msi MAG B550 Tomahawk Max Wifi Motherboard User Guide
- June 9, 2024
- MSI
Table of Contents
MAG B550 Tomahawk Max Wifi Motherboard
MAG B550 TOMAHAWK MAX WIFI
Motherboard
User Guide Benutzerhandbuch Manuel d’utilisation
I
English Deutsch Français
II
Quick Start
Thank you for purchasing the MSI® motherboard. This Quick Start section
provides demonstration diagrams about how to install your computer. Some of
the installations also provide video demonstrations. Please link to the URL to
watch it with the web browser on your phone or tablet. You may have even link
to the URL by scanning the QR code.
Kurzanleitung
Danke, dass Sie das MSI® Motherboard gewählt haben. Dieser Abschnitt der
Kurzanleitung bietet eine Demo zur Installation Ihres Computers. Manche
Installationen bieten auch die Videodemonstrationen. Klicken Sie auf die URL,
um diese Videoanleitung mit Ihrem Browser auf Ihrem Handy oder Table
anzusehen. Oder scannen Sie auch den QR Code mit Ihrem Handy, um die URL zu
öffnen.
Présentation rapide
Merci d’avoir choisi la carte mère MSI®. Ce manuel fournit une rapide
présentation avec des illustrations explicatives qui vous aideront à assembler
votre ordinateur. Des tutoriels vidéo sont disponibles pour certaines étapes.
Cliquez sur le lien fourni pour regarder la vidéo sur votre téléphone ou votre
tablette. Vous pouvez également accéder au lien en scannant le QR code qui lui
est associé.
MSI®. , . . , – . , QR-.
MSI® PC URLQR URL
MSI® . . URL . QR URL .
MSI® URL QR code
MSI® QRURL
Quick Start III
Installing a Processor/ Installation des Prozessors/ Installer un processeur/
/ CPU/ / /
Youtube
1
http://v.youku.com/v_show/id_ XMTg2MjMwOTE2NA==.html
3
2
5 4
6 IV Quick Start
8 9
7
If you are installing the screw-type CPU heatsink, please follow the figure
below
to remove the retention module first and then install the heatsink. Wenn Sie
einen CPU-Kühler mit Schraubenbefestigung einsetzen, folgen Sie bitte den
Anweisungen unten um das Retention-Modul zu entfernen und den Kühler zu
installieren. Si vous voulez installer un ventirad pour processeur à vis,
veuillez suivre les instructions ci-dessous pour d’abord retirer le module de
rétention puis installer le ventirad. , . . CPU CPU CPU , . CPU CPU
1
3
2
Quick Start V
Installing DDR5 memory/ Installation des DDR5-Speichers/ Installer une mémoire DDR5/ DDR5/ DDR5 / DDR5 / DDR5 / DDR5
Youtube
http://youtu.be/T03aDrJPyQs http://v.youku.com/v_show/id_XNzUyMTI5ODI4.html
DIMMA2
VI Quick Start
DIMMA2 DIMMB2
DIMMA1 DIMMA2 DIMMB1 DIMMB2
Connecting the Front Panel Header/ Anschließen der
Frontpanel-Stiftleiste/ Connecter un connecteur du panneau
avant/ /
/ /
/
Youtube
http://youtu.be/DPELIdVNZUI http://v.youku.com/v_show/id_XNjcyMTczMzM2.html
POPWOEWRELREHLDD-EDDL+ED
RESET SW POWER SW
Power LED Power Switch
–
-+
++
JFP1
2 1
–
10
9
Reserved
HDD LED Reset Switch
1
HDD LED +
2
3
HDD LED –
4
5
Reset Switch
6
7
Reset Switch
8
9
Reserved
10
Power LED + Power LED Power Switch Power Switch
No Pin
HDD LED POWER LED
HDD LED RESET SW
JFP1
HDD LED HDD LED + POWER LED POWER LED +
Quick Start VII
Installing the Motherboard/ Installation des Motherboards/ Installer la carte mère/ / / / /
Youtube
1
https://v.youku.com/v_show/id_ XNDUwMDUyNTkwOA==.html
Torque:
3 kgf·cm*
3
*3 kgf·cm = 0.3 N·m = 2.6 lbf·in
VIII Quick Start
Connecting the Power Connectors/ Stromanschlüsse anschliessen/ Connecter les câbles du module d’alimentation/ / / / /
Youtube
http://youtu.be/gkDYyR_83I4 http://v.youku.com/v_show/id_XNDkzODU0MDQw.html
ATX_PWR1
CPU_PWR1
Quick Start IX
Installing SATA Drives/ Installation der SATA-Laufwerke/ Installer le disque
dur SATA/ SATA/ SATA / SATA / SATA / SATA
Youtube
1
http://v.youku.com/v_show/ id_XNDkzODU5MTky.html
2 3
X Quick Start
5 4
Installing a Graphics Card/ Einbau der Grafikkarte/ Installer une carte
graphique/ / / / /
Youtube
1
http://v.youku.com/v_show/ id_XNDkyOTc3MzQ4.html
3
2
5 4
6 Quick Start XI
Connecting Peripheral Devices/ Peripheriegeräte/ Connecter un périphérique
anschliessen/ / / / /
Processor with integrated graphics
XII Quick Start
Power On/ Einschalten/ Mettre sous-tension/ / / / /
1
2
3
4 Quick Start XIII
Contents
Safety Information……………………………………………………………………………………. 3
Specifications…………………………………………………………………………………………… 4
Package contents …………………………………………………………………………………… 10
Rear I/O Panel ……………………………………………………………………………………….. 11 LAN Port LED Status
Table ………………………………………………………………………. 11 Audio Ports Configuration
………………………………………………………………………… 11 Realtek Audio Console
…………………………………………………………………………….. 12
Overview of Components ………………………………………………………………………… 15 Processor Socket
……………………………………………………………………………………. 16 DIMM
Slots……………………………………………………………………………………………… 17 PCI_E1~4: PCIe Expansion
Slots……………………………………………………………….. 18 SATA1~6: SATA 6Gb/s
Connectors…………………………………………………………….. 19 M2_1~2: M.2 Slots (Key M)
……………………………………………………………………….. 19 JFP1, JFP2: Front Panel
Connectors…………………………………………………………. 21 JAUD1: Front Audio Connector
…………………………………………………………………. 21 CPU_PWR1, ATX_PWR1: Power
Connectors………………………………………………. 22 JUSB4: USB 3.2 Gen 1 5Gbps Type-C
Connector…………………………………………. 23 JUSB3: USB 3.2 Gen 1 5Gbps Connector
……………………………………………………. 23 JUSB1~2: USB 2.0
Connectors………………………………………………………………….. 24 JTPM1: TPM Module
Connector………………………………………………………………… 24 CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan
Connectors……………………………. 25 JCI1: Chassis Intrusion
Connector…………………………………………………………….. 26 JBAT1: Clear CMOS (Reset BIOS)
Jumper………………………………………………….. 27 JRGB1~2: RGB LED connectors
………………………………………………………………… 28 JRAINBOW1~2: Addressable RGB LED connectors
…………………………………….. 29 EZ Debug LED…………………………………………………………………………………………. 30
LED_SW1: EZ LED Control ……………………………………………………………………….. 30
