elgato 10LAD9901 Key Light Mini Portable LED Panel User Guide

elgato 10LAD9901 Key Light Mini Portable LED Panel User Guide

Overview

Charging Key Light Mini

Connect Key Light Mini with the supplied USB cable to a 5 V USB charger with min 2.4 A. The charging process will start automatically and the charging level will be shown by the battery status indicator. Once charging is complete (after around 60-100 min) all LEDs will be steadily lit.

Key Light Mini can support fast charge upto 5V, 3A. Be sure to use a proper USB fast charge cable.

Using Key Light Mini

Place Key Light Mini on a flat surface, attach it to a 1/4″ mount (e.g. Elgato Multi Mount) or stick it onto a magnetic surface.

Push the On/Off button for 5 seconds to turn on Key Light Mini. Push the button again to turn it off.

Key Light Mini is in brightness mode by default. Briefly press the jog wheel to enter color temperature mode (Key Light Mini will flash twice), and repeat to return to brightness mode (Key Light Mini will flash once). Push the jog wheel up/down to adjust the intensity of brightness or color temperature.

Push the jog wheel for 5 seconds to disable/enable Wi-Fi.

Off
Wi-Fi is deactivated
Flashing
Key Light Mini is not paired or network is not found
On
Key Light Mini is connected

Installation (Software)

1. Download and install the Control Center app for Mac, Windows, iOS or Android.
   
   
   

2. Switch on Key Light Mini. It will take  approximately 5 seconds to boot up.
   

3. Launch the Control Center app and pair Key Light Mini by clicking the + icon.
   For Wi-Fi pairing using a Mac, turn on your Key Light Mini, click the Wi-Fi icon in the top right Status menu, and select your new accessory. After completing the Airport Utility setup process, your Key Light Mini is accessible from Elgato Control Center.
   

4. Use Control Center to switch Key Light Mini on/off, adjust brightness, fine-tune color temperature and configure advanced settings.
   

If your PC is not equipped with Wi-Fi, use the Elgato Control Center app on your iOS or Android device to add Key Light Mini. A Wi-Fi connection is only needed for initial pairing. Once paired, you can control Key Light Mini via any wired or wireless device in your network.

Advanced Settings Via the Control Center App

If your Key Light Mini is connected to mains all the time, enable Studio Mode to completely bypass the battery. This mode will help to extend the lifetime of your battery and avoid overheating during long hours of operation. Enable Energy Saving Mode to turn off Wi-Fi and dim the light if the battery level is low. Set your personal threshold for activating Energy Saving Mode by adjusting the battery level.

Reset

Power on Key Light Mini. Push and hold the Reset button with a small tool for at least 10 seconds until the light flashes 3 times. Then release the button. Key Light Mini will restart automatically after a few seconds.

Reset will restore Key Light Mini factory settings and forget all Wi-Fi credentials.

Battery Information

We at Elgato care about our environment and put big efforts in product safety as well as product lifetime when designing this product. Therefore, Key Light Mini comes with a 12 Watt, state-of-the-art fast charging circuit with automatic current limit, capacity limit, temperature threshold and over- voltage protection. It also offers intelligent Power Path Management to minimize charging time and maximize efficiency. We use superior battery chemistry and do not run the product at the edges of its specs. The product design offers the opportunity to exchange the battery (battery kit sold separately) and software settings can help to reduce battery drain. We at Elgato believe in our quality and offer a two-year battery warranty under the following conditions:

• Ensure that you only use chargers with 5 V and 2.4 A or a higher charging current.
• The temperature range for charging, using and storing the product must be in between 5 °C and 35 °C (41 °F and 95 °F).
• Bypass mode should be used whenever possible to preserve battery life.
• Only use this product for its intended purpose. Follow the general and battery safety instructions as described in the user manual. Any misuse can cause electric shock, burns, fire and other hazards or injuries.
• Never burn this product and/or its batteries. Do not expose batteries to direct sunlight or very high temperatures (e.g. hot car, hot stove). Batteries may explode if overheated.
• If the product becomes very hot, gives off a strange smell or changes color, immediately stop using and charging the product.
• Never place products and/or batteries in microwave ovens or on induction cookers.
• Always charge batteries in time.
• Never modify, short-circuit, reverse charge or damage products and/or batteries.
• Do not let battery terminals come into contact with any metal objects to avoid short-circuiting of batteries.
• Do not wrap batteries in metal foil. Tape battery terminals or put batteries in a plastic bag before you discard them.
• Do not expose batteries to any liquids.
• Make sure your hands, the product, and the batteries are dry when handling batteries.
• Avoid contact with the skin or eyes if batteries are damaged or leaking. If this occurs by accident, immediately rinse well with water, and seek medical care.

Follow your country’s rules for the separate collection of electrical and electronic products and rechargeable batteries. Correct disposal helps prevent negative consequences for the environment and human health.

Warning

• Key Light Mini may become hot during prolonged use. Always handle with care.
• If you have an ICD or pacemaker, avoid close or prolonged contact with magnets or their magnetic fields.
• Do not cover Key Light Mini, especially its backplate.
• Do not place on or near a carpet, curtains, or any other flammable materials.
• Be especially cautious when setting up near children.
• Do not attach items to Key Light Mini.
• Do not leave Key Light Mini exposed to direct sunlight or high humidity.
• Do not set up in areas susceptible to strong air currents. Drafts and breezes can cause movement that may result in damage to the product.
• Keep Key Light Mini free from dirt and dust. If it becomes dirty, wipe it lightly with a soft cloth moistened with a little water and mild, neutral detergent. Benzene, thinner, and other volatile agents can cause permanent damage and should never be used for cleaning.
• Only use accessories supplied with the product or sold by the manufacturer.

| FCC| IC|

CE

---|---|---|---
2.4 GHz| 2412 – 2462 MHz| 2412 – 2462 MHz| 2412 – 2472 MHz
5 GHz (Band 1 & 2)| 5180 – 5320 MHz| 5180 – 5320 MHz| 5180 – 5320 MHz
5 GHz (Band 3)| 5500 – 5700 MHz| 5500 – 5800 MHz| 5500 – 5700 MHz
| | 5660 – 5700 MHz|

X

5 GHz (Band 4)| 5745 – 5825 MHz| 5745 – 5825 MHz|

Wi-Fi 2.4 GHz Max RF e.i.r.p power < 20 dBm, Wi-Fi 5 GHz Max RF e.i.r.p. power < 23 dBm, Temperature range: 0 °C – 45 °C

This equipment complies with FCC RF, IC RSS-102 and CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For indoor use only.

Hereby, Corsair Memory Inc. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The declaration of conformity for Elgato products is available at www.elgato.com/doc

FCC STATEMENT

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body.

For questions about Elgato product compliance with FCC regulations, please contact: Compliance Officer, Corsair Memory Inc., 115 North McCarthy Blvd, Milpitas, CA 95035, USA

IC NOTICE TO CANADIAN USERS
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference., (2) This device must accept any interference, including interference that may cause undesired operation of the device. The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual.

Elgato, a division of:
Corsair Memory Inc., 115 North McCarthy Blvd, Milpitas, CA 95035, USA Corsair Components Limited, 1020 Eskdale Road, Winnersh Triangle, Wokingham, RG41 5TS, UK
Corsair Memory, BV Wormerweg 8, 1311 XB, Almere, Netherlands
Copyright 2018 – 2022 Corsair Memory Inc. All rights reserved. Elgato and the Elgato logo are trademarks of Corsair Memory Inc., registered in the U.S. and other countries.
Part: 51LAD9904

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>