MSI MAG B560M BAZOOKA Motherboard User Guide

MSI MAG B560M BAZOOKA Motherboard

Quick Start
Thank you for purchasing the MSI® motherboard. This Quick Start section provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code.

Installation

Installing a Processor

Installing DDR4 memory

Connecting the Front Panel Header
http://youtu.be/DPELIdVNZUI
http://v.youku.com/v_show/id_XNjcyMTczMzM2.html

Installing the Motherboard

Connecting the Power Connectors
http://youtu.be/gkDYyR_83I4
http://v.youku.com/v_show/id_XNDkzODU0MDQw.html

Installing SATA Drives
http://youtu.be/RZsMpqxythc
http://v.youku.com/v_show/id_XNDkzODU5MTky.html

Installing a Graphics Card
http://youtu.be/mG0GZpr9w_A
http://v.youku.com/v_show/id_XNDkyOTc3MzQ4.html

Connecting Peripheral Devices
Power On

Safety Information

• The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly.
• Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.
• Hold the motherboard by the edges to avoid touching sensitive components.
• It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard.
• Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed.
• Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.
• Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user.
• If you need help during any installation step, please consult a certified computer technician.
• Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.
• Keep this user guide for future reference.
• Keep this motherboard away from humidity.
• Make sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the electrical outlet.
• Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
• All cautions and warnings on the motherboard should be noted.
• If any of the following situations arises, get the motherboard checked by service personnel:
  • Liquid has penetrated into the computer.
  • The motherboard has been exposed to moisture.
  • The motherboard does not work well or you can not get it work according to user guide.
  • The motherboard has been dropped and damaged.
  • The motherboard has obvious sign of breakage.
• Do not leave this motherboard in an environment above 60°C (140°F), it may damage the motherboard.

Case stand-off notification
Before installing the motherboard into the case, install first the necessary mounting stand-off required for a motherboard on the mounting plate in the case.
To prevent damage to the motherboard, any unnecessary mounting stand-off between the motherboard circuits and the computer case is prohibited. The Case standoff keep out zone signs will be marked on the backside of motherboard (as shown below) to serve as a warning to user.

Specifications

CPU|

• Supports 10th Gen Intel® Core™ Processors, 11th Gen Intel® Core™ Processors, Pentium® Gold and Celeron® Processors*
• Processor socket LGA1200
• Please go to intel.com for compatibility information

---|---
Chipset| Intel® B560 Chipset
Memory|

• 4x DDR4 memory slots, support up to 128GB*
• Supports 1R 2133/ 2666/ 2933 MHz for 10th Gen Intel® CPU (by JEDEC & POR)*
• Supports 1R 2133/ 2666/ 2933/ 3200 MHz for 11th Gen Intel® CPU (by JEDEC & POR)*
• Max overclocking frequency:
• 1DPC 1R Max speed up to 5066 MHz
• 1DPC 2R Max speed up to 4600+ MHz
• 2DPC 1R Max speed up to 4266+ MHz
• 2DPC 2R Max speed up to 4000+ MHz
• Supports Dual-Channel mode
• Supports non-ECC mode, un-buffered memory
• Supports Intel® Extreme Memory Profile (XMP)
• Please refer www.msi.com for more information on compatible memory.

Expansion Slot|

• 1x PCIe x16 slot
• PCI_E1 (From CPU)
• Supports up to PCIe 4.0 for 11th Gen Intel® CPU
• Supports up to PCIe 3.0 for 10th Gen Intel® CPU
• 2x PCIe 3.0 x1 slots
• PCI_E2 & PCI_E3 (From B560 chipset)

Onboard Graphics|

• 1x HDMI 2.0b with HDR port, supports a maximum resolution of 4K 60Hz*/**
• 1x DisplayPort 1.4 port, supports a maximum resolution of 4K 60Hz*/**
• Available only on processors featuring integrated graphics.
• Graphics specifications may vary depending on the CPU installed.

Storage|

• 6x SATA 6Gb/s ports (From B560 chipset)

• 2x M.2 slots (Key M)

• M2_1 slot

• Supports up to PCIe 4.0 x4 for 11th Gen Intel® CPU (From CPU)

• Supports up to PCIe 3.0 x4 for 10th Gen Intel® CPU (From B560 chipset)

• Supports SATA 6Gb/s (From B560 chipset)*

• Supports 2242/ 2260/ 2280/ 22110 storage devices

• M2_2 slot** (from B560 chipset)

• Supports up to PCIe 3.0 x4

• Supports 2242/ 2260/ 2280 storage devices

• Intel® Optane™ Memory Ready*

• Supports Intel® Smart Response Technology for

• Intel Core™ processors
  SATA2 will be unavailable when installing M.2 SATA SSD in the M2_1 slot.

