signal receptor of indoor unit.
CAUTIONS
For appropriate signal transmission between remote controller and indoor unit,
keep the signal receiver away from the following items:
- Direct sunlight or other strong lights or heat
- Flat panel television screen or other electrical appliances that react to the remote controller
Additionally, the air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor unit. If the signal may not be transmitted properly, either move these materials or consult your local dealer.
Operation instructions
Operation modes
Heating mode is NOT available for cooling only air conditioner.
At “FAN ONLY” mode, only “Higher”, ”High”, “Medium” “Low” and ”Lower” are
available. At “DRY” mode, Fan speed is set at “Auto” automatically, “FAN”
button is ineffective in this case.
Range of available set temperature
*HEATING, COOLING| 16ºC-30ºC
Note: Heating mode is NOT available for cooling only models.
Note: Press and hold “ ” button and “ 
”
button together for 3 seconds will alternate the temperature display together
for 3 seconds will alternate the temperature display between the ºC and °F
scale.
SWING, SMART, TIMER ON, TIMER OFF, CLOCK, SLEEP, will be specified in the
following pages.
- Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
- During heating operation, air flow is not discharged at the beginning. After 2-5 minutes, the air flow will be discharged until temperature of indoor heat exchanger rises.
- Wait 3 minutes before restarting the appliance.
Airflow direction control
Vertical airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle as you
like.
Swinging airflow
Pressing button once, the vertical adjustment louver will swing up and down
automatically.
Desired direction airflow
Pressing the button again when the louvers swing to a suitable angle as
desired.
** A** Do not turn the vertical adjustment louvers manually, otherwise
malfunction may occur. If that happens, turn off the unit first and cut off
the power supply, then restore power supply again.
**B** It is better not to let the vertical adjustment louver tilt downward
for a long time at COOLING or DRY mode to prevent condensed water from
dripping
CLOCK button
You can adjust the real time by pressing CLOCK button, then using “ ” and “ ” buttons to get the correct time, press CLOCK button again the real time is set.
Timer mode
It is convenient to set the timer on with TIMER ON button when you go out in the morning to achieve a comfortable room temperature at the time you get home. You can also set timer off at night to enjoy a good sleep.
How to set TIMER ON
TIMER ON button can be used to set the timer programming as wished in order
to switch on the appliance at your desired time.
i) Press TIMER ON button, “ON 12:00” flashes on the LCD, then you can press
the “ ” or “ ” buttons to select your desired time for appliance on.
Press the “ ” or “ ” button once to increase or decrease the time setting by 1
minute.
Press the “ ” or “ ” button 2 seconds to increase or decrease the time setting
by 10
minutes.
Press the “ ” or “ ” button for a longer time to increase or decrease the time
by 1 hour
Note: If you don’t set the time in 10 seconds after you press TIMER ON button, the remote controller will exit the TIMER ON mode automatically.
ii) When your desired time displayed on LCD, press the TIMER ON button and
confirm it. “ON” stops flashing.
The TIMER indicator on the indoor unit lights up.
iii) After the set timer displayed for 5 seconds the clock will be displayed
on the LCD of the remote controller instead of set timer.
How to cancel TIMER ON
Press the TIMER ON button again, the indicator disappears, the TIMER ON mode
has been canceled.
Note: It is similar to set TIMER OFF, you can make the appliance switch off
automatically at your desired time.
SLEEP mode
SLEEP mode can be set in COOLING, HEATING or DRYING operation mode.
This function gives you a more comfortable environment for sleep.
In SLEEP mode,
-
The appliance will stop operation automatically after operating for 8 hours.
-
Fan speed is automatically set at low speed.
-
*Set temperature will rise by 1ºC at most if the appliance operates in cooling
mode for 1 hour constantly, then keeps steady. -
Set temperature will decrease by 3ºC at most if the appliance operates in
heating mode for 3 hours constantly, then keeps steady
For some models, such as G1Q series
- *Set temperature will rise by 2ºC at most if the appliance operates in cooling mode for 2 hour constantly, then keeps steady.
- Set temperature will decrease by 2ºC at most if the appliance operates in heating mode for 2 hours constantly, then keeps steady
*Note: In cooling mode, if room temperature is 26ºC or above, set
temperature will not change.
Note: Heating is NOT available for cooling only air conditioner.
Note: Press TURBO, ON/OFF, FAN, MODE, ECO or SLEEP button cancel SLEEP
mode.
SLEEP mode
TURBO mode
TURBO mode is used to start or stop fast cooling when the unit is on.
TURBO mode can be set when the appliance is in operation or energized.
In TURBO mode, you can set airflow direction or timer.
-
How to set TURBO mode?
Press TURBO button at the cooling, fan only or dry mode.
Result: At high fan speed, the set temperature automatically to 16ºC.
Press TURBO button at the heating mode.
Result: At AUTO fan speed, the set temperature automatically to 30ºC
-
How to cancel TURBO mode?
Press TURBO, MODE, FAN, ON/OFF, SLEEP, TURBO or MUTE button.
Result: The display return to the original mode.
Escape from TURBO mode.
8ºC HEAT mode
In HEATING mode, Press and buttons together for 3 seconds to start 8ºC HEAT
mode.
In 8°C HEAT mode, the fan speed is set at “AUTO” automatically. The icon will
appear on the LCD.
If pressing any button, other than ON TIMER, OFF TIMER, DIMMER, IFEEL and SWING, 8°C HEAT function will be turned off. And the icon will disappear.
Note:
In 8°C HEAT mode, the default temperature is set 8ºC.
8°C HEAT mode can be set only when the air conditioner works in HEATING mode.
Only for models with 8°C HEAT function.
LOCK function
LOCK function
-
TIME ON and TIME OFF buttons together for 3 seconds to start LOCK function.
The icon will appears on the LCD. -
TIME ON and TIME OFF buttons together for 3 seconds again to stop LOCK function.
The icon will disappeared from the LCD
MUTE mode
MUTE mode
In this mode, the air conditioner will work with low noise performance.
In this mode, you can start the SLEEP mode at the same time.
Note:
- MUTE button is only available in COOLING, HEATING and FAN ONLY mode.
- Press MODE, FAN SPEED, SMART or SUPER button to cancel MUTE mode.
ECO mode
ECO mode
In this mode, the air conditioner will bring you energy saving performance
by lower running currency.
Note :
- ECONOMY button is ineffective in SMART and SUPER mode.
- SMART and SUPER buttons are not available in ECONOMY mode.
- Press ON/OFF, MODE, TEMP ±, FAN SPEED, SLEEP, QUIET or ECONOMY button to cancel ECONOMY mode.
IFEEL function
FEEL function
The temperature sensor built in remote controller is activated. It can sense
its surrounding
temperature, and transmit the signal back the unit, the unit can adjust the
temperature so as to provide maximum comfort.
Note:
Advice to put the remote controller in the place where the indoor unit
receive signal easily.
Advice to cancel the IFEEL mode so as to save energy when stopping the air
conditioner.
Quick Start Guide
Follow these four easy steps to set up your appliance
① Install the appliance and turn it on.
② Open Android Play Store or I OS App Store in your smart phone, then enter
“Connect life” in the Search bar to find the latest version. Download and
install it. Connect life
③ Follow Wi-Fi instruction to pair with your appliance.
④ Manage and enjoy complete control over your appliance.
QR
Code for Android
|
QR
Code for iOS
---|---
Eurofred S.A.
Marqués de Sentmenat 97
08029 Barcelona
www.eurofred.es
Documents / Resources
|
EUROFRED DS-9KKD WIFI Split Mural Cool Pro Air
Conditioner
[pdf] User Manual
DS-9KKD WIFI, DS-12KKD WIFI, DS-18KKD WIFI, DS-24KKD WIFI, DS-9KKD WIFI Split
Mural Cool Pro Air Conditioner, Split Mural Cool Pro Air Conditioner, Mural
Cool Pro, Air Conditioner
---|---