Installing OS, Drivers & Utilities ………………………………………………………………. 31 Installing
Windows® 10…………………………………………………………………………….. 31 Installing Drivers
…………………………………………………………………………………….. 31 Installing Utilities
……………………………………………………………………………………. 31
UEFI BIOS………………………………………………………………………………………………. 32 BIOS
Setup……………………………………………………………………………………………… 33 Entering BIOS
Setup………………………………………………………………………………… 33 Resetting
BIOS………………………………………………………………………………………… 34 Updating
BIOS…………………………………………………………………………………………. 34 EZ Mode
…………………………………………………………………………………………………. 36
Contents 1
Advanced Mode ………………………………………………………………………………………. 39 OC
Menu…………………………………………………………………………………………………. 40
2 Contents
Safety Information
The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure
successful computer assembly. Ensure that all components are securely
connected. Loose connections may cause the computer to not recognize a
component or fail to start. Hold the motherboard by the edges to avoid
touching sensitive components. It is recommended to wear an electrostatic
discharge (ESD) wrist strap when handling the motherboard to prevent
electrostatic damage. If an ESD wrist strap is not available, discharge
yourself of static electricity by touching another metal object before
handling the motherboard. Store the motherboard in an electrostatic shielding
container or on an anti-static pad whenever the motherboard is not installed.
Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case. Do not
boot the computer before installation is completed. This could cause permanent
damage to the components as well as injury to the user. If you need help
during any installation step, please consult a certified computer technician.
Always turn off the power supply and unplug the power cord from the power
outlet before installing or removing any computer component. Keep this user
guide for future reference. Keep this motherboard away from humidity. Make
sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet. Place the power
cord such a way that people can not step on it. Do not place anything over the
power cord. All cautions and warnings on the motherboard should be noted. If
any of the following situations arises, get the motherboard checked by service
personnel:
Liquid has penetrated into the computer. The motherboard has been exposed to
moisture. The motherboard does not work well or you can not get it work
according to user guide. The motherboard has been dropped and damaged. The
motherboard has obvious sign of breakage. Do not leave this motherboard in an
environment above 60°C (140°F), it may damage the motherboard.
Safety Information 3
Specifications
CPU Chipset
Memory
Expansion Slot Multi-GPU Onboard Graphics
Supports AMD RyzenTM 5000 Series, 5000 G-Series, 4000 G-Series, and 3000
Series processors Supports Socket AM4
AMD B550 Chipset
4x DDR4 memory slots, support up to 128GB* Supports DDR4 1866/ 2133/ 2400/
2667/ 2800/ 2933/ 3000/ 3066/ 3200 MHz by JEDEC Supports DDR4 2667/ 2800 /2933
/3000 /3066 /3200 /3466 /3600/ 3733 /3866 /4000 /4133 /4266 /4400 /4533 /4600
/4733/ 4800/ 4866+ MHz by A-XMP OC MODE 1DPC 1R max speed 4866 MHz 1DPC 2R max
speed 3866 MHz 2DPC 1R max speed 4000 MHz 2DPC 2R max speed 3600 MHz
Dual channel memory architecture Supports non-ECC UDIMM memory Supports ECC
UDIMM memory (non-ECC mode) Supports un-buffered memory
- Please refer www.msi.com for more information on compatible memory.
1x PCIe 4.0/ 3.0 x16 slot (PCI_E1)* 1x PCIe 3.0 x16 slot (PCI_E3), supports x4 speed** 2x PCIe 3.0 x1 slots - The supported specification depends on installed processor. * When installing devices in M.2_2, PCI_E2 & PCI_E3 slots at the same time, PCI_E3 slot will be unavailable, and M2_2 slot only supports PCIe x2. Please refer to page 18 for details.
Supports 2-Way AMD CrossFireTM Technology
1x HDMI 2.1 port, supports a maximum resolution of 4096×2160 @60Hz 1x DisplayPort, supports a maximum resolution of 4096×2160 @60Hz* Maximum shared memory of 16 GB - Available for the processor with integrated graphics. ** Graphics specifications may vary depending on the CPU installed.
Continued on next page
4 Specifications
Storage
RAID USB Audio LAN
Continued from previous page
AMD B550 Chipset 6x SATA 6Gb/s ports 2x M.2 slots (Key M)
M2_1 slot (from AMD Processor) Supports PCIe 4.0/ 3.0 x4* Supports SATA 6Gb/s
Supports 2242/ 2260/ 2280/ 22110 storage devices
M2_2 slot (from AMD B550 chipset) Supports PCIe 3.0×4 Supports 2242/ 2260/
2280 storage devices
- The supported specification depends on installed processor.
Supports RAID 0, RAID 1 and RAID 10 for SATA storage devices Supports RAID 0 and RAID 1 for M.2 NVMe storage devices
AMD B550 Chipset 3x USB 3.2 Gen 1 5Gbps ports (1 Type-C internal connector, and 2 ports are available through the internal USB 3.2 Gen 1 5Gbps connector) 6x USB 2.0 ports (2 Type-A ports on the back panel, 4 ports through the internal USB 2.0 connectors)
AMD Processor 2x USB 3.2 Gen 2 10Gbps ports (1 Type-C port and 1 Type-A port on the back panel) 2x USB 3.2 Gen 1 5Gbps Type-A ports on the back panel
Realtek® ALC897 Codec 7.1-Channel High Definition Audio Supports S/PDIF output
1x Realtek® RTL8125B 2.5Gbps LAN controller
Continued on next page
Specifications 5
Continued from previous page
Wireless LAN & Bluetooth®
AMD® Wi-Fi 6E* The Wireless module is pre-installed in the M.2 (Key-E) slot Supports MU-MIMO TX/RX Supports 20MHz, 40MHz, 80MHz bandwidth in 2.4GHz/ 5GHz or 6GHz bands Supports 802.11 a/ b/ g/ n/ ac/ ax Supports Bluetooth® 5.2**
- Wi-Fi 6E 6GHz may depend on every country’s regulations and will be ready in Windows 10 version 21H1 and Windows 11. ** Bluetooth 5.2 will be ready in Windows 10 version 21H1 and Windows 11.
1x 24-pin ATX main power connector 1x 8-pin ATX 12V power connector 6x SATA 6Gb/s connectors 2x M.2 slots (M-Key) 1x USB 3.2 Gen 1 5Gbps Type-C port 1x USB 3.2 Gen 1 5Gbps connector (supports additional 2 USB 3.2 Gen 1 5Gbps ports) 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports) Internal Connectors 1x 4-pin CPU fan connector 1x 4-pin water-pump fan connector 6x 4-pin system fan connectors 1x Front panel audio connector 2x System panel connectors 1x Chassis Intrusion connector 2x 4-pin RGB LED connectors 2x 3-pin RAINBOW LED connectors 1x TPM module connector 1x Clear CMOS jumper
LED Features
1x EZ LED Control switch 4x EZ Debug LED
Continued on next page
6 Specifications
Continued from previous page
Back Panel Connectors
I/O Controller Hardware Monitor Form Factor BIOS Features
Software
1x Flash BIOS Button 1x PS/2 keyboard/ mouse combo port 2x USB 2.0 Type-A
ports 1x Display port 1x HDMI port 1x LAN (RJ45) port 2x USB 3.2 Gen 1 5Gbps
Type-A ports 1x USB 3.2 Gen 2 10Gbps Type-A port 1x USB 3.2 Gen 2 10Gbps
Type-C port 2x Wi-Fi Antenna connectors 5x OFC audio jacks 1x Optical S/PDIF
Out connector
NUVOTON NCT6687-R Controller Chip
CPU/ System/ Chipset temperature detection CPU/ System/ Pump fan speed
detection CPU/ System/ Pump fan speed control
ATX Form Factor 12 in. x 9.6 in. (30.5 cm x 24.4 cm)
1x 256 Mb flash UEFI AMI BIOS ACPI 6.0, SMBIOS 2.8 Multi-language
Drivers MSI CENTER MSI APP Player (BlueStacks) Open Broadcaster Software (OBS)
CPU-Z MSI GAMING Google ChromeTM, Google Toolbar, Google Drive NortonTM
Internet Security Solution
Continued on next page
Specifications 7
MSI Center Features Special Features
8 Specifications
Continued from previous page
Gaming Mode Smart Priority Game Highlights LAN Manager Mystic Light Ambient
Devices Frozr AI Cooling User Scenario True Color Live Update Hardware
Monitoring Super Charger Devices Speed Up Smart Image Finder MSI Companion
System Diagnosis
Audio Audio Boost
Network 2.5G LAN LAN Manager with Realtek 8125B AMD WiFi
Cooling Extended Heatsink Design M.2 Shield Frozr Pump Fan Smart Fan Control
LED Mystic Light Extension (RAINBOW/RGB) Mystic Light SYNC Ambient Link EZ LED
Control EZ DEBUG LED
Continued on next page
Special Features
Continued from previous page
Performance Multi GPU-CrossFire Technology DDR4 Boost Core Boost GAME Boost
USB 3.2 Gen 2 10G USB with Type A+C Front USB Type-C
Protection PCI-E Steel Armor PCI-E Steel Slot Pre-installed I/O Shielding
Experience MSI Center Click BIOS 5 Flash BIOS Button
Specifications 9
Package contents
Please check the contents of your motherboard package. It should contain:
Motherboard Cable
Accessories
Application Documentation
MAG B550 TOMAHAWK MAX WIFI
SATA 6G cables (2 cables/pack)
1
Wi-Fi antenna
1
M.2 screws (3 pcs./pack)
1
MAG Sticker
1
Case badge
1
Product registration card
1
Driver DVD
1
Quick installation guide
1
MSI components compatibility & reward program card
1
Important
If any of the above items are damaged or missing, please contact your
retailer.
10 Package contents
Rear I/O Panel
PS/2 Combo port
Flash BIOS Button
2.5 Gbps LAN
DisplayPort
USB 3.2 Gen 2 (10Gbps) Type-A
Audio Ports
Flash BIOS Port
USB 2.0 Type-A
USB 3.2 Gen 1 (5Gbps) Type-A
Wi-Fi Antenna connectors
USB 3.2 Gen 2 (10Gbps) Type-C
Optical S/PDIF-Out
Flash BIOS Port/ Button – Please refer to page 35 for Updating BIOS with Flash BIOS Button.
LAN Port LED Status Table
Link/ Activity LED
Status Off Yellow Blinking
Description No link Linked Data activity
Speed LED
Status Off Green Orange
2.5 Gbps LAN 10 Mbps 100/ 1000 Mbps 2.5 Gbps
Audio Ports Configuration
Audio Ports
Channel
2468
Center/ Sub-woofer Out Rear Speaker Out
Line-In/ Side Speaker Out
Line-Out/ Front Speaker Out Mic In
(: connected, Blank: empty)
Rear I/O Panel 11
Realtek Audio Console
After Realtek Audio Console is installed. You can use it to change sound
settings to get better sound experience.
Application Enhancement
Device Selection
Main Volume
Connector Settings Jack Status
Device Selection – allows you to select a audio output source to change the
related options. The check sign indicates the devices as default. Application
Enhancement – the array of options will provide you a complete guidance of
anticipated sound effect for both output and input device. Main Volume –
controls the volume or balance the right/left side of the speakers that you
plugged in front or rear panel by adjust the bar. Jack Status – depicts all
render and capture devices currently connected with your computer. Connector
Settings – configures the connection settings.
Auto popup dialog When you plug into a device at an audio jack, a dialogue
window will pop up asking you which device is current connected.
Each jack corresponds to its default setting as shown on the next page.
Important
The pictures above for reference only and may vary from the product you
purchased.
12 Rear I/O Panel
Audio jacks to headphone and microphone diagram
Audio jacks to stereo speakers diagram
AUDIO INPUT
Audio jacks to 7.1-channel speakers diagram
AUDIO INPUT Rear Front Side Center/
Subwoofer
Rear I/O Panel 13
Installing antennas 1. Screw the antennas tight to the antenna connectors as
shown below. 2. Orient the antennas.
1
2
14 Rear I/O Panel
Overview of Components
CPU_PWR1
Processor Socket
CPU_FAN1 PUMP_FAN1 JRAINBOW2
SYS_FAN1 SYS_FAN2
JTPM1
SYS_FAN6 M2_1
PCI_E1
JBAT1 PCI_E2 PCI_E3
M2_2 PCI_E4
JAUD1
JRGB1
SYS_FAN5 JCI1
JUSB2
LED_SW1 JUSB1
SYS_FAN4
JFP1 JFP2 JUSB3
ATX_PWR1
JUSB4 DIMMB2 DIMMB1 DIMMA2 DIMMA1
SATA56
SATA12 SATA34 SYS_FAN3 JRGB2 JRAINBOW1 JPWRLED1
Overview of Components 15
Processor Socket
Distance from the center of the CPU to the nearest DIMM slot.
53.8 mm
Introduction to the AM4 CPU The surface of the AM4 CPU has a yellow triangle
to assist in correctly lining up the CPU for motherboard placement. The yellow
triangle is the Pin 1 indicator.
Important
When changing the processor, the system configuration could be cleared and
reset BIOS to default values, due to the AM4 processor’s architecture. Always
unplug the power cord from the power outlet before installing or removing the
CPU. When installing a CPU, always remember to install a CPU heatsink. A CPU
heatsink is necessary to prevent overheating and maintain system stability.
Confirm that the CPU heatsink has formed a tight seal with the CPU before
booting your system. Overheating can seriously damage the CPU and motherboard.
Always make sure the cooling fans work properly to protect the CPU from
overheating. Be sure to apply an even layer of thermal paste (or thermal tape)
between the CPU and the heatsink to enhance heat dissipation. If you purchased
a separate CPU and heatsink/ cooler, Please refer to the documentation in the
heatsink/ cooler package for more details about installation. This motherboard
is designed to support overclocking. Before attempting to overclock, please
make sure that all other system components can tolerate overclocking. Any
attempt to operate beyond product specifications is not recommended. MSI® does
not guarantee the damages or risks caused by inadequate operation beyond
product specifications.
16 Overview of Components
DIMM Slots
DIMMA1
DIMMB1
Channel A
Channel B
DIMMA2
Memory module installation recommendation
DIMMB2
DIMMA2
DIMMA2 DIMMB2
DIMMA1 DIMMA2 DIMMB1 DIMMB2
Important
Always insert memory modules in the DIMMA2 slot first. Due to chipset resource
usage, the available capacity of memory will be a little less than the amount
of installed. Based on CPU specification, the Memory DIMM voltage below 1.35V
is suggested to protect the CPU. To ensure system stability for Dual channel
mode, memory modules must be of the same type, number and density. Some memory
modules may operate at a lower frequency than the marked value when
overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the
memory frequency if you want to operate the memory at the marked or at a
higher frequency. It is recommended to use a more efficient memory cooling
system for full DIMMs installation or overclocking. The stability and
compatibility of installed memory module depend on installed CPU and devices
when overclocking. Please refer www.msi.com for more information on compatible
memory.
Overview of Components 17
PCI_E1~4: PCIe Expansion Slots
PCI_E1: PCIe 3.0/ 4.0 x16 (CPU)
PCI_E2: PCIe 3.0 x1 (PCH) PCI_E3: PCIe 3.0 x4 (PCH)
PCI_E4: PCIe 3.0 x1 (PCH)
Important
If you install a large and heavy graphics card, you need to use a tool such as
MSI Gaming Series Graphics Card Bolster to support its weight to prevent
deformation of the slot. For a single PCIe x16 expansion card installation
with optimum performance, using the PCI_E1 slot is recommended. When adding or
removing expansion cards, always turn off the power supply and unplug the
power supply power cable from the power outlet. Read the expansion card’s
documentation to check for any necessary additional hardware or software
changes. When installing devices in M.2_2, PCI_E2 & PCI_E3 slots at the same
time, PCI_E3 slot will be unavailable, and M2_2 slot only supports PCIe x2.
M.2 slots and PCIe slots combination table
Slot
Combination
M2_1 (CPU) M2_2 (PCH) PCI_E1 (CPU) PCI_E2 (PCH) PCI_E3 (PCH) PCI_E4 (PCH)
PCIe x2
PCIe/SATA
PCIe x4
X
X
X
PCIe x2
X X PCIe x4
(SATA: M.2 SATA SSD, PCIe: M.2 PCIe SSD, X: no device, : available, : unavailable)
18 Overview of Components
SATA1~6: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to
one SATA device.
SATA6 SATA5 SATA2 SATA1 SATA4 SATA3
Important
Please do not fold the SATA cable at a 90-degree angle. Data loss may result
during transmission otherwise. SATA cables have identical plugs on either
sides of the cable. However, it is recommended that the flat connector be
connected to the motherboard for space saving purposes.
M2_1~2: M.2 Slots (Key M)
Video Demonstration
Watch the video to learn how to Install M.2 module.
M2_1
M2_2
Installing M.2 module 1. Loosen the screws of M.2 SHIELD FROZR heatsink. 2.
Remove the M.2 SHIELD FROZR and remove the protective films from the thermal
pads.
Overview of Components 19
1 2
1 1
1
3. Move and fasten the M.2 standoff to the appropriate position for your M.2
SSD, or remove the M.2 standoff if your M.2 SSD length is same as the length
of M.2 heatsink to avoid damage to the M.2 SSD.
4. Insert your M.2 SSD into the M.2 slot at a 30-degree angle. 5. Secure the
M.2 SSD in place with the M.2 screw, or skip this step if you remove the
M.2 standoff in step 3.
M.2 screw
5
M.2 standoff
3
4
30º
heatsink standoff 6. Put the M.2 SHIELD FROZR heatsink back in place and
secure it.
6
6 6
6
20 Overview of Components
JFP1, JFP2: Front Panel Connectors
These connectors connect to the switches and LEDs on the front panel.
Power LED Power Switch
–
-+
++
JFP1
2 1
–
10
9
Reserved
HDD LED Reset Switch
1
HDD LED +
2
3
HDD LED –
4
5
Reset Switch
6
7
Reset Switch
8
9
Reserved
10
Power LED + Power LED Power Switch Power Switch
No Pin
JFP2 1
- +-
Buzzer
1
Speaker –
2
Speaker 3
Buzzer –
4
Buzzer + Speaker +
JAUD1: Front Audio Connector
This connector allows you to connect audio jacks on the front panel.
2
10
1
9
1
MIC L
2
Ground
3
MIC R
4
NC
5
Head Phone R
6
MIC Detection
7
SENSE_SEND
8
No Pin
9
Head Phone L
10
Head Phone Detection
Overview of Components 21
CPU_PWR1, ATX_PWR1: Power Connectors
These connectors allow you to connect an ATX power supply.