• Before using Intel® Octane™ memory modules, please ensure that you have updated the drivers and BIOS to the latest version from MSI website.

---|---
USB| Intel® B560 Chipset

• 2x USB 3.2 Gen 2 10Gbps Type-A ports on the back panel
• 4x USB 3.2 Gen 1 5Gbps ports (2 Type-A ports on the back panel, and 2 ports are available through the internal USB 3.2 Gen 1 5Gbps connector)
• 2x USB 2.0 Type-A ports on the back panel
• USB Hubs GL850G
• 4x USB 2.0 ports are available through the internal USB 2.0 connectors

Audio| Realtek® AL897 Codec
7.1-Channel High Definition Audio
LAN| 1x Realtek® RTL8125B 2.5Gbps LAN controller
Internal Connectors|

• 1x 24-pin ATX main power connector
• 1x 8-pin ATX 12V power connector
• 6x SATA 6Gb/s connectors
• 2x M.2 slots (M-Key)
• 1x USB 3.2 Gen 1 5Gbps connector (supports additional 2 USB 3.2 Gen 1 ports)
• 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
• 1x 4-pin CPU fan connector
• 1x 4-pin water-pump fan connector
• 2x 4-pin system fan connectors
• 1x Front panel audio connector
• 2x System panel connectors
• 1x Chassis Intrusion connector
• 1x Clear CMOS jumper
• 1x TPM module connector
• 1x Serial port connector
• 1x Tuning Controller Connector

---|---
LED Features|

• 1x 4-pin RGB LED connector
• 1x 3-pin RAINBOW LED connector
• 4x EZ Debug LED

Back Panel Connectors|

• 1x PS/2 keyboard/ mouse combo port
• 2x USB 2.0 Type-A ports
• 1x DisplayPort
• 1x HDMI port
• 2x USB 3.2 Gen 2 10Gbps Type-A ports
• 1x 2.5G LAN (RJ45) port
• 2x USB 3.2 Gen 1 5Gbps Type-A ports
• 3x audio jacks

I/O Controller| NUVOTON NCT6687 Controller Chip
Hardware Monitor|

• CPU/ System/ Chipset temperature detection
• CPU/ System/ Pump fan speed detection
• CPU/ System/ Pump fan speed control

Form Factor|

• Micro-ATX Form Factor
• 9.6 in. x 9.6 in. (24.4 cm x 24.4 cm)

---|---
BIOS Features|

• 1x 256 Mb flash
• UEFI AMI BIOS
• ACPI 6.2, SMBIOS 3.0
• Multi-language

Software|

• Drivers
• MSI Center
• Intel® Extreme Tuning Utility
• MSI APP Player (Blues tacks)
• Open Broadcaster Software (OBS)
• CPU-Z MSI GAMING
• Google Chrome™, Google Toolbar, Google Drive
• Norton™ Internet Security Solution

MSI Center Features|

• MSI Sound Tune
• Gaming Mode
• Creator Mode
• Gaming Highlights
• LAN Manager
• Mystic Light
• Froze AI Cooling
• User Scenario
• True Color
• Live Update
• Monitor
• Super Charger
• Speed Up

Special Features|

• Audio
• Audio Boost
• Cooling
• M.2 Shield Froze
• Pump Fan
•  Smart Fan Control
• LED
• Mystic Light Extension (RAINBOW/RGB)
• EZ DEBUG LED
• Performance
• DDR4 Boost
• Core Boost
• USB 3.2 Gen 2 10G
• Lightning Gen 4 PCI-E Slot
• Lightning Gen 4 M.2
• Protection
• PCI-E Steel Armor
• Experience
• Click BIOS 5

---|---

Package contents

Please check the contents of your motherboard package.
It should contain:

Accessories

| M.2 screw + standoff (2 sets/pack)| 1
IO shielding| 1
Dragon Badge| 1
MAG sticker| 1
Product registration card| 1

Important
If any of the above items are damaged or missing, please contact your retailer.

Rear I/O Panel

LAN Port LED Status Table
Realtek Audio Console
After Realtek Audio Console is installed. You can use it to change sound settings to get better sound experience.

