MSI ‎GTX 1650 Super Gaming X 4GB Ddr6 128-Bit User Guide

MSI ‎GTX 1650 Super Gaming X 4GB Ddr6 128-Bit User Guide

Package Contents

(Please con sult y ou r re ta ile r if a nything is missing o r damaged.)

1. Grap h ics ca.rd.
2.  Use.r M an u al or Qu ick Guide (depends on the produ ct).

Precautions for use

1. T he warranty does n ot cover d e fects or malfunction ns caused by run ning the p recessing
   u nit a n d/or memory out of product s pecification s. also known as o ve rocking .

2. .Altering or updating graphics card’s BIOS ‘Without MS I a Urho r nation will vo id you r warranty.

System Requirement

1. PCI Express-compliant motherboard one dual-width x16 graphics slot
2. A monitor with at least one input conn ecto.- equivalent to the output connectors of ‘1,,’01_4 graphics card.
3. Microsoft’s Windows° 7, Windows; 1. 0 or later, or Linux operating system (depends on the produ ct)_
4. At least 1.5 .3B of available hard-disk space. Auxiliary Tools 1. Phillips head screwdriver. This can be used to do most of the installation. A scre•ydriver %,..4.ith a magnetic head makes the prc…ceEs a lot easier_

Auxiliary Tools

1. Phillips head screwdriver: This can be used to do most of the installation. A screwdriver •with a magnetic head makes the process a lot easier_ Hardware Installation

2. Turn off the computer and unplug the power cable. Then open your computer case by removing the side panel.
   Remove any expansion bracket on the back of your case which may obstruct your new graphics card. If you are replacing a graphics card. make sure to hold the graphics card bracket in place and carefully loosen the screws. Then unplug any supplementary
   PCIe power connectors on the card and carefully remove the card using the release clip on the PCIe socket on the motherboard.

3. Position the graphics card directly over the empty PCIe slot and press one end of the card into the slot first. Gently but firmly press the other end until it is fully seated in the slot (you will hear a click). Secure the bracket of the graphics card to your case ‘evith screws, 3_ Connect any supplementary PCIe 6/8-pin power connector.

4. Close your computer case back up and plug in the power cable. Conned the output of your graphics card to your monitor with a display cable.

Software Installation

1. Turn on your computer and let it boot into your operating system.
2. Open a web browser, go to www.msi.com and go to the webpage of the graphics card you have installed.
3. Click ‘SUPPORT” to see an overview of the Drivers and Utilities for your specific product. a.
   Driver: Choose operating system and download the driver. Alternatively. you can download the driver directly from the NVIDIA or AMD official website (depending on the GPU of your card). b. Dragon Center: Please download the software and follow the steps to complete the installation. (Requires Microsoft’ Windows’ 10 or later) ”
   To control the graphics card’s LED effects. please run the Dragon Center software first and then activate the Mystic Light function. c.
   Afterburner: Choose appropriate operating system and download it, then follow the steps to complete the installation. d. Live Update: If your graphics card is not yet supported by the Dragon Center, you can download and launch the Live Update to keep your graphics card’s driversfbios/firrnware up-to-date.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>