ASUS Rog Strix Scope NX Wireless Deluxe Mechanical Keyboard User Guide
- June 9, 2024
- Asus
Table of Contents
- ASUS Rog Strix Scope NX Wireless Deluxe Mechanical Keyboard
- Package Contents
- Keyboard features
- Connecting your gaming keyboard
- Updating the firmware and customization
- Battery Status
- Key combinations
- Switching between different paired host devices
- Limitation of Liability
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ASUS Rog Strix Scope NX Wireless Deluxe Mechanical Keyboard
Package Contents
Keyboard features
Top view (US layout for reference)
Rear view
- Num Lock indicator
- Caps Lock indicator
- Scroll Lock indicator
- Function Lock indicator
- Win lock indicator
- RGB indicator
- Kickstand
- Power switch
- USB Type-C® port Magnetic dongle storage
- Magnetic wrist rest
Connecting your gaming keyboard
Using the bundled cable
Connect the bundled USB Type-C® to Type-A cable to your gaming keyboard and a USB port on your computer
Pairing Bluetooth mode for the first time
Set the connection switch to the Bluetooth mode.
Using RF wireless mode
- Connect the USB dongle to a USB port on your computer.
- Set the connection switch to the RF 2.4G Wireless mode.
Pairing Bluetooth mode to additional host devices (max. 3)
- Set the connection switch to the Bluetooth mode.
- Press and hold the FN + 7 for 3 seconds until the RGB indicator on your gaming keyboard starts to blink blue.
Once your gaming keyboard has been successfully paired, the RGB indicator on your gaming keyboard will light up blue for 3 seconds.
Updating the firmware and customization
- Connect your gaming keyboard using the bundled cable and the USB dongle to USB ports on your computer.
- Download and install the Armoury Crate software from https://rog.asus.com
- Follow the software instructions to update your gaming keyboard firmware.
- Customize your gaming keyboard using Armoury Crate.
Battery Status
The RGB indicator on your gaming keyboard will turn red (blinking) and the
LEDs for all the other keys will switch off when the battery power is below
20% in wireless mode. You may charge your gaming keyboard by using the bundled
USB cable.
NOTE: When charging the wireless gaming keyboard, the power output may
vary according to the USB port you connect your gaming keyboard to.
Key combinations
Function key
Stealth Mode: Minimize all windows and mute / Maximize all windows and
unmute
F12: Minimize all active windows and mute the system, or maximize all
minimized windows and unmute the system.
NOTE: This function is only available when the F5 – F12 keys are toggled
to Media Function.
On-the-fly Macro Recording
Step 1 : Fn + Left-ALT to start recording Step 2 : Fn + Left-ALT to end
recording Step 3 : Assign Macro Key
Profile Switch
Fn + 1 / 2 / 3 / 4 / 5 / 6*
**6 is default
Light Effect Switch
Fn + Right or Fn + Left
Brightness Level
Fn + Up
Fn + Down
Factory Default =**
Fn + Esc: Hold these two buttons until the LEDs blink green.
NOTE: When running AURA SYNC, the hot key related with the lighting effect will be disabled, for example: Profile switch, Lighting effects switch, Brightness level.
Switching between different paired host devices
Hot Key | Function | Lighting effect color |
---|---|---|
Fn + 8/9/0 | BLE paired device 1 (default) | 8/9/0 key will remain lit up in |
white
* The key that remains lit up in white can be turned off in Armoury
Crate.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other
liability, you are entitled to recover damages from ASUS. In each such
instance, regardless of the basis on which you are entitled to claim damages
from ASUS, ASUS is liable for no more than damages for bodily injury
(including death) and damage to real property and tangible personal property;
or any other actual and direct damages resulted from omission or failure of
performing legal duties under this Warranty Statement, up to the listed
contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims
based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum
for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS
OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS
SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
RF exposure warning
The equipment complies with FCC RF exposure limits set forth for an
uncontrolled environment.
The equipment must not be co-located or operating in conjunction with any
other antenna or transmitter.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Simplified UKCA Declaration of Conformity:
ASUSTek Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of The Radio
Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of
conformity is available at https://www.asus.com/support/.
CE Mark Warning
Manufacturer | ASUSTeK COMPUTER INC. |
---|---|
Address, City | 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112 |
Authorized Representative in Europe | ASUS COMPUTER GmbH |
Address | Harkortstrasse 21-23, 40880 Ratingen |
Country | Germany |
Authorized Representative in United Kingdom | ASUSTEK (UK) LIMITED |
Address | 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M |
6BL, England
Country| United Kingdom
References
- ROG - Republic of Gamers|Global | For Those Who Dare
- ÐžÑ„Ð¸Ñ†Ð¸Ð°Ð»ÑŒÐ½Ð°Ñ Ñлужба поддержки | ASUS РоÑÑии
- Official Support | ASUS Global
- ASUS в СÐГ
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
- ROG - Republic of Gamers|Global | For Those Who Dare
- ROG - Republic of Gamers|Global | For Those Who Dare
- Official Support | ASUS Global