• Device Selection – allows you to select a audio output source to change the related options. The check sign indicates the devices as default.
• Application Enhancement – the array of options will provide you a complete guidance of anticipated sound effect for both output and input device.
• Main Volume – controls the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar.
• Jack Status – depicts all render and capture devices currently connected with your computer.
• Connector Settings – configures the connection settings.
  Audio 7.1-channel Configuration
  To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1 connector and follow the below steps.

1. Click on the Realtek Audio Console > Advanced Settings to open the dialog below.
2. Select Mute the rear output device, when a front headphone plugged in.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into a device at an audio jack, a dialogue window will pop up asking you which device is current connected.

Auto popup dialog

When you plug into a device at an audio jack, a dialogue window will pop up asking you which device is current connected.
Important
The pictures above for reference only and may vary from the product you purchased.

Overview of Components

CPU Socket

Introduction to the LGA 1200 CPU
The surface of the LGA 1200 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator. Important

• Always unplug the power cord from the power outlet before installing or removing the CPU.

• Please retain the CPU protective cap after installing the processor. MSI will deal with Return Merchandise Authorization (RMA) requests if only the motherboard comes with the protective cap on the CPU socket.

• When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.

• Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.

• Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.

• Whenever the CPU is not installed, always protect the CPU socket pins by covering the socket with the plastic cap.

• If you purchased a separate CPU and heatsink/ cooler, Please refer to the
  documentation in the heatsink/ cooler package for more details about installation.

• This motherboard is designed to support overclocking. Before attempting to overclock, please make sure that all other system components can tolerate overclocking. Any attempt to operate beyond product specifications is not recommended. MSI® does not guarantee the damages or risks caused by inadequate operation beyond product specifications.

DIMM Slots

Memory module installation recommendation
Important

• Always insert memory modules in the DIMMA2 slot first.
• To ensure system stability for Dual channel mode, memory modules must be of the same type, number and density.
• Some memory modules may operate at a lower frequency than the marked value when overclocking due to the memory frequency operates dependent on its Serial Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory frequency if you want to operate the memory at the marked or at a higher frequency.
• It is recommended to use a more efficient memory cooling system for full DIMMs installation or overclocking.
• The stability and compatibility of installed memory module depend on installed CPU and devices when overclocking.
• Please refer www.msi.com for more information on compatible memory.

PCI_E1~3: PCIe Expansion Slots

Important

• If you install a large and heavy graphics card, you need to use a tool such as MSI Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot.
• When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion
  card’s documentation to check for any necessary additional hardware or software changes.

SATA1~6: SATA 6Gb/s Connectors

These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device.
Important

• Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise.
• SATA cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.
• SATA2 will be unavailable when installing M.2 SATA SSD in the M2_1 slot.

M2_1~2: M.2 Slots (Key M)
Important

• Intel® RST only supports PCIe M.2 SSD with UEFI ROM.
• Intel® Optane™ Memory Ready for M2_2 slot.

Installing M.2 module

1. Loosen the screws of M.2 SHIELD FROZR heatsink.

2. Remove the M.2 SHIELD FROZR and remove the protective films from the thermal pads of heatsink.

3. Secure the supplied M.2 standoff according to your M.2 SSD length if need.

4. Insert your M.2 SSD into the M.2 slot at a 30-degree angle.

5. Secure the M.2 SSD in place with the supplied M.2 8.5H screw
   Important
   Skips step 3 and step 5, if you install 2280 M.2 into M2_1 slot.
   

6. Put the M.2 SHIELD FROZR heatsink back in place and secure it.

JFP1, JFP2: Front Panel Connectors
These connectors connect to the switches and LEDs on the front panel.
JAUD1: Front Audio Connector
This connector allows you to connect audio jacks on the front panel.
CPU_PWR1, ATX_PWR1: Power Connectors
These connectors allow you to connect an ATX power supply.
Important
Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.
JCOM1: Serial Port Connector
This connector allows you to connect the optional serial port with bracket.
JUSB3: USB 3.2 Gen 1 Connector
This connector allows you to connect USB 3.2 Gen 1 5Gbps ports on the front panel. Important
Note that the Power and Ground pins must be connected correctly to avoid possible damage.
JUSB1~2: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.
Important

• Note that the VCC and Ground pins must be connected correctly to avoid possible damage.
• In order to recharge your iPad, iPhone and iPod through USB ports, please install MSI® Center utility.