8 4
5 1
CPU_PWR1
1
Ground
5
2
Ground
6
3
Ground
7
4
Ground
8
+12V +12V +12V +12V
1
+3.3V
13
2
+3.3V
14
3
Ground
15
12
24
4
+5V
16
5
Ground
17
6
+5V
18
ATX_PWR1
7
Ground
19
8
PWR OK
20
1
13
9
5VSB
21
10
+12V
22
11
+12V
23
12
+3.3V
24
+3.3V -12V Ground PS-ON# Ground Ground Ground Res +5V +5V +5V Ground
Important
Make sure that all the power cables are securely connected to a proper ATX
power supply to ensure stable operation of the motherboard.
22 Overview of Components
JUSB4: USB 3.2 Gen 1 5Gbps Type-C Connector
This connector allows you to connect USB 3.2 Gen 1 5Gbps Type-C connector on
the front panel. The connector possesses a foolproof design. When you connect
the cable, be sure to connect it with the corresponding orientation.
JUSB4
USB Type-C Cable USB Type-C port on the front panel
JUSB3: USB 3.2 Gen 1 5Gbps Connector
This connector allows you to connect USB 3.2 Gen 1 5Gbps ports on the front
panel.
1
10
20
11
1
Power
11
2
USB3_RX_DN
12
3
USB3_RX_DP
13
4
Ground
14
5
USB3_TX_C_DN
15
6
USB3_TX_C_DP
16
7
Ground
17
8
USB2.0-
18
9
USB2.0+
19
10
Ground
20
USB2.0+ USB2.0Ground USB3_TX_C_DP USB3_TX_C_DN Ground USB3_RX_DP USB3_RX_DN Power No Pin
Important
Note that the Power and Ground pins must be connected correctly to avoid
possible damage.
Overview of Components 23
JUSB1~2: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.
2
10
1
9
1
VCC
2
3
USB0-
4
5
USB0+
6
7
Ground
8
9
No Pin
10
VCC USB1USB1+ Ground
NC
Important
Note that the VCC and Ground pins must be connected correctly to avoid
possible damage. In order to recharge your iPad,iPhone and iPod through USB
ports, please install MSI® DRAGON CENTER utility.
JTPM1: TPM Module Connector
This connector is for TPM (Trusted Platform Module). Please refer to the TPM
security platform manual for more details and usages.
12
11
2
1
1
SPI Power
2
3 Master In Slave Out (SPI Data) 4
5
Reserved
6
7
Ground
8
9
Reserved
10
11
Reserved
12
SPI Chip Select Master In Slave In (SPI Data)
SPI Clock SPI Reset
No Pin Interrupt Request
24 Overview of Components
CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC
Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed
with speed control signal. DC Mode fan connectors control fan speed by
changing voltage. The auto mode fan connectors can automatically detect PWM
and DC mode. However, you can follow the instruction below to adjust the fan
connector to PWM or DC Mode manually.
SYS_FAN6 CPU_FAN1 PUMP_FAN1 SYS_FAN1 SYS_FAN2
Connector
CPU_FAN1 PUMP_FAN1 SYS_FAN1~6
Default fan mode
Auto mode PWM mode DC mode
Max. current
2A 3A 1A
Max. power
24W 36W 12W
SYS_FAN3
SYS_FAN5 SYS_FAN4
Switching fan mode and adjusting fan speed You can switch between PWM mode and
DC mode and adjust fan speed in BIOS > HARDWARE MONITOR.
Select PWM mode or DC mode
There are gradient points of the fan speed that allow you to adjust fan speed
in relation to CPU temperature.
Important
Make sure fans are working properly after switching the PWM/ DC mode.
Pin definition of fan connectors
1
PWM Mode pin definition
1
Ground
2
+12V
3
Sense
4
Speed Control Signal
1 DC Mode pin definition
1
Ground
2
Voltage Control
3
Sense
4
NC
Overview of Components 25
JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable.
Normal (default)
Trigger the chassis intrusion event
Using chassis intrusion detector 1. Connect the JCI1 connector to the chassis
intrusion switch/ sensor on the chassis. 2. Close the chassis cover. 3. Go to
BIOS > SETTINGS > Security > Chassis Intrusion Configuration. 4. Set Chassis
Intrusion to Enabled. 5. Press F10 to save and exit and then press the Enter
key to select Yes. 6. Once the chassis cover is opened again, a warning
message will be displayed on
screen when the computer is turned on.
Resetting the chassis intrusion warning 1. Go to BIOS > SETTINGS > Security >
Chassis Intrusion Configuration. 2. Set Chassis Intrusion to Reset. 3. Press
F10 to save and exit and then press the Enter key to select Yes.
26 Overview of Components
JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located
on the motherboard to save system configuration data. If you want to clear the
system configuration, set the jumpers to clear the CMOS memory.
Keep Data (default)
Clear CMOS/ Reset BIOS
Resetting BIOS to default values 1. Power off the computer and unplug the power cord. 2. Use a jumper cap to short JBAT1 for about 5-10 seconds. 3. Remove the jumper cap from JBAT1. 4. Plug the power cord and Power on the computer.
Overview of Components 27
JRGB1~2: RGB LED connectors
These JRGB connectors allow you to connect the 5050 RGB LED strips 12V.
1
1
+12V
2
G
3
R
4
B
RGB LED Strip Connection
1
GR B
JRGB connector
RGB extension cable
RGB LED Fan Connection
JRGB connector
1
5050 RGB LED strips 12V
GR B
1
System Fan connector
RGB LED Fan
Important
The JRGB connector supports up to 2 meters continuous 5050 RGB LED strips
(12V/G/R/B) with the maximum power rating of 3A (12V). Always turn off the
power supply and unplug the power cord from the power outlet before installing
or removing the RGB LED strip. Please use MSI’s software to control the
extended LED strip.
28 Overview of Components
JRAINBOW1~2: Addressable RGB LED connectors
The JRAINBOW connectors allow you to connect the WS2812B Individually
Addressable RGB LED strips 5V.
1
1
+5V
2
Data
3
No Pin
4
Ground
Addressable RGB LED Strip Connection
1
+5V
D
JRAINBOW connector
Rainbow RGB LED extension cable
Addressable RGB LED Fan Connection
JRAINBOW connector
1
WS2812B Individually Addressable RGB LED strips 5V
1
System Fan connector
Addressable RGB LED Fan
CAUTION
Do not connect the wrong type of LED strips. The JRGB connector and the
JRAINBOW connector provide different voltages, and connecting the 5V LED strip
to the JRGB connector will result in damage to the LED strip.
