FrSKY FAS7 ADV Lite 7 Amp and Voltage Sensor Instruction Manual
- June 9, 2024
- Frsky
Table of Contents
FrSKY FAS7 ADV Lite 7 Amp and Voltage Sensor Instruction Manual
Introduction
Thank you for purchasing FrSkyCurrent Sensor – FAS7 ADV. It is designed for FrSky Smart Port (compatible with SPORT/FBUS protocol) enabled system, and can measure Current (A) and Battery Voltage (V) when connected between a Battery. In order to fully enjoy the benefit of it, please read the instruction manual carefully and set up the device as described below.
Note:
All instructions, warranties, and other collateral documents are subject to
change at the sole discretion of FrSky Electronic Co., Ltd. For further
information, please visit www.frsky-rc.com and click the support tab for this
product.
Overview
Specifications
- Dimension: 32.6×16×6.1mm (L×W×H)
- Weight: 2.1g
- Measurement range: 0-7A (1%）
- Current consumption: 11mA@5V
- Maximum safe current: 7A
- Measuring voltage: ≤32V
- Supplying voltage (S.Port): 3.5-10V
- Compatible: FrSky Smart Port enabled receivers (compatible with SPORT/FBUS protocol).
Protocol switching
Connect the output Port of the sensor to the receiver, select SPORT/FBUS on
the receiver setup screen, the sensor will automatically recognize.
Set-Up
FrSky Current Sensor – FAS7 ADV is compatible with FrSky Smart Port-enabled receivers. For more details, please refer to the corresponding receiver instruction manual.
Warning:
Install FrSky Current Sensor – FAS7 ADV on any appropriate surface of the
airframe that stays away from water, vibration, or fuel.
Other FrSky S.Port-enabled sensors include a new Smart Port-enabled Variometer Sensor, GPS Sensor, RPM Sensor, Airspeed Sensor, and so on.
ID Set Up
Each type of FrSky sensor has its unique physical ID. The default physical ID
for this sensor is 02. The ID number could be changed by Free Link
(Windows/android/ios).
Note: All sensors could daisy chain with each other through their Smart Port.
LED Status
| LED Status | S.Port | FBUS |
|---|---|---|
| Flash slowly | YES | NO |
| Flash quickly | NO | YES |
FrSky is continuously adding features and improvements to our products. To get the most from your product, please check the download section of the FrSky website www.frsky-rc.com for the latest updated firmware and manuals.
FrSky Electronic Co., Ltd. www.frsky-rc.com.
Contact us: frsky@frsky-rc.com.
Address F-4, Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi,
214125, Jiangsu, China Technical Support:
sales4tech@gmail.com.