CPU_FAN1, PUMP_FAN1, SYS_FAN1~2: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage. However, you can follow the instruction below to adjust the fan connector to PWM or DC Mode manually.
Switching fan mode and adjusting fan speed
You can switch between PWM mode and DC mode and adjust fan speed in BIOS > HARDWARE MONITOR.
Important
Make sure fans are working properly after switching the PWM/ DC mode.
Pin definition of fan connectors
JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable.
Using chassis intrusion detector

1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.
2. Close the chassis cover.
3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
4. Set Chassis Intrusion to Enabled.
5. Press F10 to save and exit and then press the Enter key to select Yes.
6. Once the chassis cover is opened again, a warning message will be displayed on screen when the computer is turned on.

Resetting the chassis intrusion warning

1. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
2. Set Chassis Intrusion to Reset.
3. Press F10 to save and exit and then press the Enter key to select Yes.

JTPM1: TPM Module Connector
This connector is for TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.

JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumpers to clear the CMOS memory.
Resetting BIOS to default values

1. Power off the computer and unplug the power cord.
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and Power on the computer.

JDASH1 : Tuning Controller connector
This connector is used to connect an optional Tuning Controller module.
EZ Debug LED
These LEDs indicate the debug status of the motherboard.
JRGB1: RGB LED connector
The JRGB connector allows you to connect the 5050 RGB LED strips 12V.
RGB LED Strip Connection

RGB LED Fan Connection
Important

• The JRGB connector supports up to 2 meters continuous 5050 RGB LED strips (12V/G/R/B) with the maximum power rating of 3A (12V).
• Always turn off the power supply and unplug the power cord from the power outlet before installing or removing the RGB LED strip.
• Please use MSI’s software to control the extended LED strip.

JRAINBOW1: Addressable RGB LED connector
The JRAINBOW connector allows you to connect the WS2812B Individually Addressable RGB LED strips 5V.
Addressable RGB LED Strip Connection
Addressable RGB LED Fan Connection

CAUTION
Do not connect the wrong type of LED strips. The JRGB connector and the JRAINBOW connector provide different voltages, and connecting the 5V LED strip to the JRGB connector will result in damage to the LED strip.
Important

• The JRAINBOW connector supports up to 75 LEDs WS2812B Individually
  Addressable RGB LED strips (5V/Data/Ground) with the maximum power rating of 3A (5V). In the case of 20% brightness, the connector supports up to 200 LEDs.

• Always turn off the power supply and unplug the power cord from the power outlet before installing or removing the RGB LED strip.

• Please use MSI’s software to control the extended LED strip.

Installing OS, Drivers & MSI Center

Please download and update the latest utilities and drivers at www.msi.com

Installing Windows® 10

1. Power on the computer.
2. Insert the Windows® 10 installation disc/USB into your computer.
3. Press the Restart button on the computer case.
4. Press F11 key during the computer POST (Power-On Self Test) to get into Boot Menu.
5. Select the Windows® 10 installation disc/USB from the Boot Menu.
6. Press any key when screen shows Press any key to boot from CD or DVD… message.
7. Follow the instructions on the screen to install Windows® 10.

Installing Drivers

1. Start up your computer in Windows® 10.
2. Insert MSI® Drive disc into the optical drive.
3. Click the Select to choose what happens with this disc pop-up notification, then select Run DVDSetup.exe to open the installer. If you turn off the AutoPlay feature from the Windows Control Panel, you can still manually execute the DVDSetup.exe from the root path of the MSI Drive disc.
4. The installer will find and list all necessary drivers in the Drivers/Software tab.
5. Click the Install button in the lower-right corner of the window.
6. The drivers installation will then be in progress, after it has finished it will prompt you to restart.
7. Click OK button to finish.
8. Restart your computer.

MSI Center

MSI Center is an application that helps you easily optimize game settings and smoothly use content creation softwares. It also allows you to control and synchronize LED light effects on PCs and other MSI products. With MSI Center, you can customize ideal modes, monitor system performance, and adjust fan speed.
MSI Center User Guide
If you would like to know more information about MSI Center, please refer to
http://download.msi.com/manual/mb/MSICENTER.pdf or scan the QR code to access.
Important
Functions may vary depending on the product you have.

