Vastar VWO1-ALX-5 Watch Adjustable Opener Back Case User Guide
- June 9, 2024
- Vastar
Table of Contents
Vastar VWO1-ALX-5 Watch Adjustable Opener Back Case
Specification
- Brand Vastar
- Model VWO1-ALX-5
- Item Dimensions LxWxH 6.5 x 5 x 2 inches
- Tool Flute Type Straight
- Item Weight 4 ounces
- Measurement System Metric
What’s In the Box
- Vastar Watch Back Case Opener
- Vastar Watch Holder
Introduction
Vastar was founded in 1996 and has grown to become one of the top tool providers in more than 70 nations. We have been providing practical equipment to DIY enthusiasts and professional workers for decades, making chores easier for them to complete. Vastar, which combines excellent quality, distinctive design, and first-rate customer service, is of the opinion that useful tools make life better and simpler.
It is simple to access the watch’s rear
Simple Bolt Adjustment
Dimension
Expert Watch Back Removal Tool
The back cover of a watch can be simply removed using a high-quality Vastar watch back case opener and watch holder. Save both money and time.
Easy to Operate
Tempered adjustable pins make it simple to employ water-resistant casings. This watch back case opener is only appropriate for watches with rotating watch covers; it is not suitable for watches with other watch cover-opening mechanisms.
Watch Stand Vastar
The watch case holding tool will reduce the possibility of slipping and scratching thanks to its four sturdy, adjustable plastic pins.
Apply to Many Varieties of Watches
The Vastar Watch Adjustable Opener can be used for watches of many shapes and sizes, so you won’t need to worry about changing the battery. The watch rear case opener’s usable range is 15-60mm.
Enhanced Presentation
The ideal professional tool set for repairing watches, Note: The watch back base opener’s appearance has been updated. The case back screw-in tool. Please be sure to determine whether the watch’s rear cover is a screw type.
How to Use
-
Preparation
Before opening the watch, rotate the case holder’s four white components. Then, rotate the black button to reduce the height. -
Step 1
Attach the four white parts in accordance with the watch belt after inserting the watch’s backside into the yellow case holder. To fix the entire watch in place in accordance with the watch’s size, roll the black knob to adjust the yellow holder. -
Step 2
Adjust the bit spacing to change the watch’s rear shell width by rolling the silver adjustment wheel on the blue dial. -
Step 3
Try twisting the cover after putting the Watch Back Case Opener in place. The cover can be successfully opened.
Features
- Watch Back Case Opener for Vastar
- This new watch-back case wrench is watertight.
- It’s easy to use, completely adjustable, and has hardened pins that can be adjusted for use with water-resistant cases.
- It is really convenient to use due to its small size.
- Size: 70mm X 28mm X 11mm Jaw distance is adjustable from 12mm to 57mm Stainless steel
- the hue blue Watch Case Holder Vastar
- It is employed to hold watch casings in place as watertight backs are opened and closed.
- For holding large watches, such as Divers-style watches, while using a hand wrench to open the case back, use the large case holder.
- The device is meant to reduce the possibility of slipping and damaging the watch backs.
- The tool can also be used to hold the watch while it is being repaired.
- Four adjustable nylon pegs and a base are included with the item.
- The tool vise can be fixed to a workbench or desk. Unit can securely hold cases with a diameter of up to 70 mm.
FAQs
Does it work on all watches?****
Yes, it works on all watches.
Does it work with all watch brands?****
Yes, it works on all watch brands.
Is there a warranty?****
Yes, you can get a full refund if you are not satisfied with this product.
How do you fix a watch back cover?****
Take hold of the crystal with your fingers, then press down with your thumbs on the watch back until it clicks into place. Adjust your fingers and press down on the watch case where it is still lifted if one edge of the watch case is still raised after it has snapped.
What type of watch backs are there?****
The “snap back” type, the “screw” type, and watch cases, where the watch back plate is secured in place by tiny screws, are the three primary varieties of watch cases.
What is the open back on a watch called?****
Exhibition case backs, sometimes known as “open” case backs, are transparent covers that are placed on the backs of watch cases to display the movement’s internal workings. Frequency: The rate of a watch’s ticking (or beating), expressed in hertz or vibrations per hour.
How do you open a watch with a case opener?****
Holding the watch by the case, just press the opener onto the case back The watch case can then be turned back anticlockwise until it is loose by pressing the opener firmly against the back to get a better hold. These openers are fantastic options for novices because they won’t damage the case back.
Do watch backs unscrew?****
Simply turn the watch over, hold it by the watch strap with one hand, and place the friction ball against the case back with the other. When you apply pressure and turn the ball anticlockwise, the case back should come off rather easily if it is sufficiently loose.
How do you tell if a watch has a screw-back?****
Take a look at the watch’s back. Your watch has a screw-down case back if there are little indentations all over the case’s back. If there are no obvious indentations, the watch’s case back is probably removable with a snap.
What is a watch case opener used for?****
For opening watch backs, this tool is convenient and adaptable.
How do you clean a watch case?****
You can clean the watch case with a delicate, slightly wet cloth. To reach the corners of your watch, use a brush with soft bristles. After that, you can use a soft, dry cloth to dry the watch case.
How do you open a tight watch case?****
The socket should be filled with a little amount of acetone (nail varnish remover) and left for about a minute. Reattach the socket to the wrench and tap the case back with a rubber mallet or another something that will provide some force but not leave any marks. Pour the extra acetone back into the bottle cap.