FUFU GAGA KF210153-03 L Shaped Wooden 3 Drawer Desk Instruction Manual
- June 9, 2024
- FUFU GAGA
Table of Contents
KF210153-03 L Shaped Wooden 3 Drawer Desk
Instruction Manual
IMPORTANT INFORMATION!
please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference.
AVOID SCRATCHES!
In order to avoid scratching this furniture should be assembled on a soft
layer-could be a rug.
IMPROVE EFFICIENCY!
Try to find a partner to install with you, which can speed up the installation
efficiency and shorten the time.
ANTI -TOPPLE WARNING!
Overturned furniture can cause serious or fatal crush injuries. To prevent
tipping over, be sure to use the wall attachment, if not included with this
product. Please purchase the wall attachment that fit your wall. If unsure,
seek professional advice. Please read and follow each step of the instructions
carefully.
Slides Must Be Separated Before Assembly.
After Separated, Set Aside Until Needed for Assembly.
STEP 1: Extend Slide
STEP 2: Push Lever UP
STEP 3: Remove Runner
Separate glide into two parts.
Fix No.3 slide rail to No.12 and No.13 plate with screw(D) as shown.
Insert quick fit screw(A) into corresponding holes in No.13 and No.14 plate
with a screwdriver as shown.
Connect No.13 and No.14 plate with
No.16 using wooden dowel(C) and turn cam locks(B) clockwise to tighten as
shown.
Insert quick fit screw(A) into corresponding holes in No.12 plate with a screwdriver as shown.Connect No.13 and No.12 plate with No.15 using wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
Insert quick fit screw(A) into corresponding holes in No.10 plate with a screwdriver as shown. Attach No.10 plate to No.11, No.12, No.13 and No.14 using wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
Insert quick fit screw(A) into corresponding holes in another No.10 plate with
a screwdriver as shown.
Cover No.10 plate to No.11, No.12, No.13 and No.14 using wooden dowel(C) and
turn cam locks(B) clockwise to tighten as shown.
Please don’t use an electric drill or use force to rotate, may cause crack.
Fix hinge(F) to No.17 plate with screw(D) as shown.
Attach No.17 plate to No.14 by fixing hinge with screw(D).
Fix handle(Q) with screw(E).
Stick foot pad(P) to the bottom as shown.
Insert part(G) into No.11 and No.12 plate, place No.18 shelf in as shown.
Assemble No.6, No.7 and No.8 plate together as shown.
Attach No.1 iron frame to these plates and fix with screw(H) and (J) as
shown.
Fix No.4 and No.5 iron sheet to the component with screw(K) as shown.
Rotate foot pegs(N) into No.2 leg
at first.
Assemble No.2 leg to the iron frame with screw(J) as shown.
Fix No.2 leg with No.7 plate together using screw(K) as shown.
Fix the desk to sideboard using screw(J) as shown.
Or if you wanna the item is flexible, just stick nonslip mat(I) to corresponding position, then attach the desk to sideboard.
Connect No.21 and No.22 plate with No.20 using screw(L) as shown.
Slide No.9 plate into available slots as shown.
Insert quickfit screw(A) into No.19 plate as shown.
Attach No.19 plate to the component and turn cam lock(B) clockwise to tighten
as shown.
Fix handle(Q) to No.19 plate with screw(E).
Fix No.3 runner to No.21 and No.22 plate with screw(M) as shown.
Align rails, slide all drawers.
If there is misalignment after you install, adjust the screw to the best condition
WARRANTY
WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
- The product must be used in accordance with the instructions provided. For health reasons.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty. Attention please.
- Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
- After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
- If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns.
DEFECTIVE ITEMS
- If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us.
DAMAGED ITEMS
- If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order.
Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardize your chances of making a claim, and you may not receive a credit for the return.
Version: 09/29/2022