UEFI BIOS

MSI UEFI BIOS is compatible with UEFI (Unified Extensible Firmware Interface) architecture. UEFI has many new functions and advantages that traditional BIOS cannot achieve, and it will completely replace BIOS in the future. The MSI UEFI BIOS uses UEFI as the default boot mode to take full advantage of the new chipset’s capabilities.
Important
The term BIOS in this user guide refers to UEFI BIOS unless otherwise noted.

UEFI advantages

• Fast booting – UEFI can directly boot the operating system and save the BIOS self-test process. And also eliminates the time to switch to CSM mode during POST.
• Supports for hard drive partitions larger than 2 TB.
• Supports more than 4 primary partitions with a GUID Partition Table (GPT).
• Supports unlimited number of partitions.
• Supports full capabilities of new devices – new devices may not provide backward compatibility.
• Supports secure startup – UEFI can check the validity of the operating system to ensure that no malware tampers with the startup process.

Incompatible UEFI cases

• 32-bit Windows operating system – this motherboard supports only Windows 10 64-bit operating system.
• Older graphics card – the system will detect your graphics card. When display a warning message There is no GOP (Graphics Output protocol) support detected in this graphics card.

Important
We recommend that you to replace with a GOP/UEFI compatible graphics card or using integrated graphics from CPU for having normal function.
How to check the BIOS mode?

1. Power on your computer.
2. Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot Menu message appears on the screen during the boot process.
3. After entering the BIOS, you can check the BIOS Mode at the top of the screen.

BIOS Setup

The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS.
Important

• BIOS items are continuously update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be for reference only. You could also refer to the HELP information panel for BIOS item description.
• The BIOS screens, options and settings will vary depending on your system.

Entering BIOS Setup

Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot Menu message appears on the screen during the boot process.
Function key

• F1:  General Help list
• F2:  Add/ Remove a favorite item
• F3:  Enter Favorites menu
• F4:  Enter CPU Specifications menu
• F5:  Enter Memory-Z menu
• F6:  Load optimized defaults
• F7:  Switch between Advanced mode and EZ mode
• F8:  Load Overclocking Profile
• F9:  Save Overclocking Profile
• F10: Save Change and Reset*
• F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).
• Ctrl+F: Enter Search page

When you press F10, a confirmation window appears and it provides the modification information. Select between Yes or No to confirm your choice.
BIOS User Guide
If you’d like to know more instructions on setting up the BIOS, please refer to
http://download.msi.com/manual/mb/Intel500BIOS.pdf
or scan the QR code to access.

Resetting BIOS

You might need to restore the default BIOS setting to solve certain problems.
There are several ways to reset BIOS:

• Go to BIOS and press F6 to load optimized defaults.
• Short the Clear CMOS jumper on the motherboard.
• Press the Clear CMOS button on the rear I/O panel.

Important
Be sure the computer is off before clearing CMOS data. Please refer to the Clear
CMOS jumper/ button section for resetting BIOS.

Updating BIOS

Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive.
Updating BIOS:

1. Insert the USB flash drive that contains the update file into the USB port.

2. Please refer the following methods to enter flash mode.

   • Reboot and press Ctrl + F5 key during POST and click on Yes to reboot the system.
     Press <Ctrl+F5> to activate M-Flash for BIOS update.

   • Reboot and press Del key during POST to enter BIOS. Click the M-FLASH button and click on Yes to reboot the system.

3. Select a BIOS file to perform the BIOS update process.

4. When prompted click on Yes to start recovering BIOS.

5. After the flashing process is 100% completed, the system will reboot automatically.

Updating the BIOS with MSI Center

Before updating:

• Make sure the LAN driver is already installed and the internet connection is set properly.
• Please close all other application software before updating the BIOS.

To update BIOS:

• Install and launch MSI Center and go to Support page.
• Select Live Update and click on Advance button.
• Select the BIOS file and click on Install button.
• The installation reminder will appear, then click the Install button on it.
• The system will automatically restart to update BIOS.
• After the flashing process is 100% completed, the system will restart automatically.

References

• Welcome to MSI Member Account Login | MSI Member Center
• 优酷 - 为好内容全力以赴 - 海量正版高清视频在线观看
• v.youku.com/v_show/id_XNDkzODU0MDQw.html
• v.youku.com/v_show/id_XNjcyMTczMzM2.html
• v.youku.com/v_show/id_XNzUyMTI5ODI4.html
• dtsc.ca.gov/hazardouswaste/perchlorate/
• MSI - Redirect
• csr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>