Cosmic Byte CosmoBuds X100 True Wireless Gaming Earbuds User Manual

June 9, 2024
Cosmic Byte

switch to god mode
CosmoBuds X100

TRUE WIRELESS GAMING EARBUDS User Manual

CosmoBuds X100 True Wireless Gaming Earbuds

SPECIFICATIONS

Bluetooth Version V5.3
Low latency 38 ms under game mode
Driver size 10mm
Frequency Response 20Hz-20Khz
SNR 98dB
Music playtime Up to 7 hours per charge (at 70% volume)

Up to 1O hours per charge (at 50% volume)
Talk time| up to 7 hours
Standby time| 100 days
Transmission Range| 10m
Battery Earbuds| 40 mAh
Charging case| 400 mAh
Charging time| About 1.5 hours
Charging interface| Type-C
Fast Charging| 15 min = 100 min playtime

PACKAGE CONTENTS

HOW TO CHARGE THE COSMOBUDS X100

  • During use if the LED light on the TWS ashes with voice reminder “Battery Level Low”, it indicates that the TWS battery level is low.
  • To charge place the earbuds into the charging case.
  • The LED on the earbuds will turn on indicating that the earbuds are charging.
  • Once the earbuds are charged the LED on it will turn off.

CHARGING CASE

To charge the case plug it to a 5V/1A charger using the included Type C Cable.
Once the indicator on the charging case Displays 100% charge you can disconnect the charger.

5V / 40 MA (EARBUDS) 5V / 400 MA (CHARGING CASE)

PAIRING THE X100 TO YOUR BLUETOOTH DEVICE

A) FIRST TIME USER- SMART POWER ON
a. Once you remove the earbuds from the charging case, they will automatically enter pairing mode.
b. Visit your mobile Bluetooth settings, New Device and connect to “CosmoBuds X100”
c. The CosmoBuds X100 will automatically pair with your mobile and is ready for use.

B) MANUAL PAIRING- MANUAL POWER ON
a. Long press the touch buttons on both the earbuds simultaneously until the LED lights on the earbuds start to fiash.
b. The earbuds will connect to each other and enter pairing mode.
c. Visit your mobile Bluetooth settings, New Device and connect to “CosmoBuds X100”
d. The CosmoBuds X100 will automatically pair with your mobile and is ready for use.

INSTANT ON AND PAIR (IOP™)

The CosmoBuds X100 feature instant on and pairing feature. Once you have connected the Earbuds to your device it will automatically connect to your mobile device as  soon as you remove it from the case.

NOTE:
Pairing mode lasts for 5 minutes. If the pairing time is missed, then you will need to reconnect the earbuds and follow the above-mentioned procedure.
X100 remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected device.

USING SINGLE EARBUD ONLY

Please note that both the earbuds can be used in mono mode.
Step 1: Use either of the two options; Smart Power On or Manual Power On for switching on the desired earbud;
Step 2: The selected earbud will automatically enter the connection mode.
Step 3: Turn on Bluetooth on your phone/media device and search for ‘CosmoBuds X100’ to connect.

NOTE:
To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, enabling Stereo usage.

SMART POWER OFF
Simply place the X100 into the charging case in correct orientation, they will switch off automatically and enter charging mode.

MANUAL POWER OFF
Long pinch the touch button on either earbud for five seconds to manually switch off the X100.

HOW TO SWITCH MODES
Triple Pinch Press the Touch Button on right earbud to switch between GOD Mode and Music Mode. GOD Mode enables 38 ms low latency sound and enables accurate sound positioning.
Music Mode enables the integrated music engine for High Fidelity Audio and Bass.

TOUCH FUNCTIONS

MUSIC PLAYBACK MODE

CALLING MODE

GOD MODE/MUSIC MODE

Triple Pinch the Touch Button on right earbud to switch between Game Mode and Music Mode GOD Mode enables 38 ms low latency sound and enables accurate sound positioning.
Music Mode enables the integrated music engine for High Fidelity Audio and Bass.

VOICE ASSISTANT
Triple Pinch the Touch Button on left earbud to activate your phone’s default smart voice assistant.
NOTE:
Volume cannot be controlled via earbuds and can only be adjusted via phone/media device

FACTORY RESETTING

THE COSMOBUDS X100

Perform the Factory Reset in case you face any dificulty while operating your X100 Earbuds
Note: Before performing reset, clear “CosmoBuds X100” from paring device history by forgetting the TWS
Step 1: Take out both the earbuds from the charging case.
Step 2: Double pinch the Touch Button on both earbuds to perform the reset. Blue LED will turn on.
Step 3: After the reset, place the earbuds inside the charging case, close the lid and wait for 5 seconds.
Step 4: Congratulations! Your X100 has been reset and ready to pair again.

TROUBLESHOOTING

Potential Problem Solution
If one earbud is not working Perform the Factory Reset
If earbuds are unable to connect Perform the Factory Reset
If earbuds disconnect during phone call Charge the earbuds or perform the

Factory Reset
If there are other exceptions in usage|  Place the earbuds back into the charging case and try  using them  again or perform the Factory Reset

WARNING

  • Please follow the instructions to operate.
  • Please charge the ear-buds with input power below 5V/1A in order. to protect the battery.
  • Please don’t use the ear-buds in extreme temperatures.
  • Please don’t use the product near water.
  • Please keep the product away from heat sources, as the heat may damage it.
  • Don’t jam the ports such as charger port, LED port, etc.
  • It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life.
  • Never disassemble or modify the device to avoid any permanent damage or danger.
  • Do not use the device during a thunderstorm to avoid irregular function or risk of electric shock.
  • Don’t use harsh chemicals to clean the device.

Advisable: The earbuds start at a 100% volume and it may need to be reduced when the earbuds are switched on at first. This can be done by using the volume control on the phone/ media device.

HOW TO REMOVE VOLUME LIMIT ON ANDROID AND iOS TO INCREASE THE VOLUME

iOS

  1. Go to Settings > Music
  2. Move the slider of Sound Check to the left to turn it off.

This will remove the iOS volume limit so that earbuds can play at full volume.

ANDROID

  1. Go to Settings > Bluetooth
  2. Click on CosmoBuds X100
  3. In the options turn off option Sync Volume with phone

NOTE: ABOVE OPTION MAY NOT BE AVAILABLE IN ALL ANDROID PHONES. DEPENDING ON THE PHONE MODEL AND MANUFACTURER.

REMOVE SPOTIFY & AMAZON MUSIC VOLUME LIMIT.

Spotify and Amazon Music does not use system volume limit so you have to go to app settings and turn off Audio Normalisation to remove the limit.

SUPPORT DETAILS
Phone: 1800 31300 7700 (Mon-Fri 10am to 5PM)
Email: cc@thecosmicbyte.com
FAQ: support.thecosmicbyte.com

WARRANTY
The Cosmobuds X100 carries 1 Year warranty against manufacturing defects only.
Physical, Water damage and Tampered products are not covered under warranty.
Regular wear and tear from battery usage is not covered under warranty.

https://www.youtube.com/watch?v=I2vxO17Sprs&t=2s

FAQ’S
support.thecosmicbyte.com
CERTIFICATIONS

Documents / Resources

| Cosmic Byte CosmoBuds X100 True Wireless Gaming Earbuds [pdf] User Manual
CosmoBuds X100 True Wireless Gaming Earbuds, CosmoBuds X100, True Wireless Gaming Earbuds, Wireless Gaming Earbuds, Gaming Earbuds, Earbuds
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals