Starlyf Security Cam Manual

Starlyf Security Cam Manual

Safety Warning

• Keep out of reach of children. This is not a toy.
• Usage temperature range: Do not expose the product to temperatures below 0°C or above 40°C.
• Usage ambient humidity: The cam is not water resistant. When setting the cam up outdoors, ensure it will not be exposed to rainwater.
• Keep it away from strong magnetic fields and high-voltage areas.
• Cleaning requirements: Do not store the cam without protection in places where the density of dust is too high to keep dust out of the cam and other parts and thus affects the cam’s useful life.

Product Description

• A. ON/RECORD and OFF button
• B. LED pilot light
• C. Cam lens
• D. Infra-red lights
• E. Microphone
• F. 8 GB SD memory card (not included)
• G. Micro SD card slot
• H. Charge port
• I. Swivel clip
• J. Adhesive tape
• K. Attachment clip
• L. USB cable
• M. Screws
• N. Anchors
• O. Reset hole

The set contains:

• 1 Starlyf® Security Cam
• 1 USB cable
• 1 Instruction manual
• 1 Attachment clip
• 2. Screws
• 2. Anchors
• 1 Swivel clip

Congratulations on your purchase of the STARLYF® SECURITY CAM, a small, discreet video cam that lets you record everything that happens inside and outside the house when you’re not at home.
Please read the instructions before using the product for the first time. Keep these instructions in a safe place for future reference.

Features

• Compact design.
• Compatible with videos in AVI format.
• Records high-quality images even in dim lighting.
• 720p video resolution and recording at 30 frames per second.
• Compatible with micro SD cards of up to 32 GB.
• Built-in rechargeable lithium battery.

Battery charging:
The cam comes with a rechargeable lithium battery. Charge it before using the cam for the first time. The cam will take six hours to charge the first time and two hours after that. Charge the battery as follows:

Battery indicator:
Turn on the cam by pressing the ON/RECORD and OFF button (A) for four seconds. If the LED pilot light (B) stays red, the battery is charged. When the red light starts blinking, the battery is running out. We recommend charging the battery as soon as possible.

Charging on the computer:
Plug one end of the USB cable (L) into the charge port (H) on the cam (Figure 3) and the other end into the USB port on the computer (Figure 4). While the cam is charging, the LED pilot light (B) will blink alternately red and blue.
While the cam is charging on the computer, it will NEVER record at the same time.

Recording and charging the battery at the same time:
To record and charge at the same time, YOU WILL ALWAYS have to charge using a mains plug (not included). We recommend purchasing the Starlyf® Security Cam plug, which comes with a 180 cm cable so the cam can be placed where you want it.

1. To record and charge the cam in a mains socket, we recommend using the swivel clip (I) and the attachment clip (K) to firmly attach the cam (Figure 5). Follow the directions below for assembling the swivel clip and the attachment clip.

2. When the cam is firmly attached to the swivel clip and the attachment clip (see Figure 6), plug one end of the USB cable (L) into the charge port (H) and the other end into the wall socket (Figure 7).

3. While the cam is charging in the wall socket, the red LED pilot light (B) will blink every three seconds.
   While the cam is charging in the wall socket, the cam is charging and recording at the same time.

4. When the cam is fully charged, the LED pilot light (B) will stay red.

Note:
When you record and take pictures, always make sure the cam is in the right position so that the image does not need to be rotated. When the lens is pointing at you, the button (A) should be on your right. See Figure 2.

Video recording:
The Starlyf® Security Cam works with micro SD cards (not included). We recommend purchasing Starlyf® Security Cam SD cards.

1. Insert the memory card (F) into the micro SD card slot (G). Insert the card perpendicular to the cam slot. (See Figure 8)
2. Press the ON/RECORD and OFF button (A) for four seconds. The red LED pilot light (B) will come on and the cam will start recording when it detects movement.

The Starlyf® Security Cam will automatically start loop recording for more efficient use of the memory card. When no movement is detected for one minute, the cam will stay on, but will stop recording.
Night mode: The Starlyf® Security Cam records when it detects movement, even in the dark. Its infrared lights (D) are activated, but not visible.

Photo mode:

1. When the cam is in video mode (red LED pilot light), press the ON/RECORD and OFF buttons (A) for two seconds. The LED pilot light will turn blue when the cam is ready to take photos. Take photos by quickly pressing the photo button.
2. To go back to video mode, press the ON/RECORD and OFF button (A) for two seconds. The red LED pilot light (B) will come on and the cam will start recording when it detects movement.

Downloading photos and videos:

1. Press the memory card with your fingertip. Once the card ejects from the camera, remove it and insert it into a card reader (not supplied). Connect the card reader to the computer.
2. If you do not have a card reader, you can connect the cam to the computer using the USB cable (L). See Figures 3 and 4.
3. A folder will then be created where you can view, save and delete the videos and photos recorded with the Starlyf® Security Cam.

Tips:

• a. If the cam is connected to the computer but is not recognized or the removable disk icon is not visible in 30 seconds, try connecting it again.
• b. We recommend copying and deleting the video file and saving it on the computer. This will provide for smoother viewing.

Assembling the swivel clip (I) and attachment clip (K)

Attachment clip (K):

1. Place the back part of the cam against the attachment clip (K) and press gently to attach it. Make sure the clip slides into the grooves at the top and bottom on the back of the cam. See Figure 9. It is properly attached when you hear a click.
2. The clip on the attachment clip can be used to firmly attach the cam to clothing (see Figure 10) and other items. Ensure the cam is in the right recording position.
3. To remove the camera from the attachment clip (K), remove it by pressing the upper parts of the clip with the fingernail. (See Fig. 18)

Swivel clip (I) on horizontal surfaces:

1. Attach the cam to the attachment clip (K), as explained above.
2. Clip the attachment clip (K) (see Figure 11) to the swivel clip (I), as shown in Figure 12.
3. The swivel clip has many different positions. Place it on the horizontal surface of nyour choice and point the cam where you want to record a video or take a photo.See Figure 13.

Swivel clip (I) on vertical surfaces:

Attaching with adhesive tape:
You can attach the swivel clip to a vertical surface using the adhesive tape (J).

1. Remove the protective backing from the adhesive tape (J) and stick it to the back of the base of the swivel clip (I). Press to ensure it is firmly attached. See Figure 14.
2. Remove the protective backing from the other side of the adhesive tape stuck to the swivel clip (I).
3.  Attach the swivel clip (I) to your surface. Press to ensure it is firmly attached. See Figure 15.

Attaching with screws:
The swivel clip can be attached using the screws (M) and anchors (N) supplied.

1. Make two holes in the wall of the right diameter for the two anchors (N) after carefully measuring the distance between the holes.

2. Place the anchors in the holes.

3. Place the swivel clip on top so that both holes are aligned with the holes with the anchors.

4. Attach using the two screws (M).
   When the swivel clip is attached to the surface:

5. Clip the attachment clip (K) with the cam to the swivel clip. See Figure 16.

6. The swivel clip has many different positions. Point the cam where you want to record a video or take a photo. See Figure 17.

Reset mode
If the cam does not work due to improper use or for unknown reasons, it should be reset.
Use a needle or pin to press the button in the reset hole (O) next to the charge port.
The default settings will be restored and the cam should work correctly again.

Technical Specifications:

• 720p HD recording
• Motion activated
• Loop recording
• Total recording time: 45 min
• Supports memory cards up to 32 GB (not included)
• Rechargeable 160 mAh lithium-ion battery
  Warning: The ® symbol indicates that the products that bear it have been registered by their owners.

Quality Warranty:

This product is covered by a warranty against manufacturing defects subject to the time periods stipulated by the legislation in force in each country. This warranty does not cover damages resulting from inadequate use, negligent commercial use, abnormal wear and tear, accidents or improper handling.

Australia & New Zealand only
This product has the benefit of certain Consumer Guarantees. These are prescribed by the Australian Consumer Law & the New Zealand Consumer
Guarantees Act 1993 both of which provide protection for consumers. There is no express warranty for this product in Australia or New Zealand. The above paragraph refers to other countries.

CAUTION
DISPOSAL OF MATERIALS
A symbol of a crossed-out wheeled bin means you should find out about and follow local regulations about disposing of this kind of product. Do not dispose of this product as you would other household waste.
Dispose of this device in accordance with the corresponding local regulations. Electrical and electronic devices contain hazardous substances that can have harmful effects on the environment and/or human health and should be recycled.

Download PDF: Starlyf Security Cam Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>