SECOMP 12021107 USB 3.0 3 Port Hub with Gigabit Ethernet Adapter Installation Guide
- June 9, 2024
- SECOMP
Table of Contents
SECOMP 12021107 USB 3.0 3 Port Hub with Gigabit Ethernet Adapter
Driver Installation
Caution: DO NOT connect the Ethernet adapter to your computer before you install the provided driver. You will be instructed to do so later.
For Windows° XP/ VWindows Vista/ Windows 7/ Windows 8
- Insert the provided CD into your disc drive. Locate and double-click the Setup.exe file in the Driver folder to launch the setup program.
- Wait for the program to install the drivers.
- Click Finish to complete the installation.
- Connect the Ethernet adapter’s USB end to a free USB port of your computer. At this stage, different situations may occur according to your operation system.
Mac OS°X v10.6-10.8
- Insert the provided CD and double-click the AX88179.pkg file in the Driver folder on Mac OS° X v10.6 at least.
- Click Continue to install and it will restart your computer automatically.
- Connect the Ethernet adapter to a free USB port. You can Click System Report on the desktop to check if the installation is completed.
- Connect the Ethernet adapter to a free USB port. Then a New port Detected screen will prompt, and you will find that a new Ethernet network interface is available.
Connecting to Your Network
Now the installation is completed. You can connect the adapter to your network
devices such as a hub, switch, or router by an Ethernet cable. The Link LED
should light up to indicate a proper physical connection between the adapter
and the network.
Notice: The hub bus power may not meet higher power need like 2.5” HDD. In this case, we suggest that you use a power adapter for the power needed.
This Quick Installation Guide describes only the basic instructions on installation. For more information, please refer to the User’s Manual on the provided CD-ROM.