COVANA OASIS Hot Tub Cover User Guide
- June 9, 2024
- COVANA
Table of Contents
COVANA OASIS Hot Tub Cover
The safest spa cover in the world!
The world’s only automated gazebo for hot tubs provides security, privacy,
energy efficiency, and peace of mind.
Hot tub compatibility
Most square, rectangular, or round hot tubs with a flat surface (no protruding
headrests) of up to 92″ x 98″ with a height between 34″ and 48″. The
dimensions of the Standard (Std) and Long Side (LS) models are illustrated
below. The dashed line dimensions include the recommended clearance for
maintenance. It is important to take the entrance location in consideration
when choosing between the Standard (Std) and Long Side (LS) models. If you
don’t know which model to choose, or if you are unsure whether your spa will
fit under the cover or not, please contact Covana for the Technical Support
department: 1-877-278-8010.
The seal of the cover will have to be installed on a flat surface on the
acrylic of the hot tub. The minimum turn radius of the seal is 4″. Ensure the
seal will be able to go all around the hot tub while continuously touching the
inner shell. The colored area illustrated below is where the seal must be
applied. Therefore, it will be impossible to apply the seal on an area smaller
than 65″ x 70″.
Colors and patterns
-
cover pattern
Two patterns to choose from. -
cover color
Two colors to choose from.
Options
Integrated led mood lighting
Designed to create ambiance, warmth and a cozy atmosphere, with a choice of
seven colors.
Retractable shades
The shades provide additional protection from the wind and harsh elements.
Most importantly they provide coveted privacy from curious onlookers.
Choosing the perfect location
- The Covana cover can be installed either indoors or outdoors.
- Away from flood zone, water downpours or debris falling.
- Wind speed should not exceed 30 mph in the raised position.
- Operating area must be free from obstacles, i.e., branches or electrical power lines.
- Allow for safe access to the spa, free of obstacles or debris.
- Sunlight must not converge or be directly reflected on the cover such as the reflection from a window.
- The installation area must be clean and free of any vegetation (i.e., grass, branches, roots) and mineral contaminants (i.e., rocks, dust, sand).
- The key switch must be permanently mounted and located 5 ft away from the spa and 5 ft above the deck or ground level in a location where no water downpour or debris could fall on it.
- The user must have a clear view of the cover when operating it (25-ft cable).
SCAN ME!
Laying the right foundation
- A clean, flat and level surface such as an engineered wood deck or a concrete slab is needed.
- The foundation must be able to support at least 600 lb.
- Any water accumulating around the cover will have to be drained.
- Allow for at least 24″ of clearance for maintenance on the motor and entrance sides, and 6″ on the other sides.
- The four jacks will have to be properly anchored to the foundation (anchors not included).
Minimum base size
Contact Covana if the foundation is already in place and its dimensions are
smaller than those illustrated below.
Electrical specifications
- All electrical work should be done by a certified electrician, otherwise the certification and warranty will be void.
- The cover requires a dedicated single-phase 115 VAC (North America) or 230 VAC (Europe) hard-wired power supply.
- The cover must be installed in accordance with and comply with all applicable local codes and regulations.
- Wires and conduits should be sized according to local codes and regulations.
North American requirements
European requirements
Planning the delivery
The Oasis cover will be delivered in a wooden crate. Take the time to sketch
out a simple map from the delivery point to the installation point for the
delivery personnel. You can also disassemble the unit from the crate at the
delivery point and move the parts by hand.
NOTE: The largest and heaviest part will be the cover assembly weighing
approximately 200 lb.
Use this simple checklist to plan the delivery route.
- automobiles/recreational vehicules
- trees/foliage / shrubs
- gutter / facia / soffit overhang
- patio furniture/deck chairs
- electrical / gas meter equipment
- fences or narrow gates
- doghouse/playhouse
- gravel, rocks or wood piles
- stairs / steps / railings
- adequate access to wood decks
- uneven ground
- door openings (if applicable)
- slippery slope or path
- sheds or built-in structures
Your heaven of relaxation and privacy
The manufacturing process and the choice of materials lend COVANA products
exceptional quality, performance and durability.
For more information, contact Covana or visit our Web site:
covana.com
info@covana.com
COVANA is a member of Canimex Group, committed to excellence since 1969.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>