Important
The JRAINBOW connector supports up to 75 LEDs WS2812B Individually Addressable
RGB LED strips (5V/Data/Ground) with the maximum power rating of 3A (5V). In
the case of 20% brightness, the connector supports up to 200 LEDs. Always turn
off the power supply and unplug the power cord from the power outlet before
installing or removing the RGB LED strip. Please use MSI’s software to control
the extended LED strip.
Overview of Components 29
EZ Debug LED
These LEDs indicate the debug status of the motherboard.
CPU – indicates CPU is not detected or fail. DRAM – indicates DRAM is not
detected or fail. VGA – indicates GPU/ PCIE/ M.2 device is not detected
or fail. BOOT – indicates the booting device is not detected
or fail.
LED_SW1: EZ LED Control
This switch is used to switch on/ off all the LEDs of motherboard.
LED_OFF
LED_ON (Default)
30 Overview of Components
Installing OS, Drivers & MSI Center
Please download and update the latest utilities and drivers at www.msi.com
Installing Windows 10/ Windows 11
1. Power on the computer. 2. Insert the Windows 10/ Windows 11 installation
disc/ USB into your computer. 3. Press the Restart button on the computer
case. 4. Press F11 key during the computer POST (Power-On Self Test) to get
into Boot
Menu. 5. Select the Windows 10/ Windows 11 installation disc/USB from the Boot
Menu. 6. Press any key if screen shows Press any key to boot from CD or DVD…
message.
If not please skip this step. 7. Follow the instructions on the screen to
install Windows 10/ Windows 11.
Installing Drivers
1. Start up your computer in Windows 10/ Windows 11. 2. Insert MSI® DVD Drive
disc into your optical drive. 3. Click the Select to choose what happens with
this disc pop-up notification, then
select Run DVDSetup.exe to open the installer. If you turn off the AutoPlay
feature from the Windows Control Panel, you can still manually execute the
DVDSetup.exe from the root path of the MSI USB Drive. 4. The installer will
find and list all necessary drivers in the Drivers/Software tab. 5. Click the
Install button in the lower-right corner of the window. 6. The drivers
installation will then be in progress, after it has finished it will prompt
you to restart. 7. Click OK button to finish. 8. Restart your computer.
MSI Center
MSI Center is an application that helps you easily optimize game settings and
smoothly use content creation softwares. It also allows you to control and
synchronize LED light effects on PCs and other MSI products. With MSI Center,
you can customize ideal modes, monitor system performance, and adjust fan
speed.
MSI Center User Guide If you would like to know more information about MSI
Center, please refer to http://download.msi.com/manual/mb/MSICENTER.pdf or
scan the QR code to access.
Important
Functions may vary depending on the product you have.
Installing OS, Drivers & MSI Center 31
UEFI BIOS
MSI UEFI BIOS is compatible with UEFI (Unified Extensible Firmware Interface)
architecture. UEFI has many new functions and advantages that traditional BIOS
cannot achieve, and it will completely replace BIOS in the future. The MSI
UEFI BIOS uses UEFI as the default boot mode to take full advantage of the new
chipset’s capabilities.
Important
The term BIOS in this user guide refers to UEFI BIOS unless otherwise noted.
UEFI advantages Fast booting – UEFI can directly boot the operating system and
save the BIOS selftest process. And also eliminates the time to switch to CSM
mode during POST. Supports for hard drive partitions larger than 2 TB.
Supports more than 4 primary partitions with a GUID Partition Table (GPT).
Supports unlimited number of partitions. Supports full capabilities of new
devices – new devices may not provide backward compatibility. Supports secure
startup – UEFI can check the validity of the operating system to ensure that
no malware tampers with the startup process. Incompatible UEFI cases 32-bit
Windows operating system – this motherboard supports only Windows 10 64-bit
operating system. Older graphics card – the system will detect your graphics
card. When display a warning message There is no GOP (Graphics Output
protocol) support detected in this graphics card.
Important
We recommend that you to replace with a GOP/UEFI compatible graphics card or
using integrated graphics from CPU for having normal function. How to check
the BIOS mode? 1. Power on your computer. 2. Press Delete key, when the Press
DEL key to enter Setup Menu, F11 to enter
Boot Menu message appears on the screen during the boot process. 3. After
entering the BIOS, you can check the BIOS Mode at the top of the screen.
BIOS Mode: UEFI
32 UEFI BIOS
BIOS Setup
The default settings offer the optimal performance for system stability in
normal conditions. You should always keep the default settings to avoid
possible system damage or failure booting unless you are familiar with BIOS.
Important
BIOS items are continuously update for better system performance. Therefore,
the description may be slightly different from the latest BIOS and should be
for reference only. You could also refer to the HELP information panel for
BIOS item description. The pictures in this guide are for reference only . The
BIOS screens, options and settings will vary depending on your system.
Entering BIOS Setup
Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter
Boot Menu message appears on the screen during the boot process. Function key
F1: General Help list F2: Add/ Remove a favorite item F3: Enter Favorites menu
F4: Enter CPU Specifications menu F5: Enter Memory-Z menu F6: Load optimized
defaults F7: Switch between Advanced mode and EZ mode F8: Load Overclocking
Profile F9: Save Overclocking Profile F10: Save Change and Reset F12: Take a
screenshot and save it to USB flash drive (FAT/ FAT32 format only). Ctrl+F:
Enter Search page When you press F10, a confirmation window appears and it
provides the modification information. Select between Yes or No to confirm
your choice.
BIOS User Guide
If you’d like to know more instructions on setting up the BIOS, please refer
to http:// download.msi.com/manual/mb/AMDX570BIOS.pdf or scan the QR code to
access.
BIOS Setup 33
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems.
There are several ways to reset BIOS: Go to BIOS and press F6 to load
optimized defaults. Short the Clear CMOS jumper on the motherboard. Press the
Clear CMOS button on the rear I/O panel. (optional)
Important
Be sure the computer is off before clearing CMOS data. Please refer to the
Clear CMOS section for resetting BIOS.
Updating BIOS
Updating BIOS with M-FLASH Before updating: Please download the latest BIOS
file that matches your motherboard model from MSI website. And then save the
BIOS file into the USB flash drive. Updating BIOS: 1. Insert the USB flash
drive that contains the update file into the USB port. 2. Please refer the
following methods to enter flash mode.
Reboot and press Ctrl + F5 key during POST and click on Yes to reboot the
system.
