JBL Tune 720BT Wireless Over-Ear ANC Headphones User Guide
- June 9, 2024
- JBL
Table of Contents
- JBL Tune 720BT Wireless Over-Ear ANC Headphones
- WHAT’S IN THE BOX
- APP
- Power On & Connect
- Multi-point connection
- CONTROLS
- Wired listening mode
- DO MORE WITH THE APP
- Charging
- FACTORY RESET
- Led Behaviors
- TECH SPECIFICATION
- IC RF Exposure Information and Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JBL Tune 720BT Wireless Over-Ear ANC Headphones
WHAT’S IN THE BOX
APP
JBL Headphones
GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH
THIS FREE APP.
Power On & Connect
To enter pairing mode again, power off and hold for 5 seconds.
Multi-point connection
CONTROLS
Wired listening mode
DO MORE WITH THE APP
Charging
FACTORY RESET
Led Behaviors
TECH SPECIFICATION
- Model: TUNE720BT
- Driver size: 40 mm/ 1.57” Dynamic Driver
- Power supply: 5 V 1 A
- Weight: 220 g/ 0.485 lbs
- Battery type: Lithium-ion Battery (500 mAh/ 3.7 V)
- Charging time: 2 hrs from empty
- Music playtime with BT on: Up to 76 hrs
- Talk time: Up to 45 hrs
- Frequency response: 20 Hz – 20 kHz
- Impedance: 32 ohm
- Sensitivity: 101 dB SPL@1 kHz
- Maximum SPL: 95 dB
- Microphone sensitivity: -40 dBV/Pa@1 kHz
- Bluetooth version: 5.3
- Bluetooth profile version: A2DP v1.3.2, AVRCP v1.6.2, HFP v1.7.2
- Bluetooth transmitter frequency range: 2.400 GHz – 2.4835 GHz
- Bluetooth transmitter power: ≤ 10 dBm (EIRP)
- Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8-DPSK
- Maximum operation temperature: 45 °C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTING.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaging over one gram of tissue. Device types: (IC:6132A-TUNE720BT) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.017 W/Kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain metal parts in their assembly. The use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that does not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
WARNING
- DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY
- DO NOT SHORT CIRCUIT
- MAY EXPLODE IF DISPOSED OF IN A FIRE
- RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
- DISPOSE OF OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade names
are those of their respective owners.
Product specifications and app screens are subject to change without notice.
www.quefairedemesdechets.fr.