MOBILE TO GO 6132515 Pro Plus MTG BT Neckband Earbuds User Manual
- June 9, 2024
- MOBILE TO GO
Table of Contents
MTG BT NECKBAND EARBUDS SLIM
Operation Manual
6132514.
Know Your Headphone
Product Specifications
Version: V5.3
Working Time: —70-120 hours
Working Distance: 10-20m(Barrier-free line)
Working Voltage: 3.1-4.2V Speaker: 14.2mm
Working Environment: —10-60°C
Battery Capacity:1000mAh
Charging lime: —2 hours
Charging Power: 5V-500mA
Frequency: 2402-2480MHz
Standby Time: —30days
LED Indicator Light
Power on: Blue light flashes.
Ready for Pairing: Red and blue lights flash alternately.
Charging: Power level indicators flash in sequence. The four battery
indicator lights represent the remaining percentage of the headset: One LED
0-25% Two LEDs 25-50% Three LEDs 50-75% Four LEDs 75-100%
Fully charged: The battery indicator lights are on. Power off: Red light
flashes 3 times
Bluetooth Pairing
- Press and hold the power key for 2 seconds to the power on. The Power indicator light will flash red and blue, indicating the headset is in pairing mode.
- Turn on the bluetooth mode of your mobile or other bluetooth device and select the pairing name “MTG BT Neckband Pro+”. After the connection is successful, there will be no more flashing lights. (Press the Power key and hold for about 3 seconds again to turn off the power.)
- The headset will turn off automatically within 5 minutes if no connection is found.
Conned two mobile phones at the same time
- Connect the headset with your first mobile phone according to the above guidance. Then turn off the bluetooth mode of your first mobile phone.
- Connect the headset with your second mobile phone according to the above guidance. Then turn on the bluetooth mode of your first mobile phone and select the pairing name “MTG BT Neckband Pro +”.
How to Use
Power on: Press and hold the Power key for 2 seconds.
Power off: Press and hold the Power key for 3 seconds.
Answer a call: Click the Multi-function key when call in.
Hang up the phone: Click the Multi-function key during the call.
Reject a call: Press and hold the Multi-function Key for 1 second when call
in.
Play/pause: Click the Multi-function key when you listen to the song.
Previous song: Press and hold the ” + ” key for 1 second when listening to
music. Next song: Press and hold the “-” key for 1 second when listening to
music.
Increase the volume: Click the “+” key when listening to music.
Decrease the volume: Click the “-” key when listening to music.
Redial last phone number: Double click the Multi-function key. Voice
assistant: Click the “C” key.
TF card/Bluetooth mode switch: Double click C key after TF card inserted.
Power level: Click the Power key to display the power level. Indicators will
be turned off after 5-20seconds. (Display time varies in different modes)
FCC Statement: This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC NOTE : The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Pad 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/ TV technician for help.
Made in China Limited Warranty: For womanly information, please visit
www.loves.com/produchvarranties
MOBILE TO GO is a trademark of Love’s Travel Stops & Country Stores, Inc.
Copyright 2020. Love’s Travel Stops & Country Stores, Inc. Distributed by
Apollo Purchasing, LLC 10601 North Pennsylvania Avenue, Oklahoma City,
Oklahoma 73120
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>