Press <Ctrl+F5> to activate M-Flash for BIOS update. Reboot and press Del key
during POST to enter BIOS. Click the M-FLASH button and click on Yes to reboot
the system.
3. Select a BIOS file to perform the BIOS update process. 4. When prompted
click on Yes to start recovering BIOS. 5. After the flashing process is 100%
completed, the system will reboot
automatically.
34 BIOS Setup
Updating the BIOS with MSI Center Before updating: Make sure the LAN driver is
already installed and the internet connection is set properly. Please close
all other application software before updating the BIOS. To update BIOS: 1.
Install and launch MSI Center and go to Support page. 2. Select Live Update
and click on Advance button. 3. Select the BIOS file and click on Install
button. 4. The installation reminder will appear, then click the Install
button on it. 5. The system will automatically restart to update BIOS. 6.
After the flashing process is 100% completed, the system will restart
automatically. Updating BIOS with Flash BIOS Button 1. Please download the
latest BIOS file that matches your motherboard model from
the MSI® website. 2. Rename the BIOS file to MSI.ROM, and save it to the root
of the USB storage
device. 3. Connect the power supply to CPU_PWR1 and ATX_PWR1. (No need to
install CPU
and memory.) 4. Plug the USB storage device that contains the MSI.ROM file
into the Flash BIOS
Port on the rear I/O panel. 5. Press the Flash BIOS Button to flash BIOS, and
the LED starts flashing. 6. The LED will be turned off when the process is
completed.
BIOS Setup 35
Regulatory Notices
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and radiates radio
frequency energy, and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected.
NOTE The changes or modifications not expressly approved by the party
responsible for
compliance could void the user’s authority to operate the equipment. Shield
interface cables and AC power cord, if any, must be used in order to comply
with the emission limits.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference.
This device must accept any interference received, including interference that
may
cause undesired operation.
MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA
(626)913-0828 www.msi.com
Regulatory Notices i
CE Conformity
Products bearing the CE marking comply with one or more of the following EU
Directives as may be applicable: RED 2014/53/EU Low Voltage Directive
2014/35/EU EMC Directive 2014/30/EU RoHS Directive 2011/65/EU ErP Directive
2009/125/EC Compliance with these directives is assessed using applicable
European Harmonized Standards. The point of contact for regulatory matters is
MSI, MSI-NL Eindhoven 5706 5692 ER Son.
Products with Radio Functionality (EMF)
This product incorporates a radio transmitting and receiving device. For
computers in normal use, a separation distance of 20 cm ensures that radio
frequency exposure levels comply with EU requirements. Products designed to be
operated at closer proximities, such as tablet computers, comply with
applicable EU requirements in typical operating positions. Products can be
operated without maintaining a separation distance unless otherwise indicated
in instructions specific to the product.
Restrictions for Products with Radio Functionality
CAUTION: IEEE 802.11x wireless LAN with 5.15~5.35 GHz frequency band is
restricted for indoor use only in all European Union member states, EFTA
(Iceland, Norway, Liechtenstein), and most other European countries (e.g.,
Switzerland, Turkey, Republic of Serbia). Using this WLAN application outdoors
might lead to interference issues with existing radio services.
Radio frequency bands and maximum power levels Features: Wi-Fi 6E, BT
Frequency Range:
2412~2484MHz 5150~5350MHz (RLAN 1) 5470~5725MHz (RLAN 2) 5725~5875MHz (RLAN 3)
5875~5925MHz (RLAN 4) 5925~6425MHz Max Power Level: 2.4 GHz: 20dBm; 5 GHz:
23dBm; 6 GHz: 23dBm
ii Regulatory Notices
Wireless Radio Use
This device is restricted to indoor use when operating in the 2.4GHz, 5GHz,
6GHz frequency band. Cet appareil doit être utilisé à l’intérieur.
.
2.4GHz, 5GHz, 6GHz
NCC
2.4GHz, 5GHz, 6GHz
Compliance Statement of Innovation, Science and Economic Development Canada
(ISED)
This device complies with with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.
Operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
CAN ICES-003(B)/NMB-003(B)
Australia and New Zealand notice
This equipment incorporates a radio transmitting and receiving device. In
normal use, a separation distance of 20 cm ensures that radio frequency
exposure levels comply with the Australian and New Zealand Standards.
B
VCCI-B
KC
R-R-MSI-11-7C91
: () : : 11-7C91 : 2022 : MSI/
Regulatory Notices iii
Battery Information
European Union: Batteries, battery packs, and accumulators should not be
disposed of as unsorted household waste. Please use the public collection
system to return, recycle, or treat them in compliance with the local
regulations.
Taiwan:
For better environmental protection, waste batteries should be collected
separately for recycling or special disposal.
California, USA: The button cell battery may contain perchlorate material and
requires special handling when recycled or disposed of in California. For
further information please visit:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
CAUTION: There is a risk of explosion, if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
https://storage-asset.msi.com/html/popup/csr/evmtprtt_pcm.html
Environmental Policy
The product has been designed to enable proper reuse of parts and recycling
and should not be thrown away at its end of life.
Users should contact the local authorized point of collection for recycling
and disposing of their end-of-life products.
Visit the MSI website and locate a nearby distributor for further recycling
information.
Users may also reach us at gpcontdev@msi.com for information regarding proper
Disposal, Take-back, Recycling, and Disassembly of MSI products.
WEEE (Waste Electrical and Electronic Equipment) Statement
ENGLISH To protect the global environment and as an environmentalist, MSI must
remind you that… Under the European Union (“EU”) Directive on Waste Electrical
and Electronic Equipment, Directive 2002/96/EC, which takes effect on August
13, 2005, products of “electrical and electronic equipment” cannot be
iv Regulatory Notices
discarded as municipal wastes anymore, and manufacturers of covered electronic
equipment will be obligated to take back such products at the end of their
useful life. MSI will comply with the product take back requirements at the
end of life of MSIbranded products that are sold into the EU. You can return
these products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen
Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt
werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen
beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am
Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt
zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle
in Ihrer Nähe.
FRANÇAIS
En tant qu’écologiste et afin de protéger l’environnement, MSI tient à
rappeler ceci…
Au sujet de la directive européenne (EU) relative aux déchets des équipement
électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août
2005, que les produits électriques et électroniques ne peuvent être déposés
dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces
équipements seront obligés de récupérer certains produits en fin de vie. MSI
prendra en compte cette exigence relative au retour des produits en fin de vie
au sein de la communauté européenne. Par conséquent vous pouvez retourner
localement ces matériels dans les points de collecte.
