TRANSCORE AT5720 Check Tag Owner’s Manual
- June 9, 2024
- TRANSCORE
Table of Contents
TRANSCORE AT5720 Check Tag
The AT5720 Check Tag provides a means by which the user may perform end-to-end
status checks of TransCore technology systems. The AT5720 Check Tag is
installed within or near each antenna connected to a reader.
The AT5720 Check Tag obtains power and control signals directly from the
reader or radio frequency (RF) module and is turned on at prescribed intervals
controlled by the reader or host computer. When the AT5720 Check Tag is turned
on, the system reads its ID, as with any other tag. Failure to detect the
check tag ID alerts the user to possible failure within the system.
All TransCore AI1200 Reader firmware versions higher than Version 2.3 and all
versions of the MPRX incorporate AT5720 Check Tag control functions. The
8100-series firmware commands enable the user to control system tests, set
the time intervals for controlling one or two AT5720 Check Tags, and define each AT5720 Check Tag signature and address for diagnostic purposes. Once set, the AT5720 Check Tag signatures and addresses are saved in nonvolatile memory so they are retained even through interruptions in power. The AT5720 Check Tag has an external cable for connection to the reader or RF module via three wires: power, ground, and check tag control. Selected antennas may be ordered with the AT5720 Check Tag already installed.
Features
- Status-check capability
- External cable for connection to reader or RF module
Applications
- Rail traffic monitoring
- Automatic data capture
COMMUNICATIONS
Frequency Range
902 to 928 MHz 2400 to 2500 MHz
Typical Working Range
902 to 928 MHz (free space): 80 ft (24 m)
902 to 928 MHz (metal mount): 56 ft (17 m)
2400 to 2500 MHz (free space): 30 ft (9 m)
2400 to 2500 MHz (metal mount): 70 ft (21 m)
Range depends on system parameters.
Working Range (maximum)
902 to 928 MHz (free space):160 ft (49 m)
2400 to 2500 MHz (free space): 40 ft (12 m)
2400 to 2500 MHz (metal mount): 70 ft (21 m)
Polarization
Parallel with longer side
POWER REQUIREMENTS
Power Source
7 to 30V DC (typically from AI1200 Reader)
PHYSICAL
Dimensions
Size: 3.6 x 2.3 x 0.4 in. (9.2 x 5.9 x 1.1 cm)
Weight: 2.5 oz (70 g)
Case Material
Weatherproof, sealed
Mounting Surface
Metallic or free space
ENVIRONMENTAL
Operating Temperature
-40°F to +185°F (-40°C to +85°C)
ACCESSORIES
Selected antennas may be ordered with the AT5720 Check Tag installed.
MODEL PART NUMBERS
13-5720-NNN
For more information:
Sales Support
800.923.4824
Technical Support
505.856.8007
transcore.com
© 1998-2023 TransCore LP. All rights reserved. TRANSCORE is a registered trademark and is used under license. All other trademarks listed are the property of their respective owners. Contents are subject to change.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>