MSI , , ….
() ( WEEE 2002/96/EC), 13 2005 , , , , . MSI , MSI EC, . .
ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente,
recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o
equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los
productos clasificados como “eléctricos y equipos electrónicos” no pueden ser
depositados en los contenedores habituales de su municipio, los fabricantes de
equipos electrónicos, están obligados a hacerse cargo de dichos productos al
termino de su período de vida. MSI estará comprometido con los términos de
recogida de sus productos vendidos en
Regulatory Notices v
la Unión Europea al final de su periodo de vida. Usted debe depositar estos
productos en el punto limpio establecido por el ayuntamiento de su localidad o
entregar a una empresa autorizada para la recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van
Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005
in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van
dit soort producten worden verplicht om producten retour te nemen aan het eind
van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de
producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen
kunnen geretourneerd worden op lokale inzamelingspunten.
SRPSKI
Da bi zastitili prirodnu sredinu, i kao preduzee koje vodi racuna o okolini i
prirodnoj sredini, MSI mora da vas podesti da… Po Direktivi Evropske unije
(“EU”) o odbacenoj ekektronskoj i elektricnoj opremi, Direktiva 2002/96/EC,
koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod
“elektronsku i elektricnu opremu” ne mogu vise biti odbaceni kao obican otpad
i proizvoaci ove opreme bie prinueni da uzmu natrag ove proizvode na kraju
njihovog uobicajenog veka trajanja. MSI e postovati zahtev o preuzimanju
ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji
su prodati u EU. Ove proizvode mozete vratiti na lokalnim mestima za
prikupljanje.
POLSKI
Aby chroni nasze rodowisko naturalne oraz jako firma dbajca o ekologi, MSI
przypomina, e…Zgodnie z Dyrektyw Unii Europejskiej (“UE”) dotyczc odpadów
produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która
wchodzi w ycie 13 sierpnia 2005, tzw. “produkty oraz wyposaenie elektryczne i
elektroniczne ” nie mog by traktowane jako mieci komunalne, tak wic producenci
tych produktów bd zobowizani do odbierania ich w momencie gdy produkt jest
wycofywany z uycia. MSI wypelni wymagania UE, przyjmujc produkty (sprzedawane
na terenie Unii Europejskiej) wycofywane z uycia. Produkty MSI bdzie mona
zwraca w wyznaczonych punktach zbiorczych.
TÜRKÇE
Çevreci özelliiyle bilinen MSI dünyada çevreyi korumak için hatirlatir: Avrupa
Birlii (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atii, 2002/96/ EC
Kararnamesi altinda 13 Austos 2005 tarihinden itibaren geçerli olmak üzere,
elektrikli ve elektronik malzemeler dier atiklar gibi çöpe atilamayacak ve bu
elektonik cihazlarin üreticileri, cihazlarin kullanim süreleri bittikten sonra
ürünleri geri toplamakla yükümlü olacaktir. Avrupa Birlii’ne satilan MSI
markali ürünlerin kullanim süreleri bittiinde MSI ürünlerin geri alinmasi
istei ile ibirlii içerisinde olacaktir. Ürünlerinizi yerel toplama noktalarina
birakabilirsiniz.
CESKY
Zálezí nám na ochran zivotního prostedí – spolecnost MSI upozoruje…
Podle smrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických
výrobk 2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické
a elektronické
vi Regulatory Notices
výrobky” v bzném komunálním odpadu a výrobci elektronických výrobk, na které
se tato smrnice vztahuje, budou povinni odebírat takové výrobky zpt po
skoncení jejich zivotnosti. Spolecnost MSI splní pozadavky na odebírání výrobk
znacky MSI, prodávaných v zemích EU, po skoncení jejich zivotnosti. Tyto
výrobky mzete odevzdat v místních sbrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédként
fellépve az MSI emlékezteti Önt, hogy …
Az Európai Unió (,,EU”) 2005. augusztus 13-án hatályba lép, az elektromos és
elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az
elektromos és elektronikus berendezések többé nem kezelhetek lakossági
hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak
az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI
betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév
alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén.
Az ilyen termékeket a legközelebbi gyjthelyre viheti.
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei
Materiali Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13
Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed
Elettronici non possono più essere eliminati come rifiuti municipali: i
produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla
fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i
prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea
alla fine del loro ciclo di vita. È possibile portare i prodotti nel più
vicino punto di raccolta
JIS C 0950
JIS C 0950200671
https://storage-asset.msi.com/html/popup/csr/cemm_jp.html
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule
2011″ and prohibits use of lead, mercury, hexavalent chromium, polybrominated
biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1
weight % and 0.01 weight % for cadmium, except for the exemptions set in
Schedule 2 of the Rule.
Türkiye EEE yönetmelii
Türkiye Cumhuriyeti: EEE Yönetmeliine Uygundur
, 3 2008 1057.
Regulatory Notices vii
Vit Nam RoHS
K t ngày 01/12/2012, tt c các sn phm do công ty MSI sn xut tuân th Thông t s
30/2011/TT-BCT quy nh tm thi v gii hn hàm lng cho phép ca mt s hóa cht c hi có
trong các sn phm in, in t”
MS-7C91
(Pb) (Hg) (Cd) (Cr(VI)) (PBB)
(PBDE)
**
SJ/T 11364
: GB/T 26572
: GB/T 26572 RoHS
- :
**
()MS-7C91
(Pb) (Hg) (Cd) (Cr+6) (PBB)
(PBDE)
1. “0.1 wt %” “0.01 wt %”
2. “”
3. “”
viii Regulatory Notices
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used
is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and
names mentioned may be trademarks of their respective owners. No warranty as
to accuracy or completeness is expressed or implied. MSI reserves the right to
make changes to this document without prior notice.
Technical Support
If a problem arises with your system and no solution can be obtained from the
user guide, please contact your place of purchase or local distributor.
Alternatively, please try the following help resources for further guidance.
Visit the MSI website for technical guide, BIOS updates, driver updates, and
other
information: http://www.msi.com Register your product at:
http://register.msi.com
Revision History
Version 1.0, 2022/02, First release.
Regulatory Notices ix
References
- Welcome to MSI Member Account Login | MSI Member Center
- 优酷 - 为好内容全力以赴 - 海量正版高清视频在线观看
- 微星 如何安装前置面板接口(JFP1)
- v.youku.com/v_show/id_XNzUyMTI5ODI4.html
- dtsc.ca.gov/hazardouswaste/perchlorate/
- MSI - Redirect
- csr
- csr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>