lotronic 10-5573MA Stand-Alone Party Speaker User Manual

June 9, 2024
lotronic

madison logo

lotronic 10-5573MA Stand-Alone Party Speaker

lotronic 10-5573MA Stand-Alone Party Speaker

STAND-ALONE PARTY SPEAKER 2 X 8″/20CM – 600W
WITH BLUETOOTH, USB, TF, TWS, AUX & LIGHT EFFECT

ENCEINTE AUTONOME – 2 X 8″/20CM – 600W
AVEC BLUETOOTH, USB, MICRO-SD, TWS, AUX & EFFET LUMINEUX

PARTY SPEAKER 2 X 8″/20CM – 600W
MET BLUETOOTH, USB, MICRO-SD, TWS, AUX & LICHT EFFECT

PARTY BOX – 2 X 8″/20CM – 600W
CON BLUETOOTH, USB, MICRO-SD, TWS, AUX Y EFECTO LUMINOSO

OPERATING INSTRUCTIONS

Please read the manual carefully and keep it for future reference.
Congratulations to the purchase of your new speaker.

Explanation of signs

Accordance with the requirements of UK standards

The product is for indoor use only

CAUTION:

  • The unit shall be connected to a power supply only of the type described.
  • The appliance may not be exposed to extreme temperatures (<+5°C/> +35°C) in operation.
  • Please place the equipment on a level and stable platform. Never place the appliance on an unstable or movable surface. Persons could be injured or the appliance damaged.
  • No naked flame sources such as lighted candles should be placed on the apparatus.
  • For indoor use only

PRIOR TO FIRST USE

Insert the small connector of the adaptor into the charging port (17) on the top of the speaker, insert the large connector into a wall outlet.
The display (16) shows the battery icon increasing while charging until the battery is fully charged. If the battery voltage is low, a tone will be heard, indicating that the battery needs to be charged.

IMPORTANT NOTE FOR APPLIANCES CONTAINING LITHIUM-ION BATTERIES

  1. PRIOR to using the unit for the first time, please charge fully the battery
  2. Charge the battery regularly after each use. Don’t wait until it is discharged!
  3. DON’T allow the battery to discharge completely, otherwise it will lose 20% of its capacity or even be totally damaged! If the voltage becomes too low, the internal circuits are not powered anymore and it will become impossible to recharge the battery!
  4. If you don’t use the unit for a longer period of time, it is recommended to charge it at 40% of its capacity and check/charge it once per month.

The life time of the battery depends on the observance of these recommendations.
BATTERIES ARE NOT COVERED BY THE WARRANTY

We cannot be held responsible for damaged batteries further to the non- observance of these basic rules.

TOP PANEL DESCRIPTION

  1. USB input: For playing music
  2. TF /microSD card input
  3. AUX input
  4. GUITAR input: Connect a guitar to this input
  5. MIC INPUTS: Connect a mic to these inputs
  6. VOLUME Rotate to adjust the overall volume.
  7. MENU: Adjusts the mic volume, echo, treble and bass in conjunction with volume control (6).
  8. MODE: Press this button to toggle between modes: BT, AUX, USB, microSD.
  9. REC: Press to start recording your voice on USB/microSD
  10. NEXT SONG: Press this button to move to the next track.
  11. PLAY/PAUSE ▶ǁ/TWS
  12. PREVIOUS SONG: Press this button to move to the previous track.
  13. Light switch: Press to cycle through the various light effects and switch the light effect off.
  14. Mic priority: Press to reduce the volume of all other input sources while you are talking into the microphone
  15. Power ON/OFF switch
  16. Display
  17. 9V input to charge the built-in battery

lotronic 10-5573MA Stand-Alone Party Speaker 2

BLUETOOTH OPERATION

Keep the power button (15) pressed to turn the speaker on. “bLUE” is slowly flashing on the display (16) to indi-cate that the speaker is on. Keep the power button (15) pressed to turn the speaker off. The display will always show “bLUE” when the speaker is connected to a Bluetooth device.
Turn on the Bluetooth function on your external Bluetooth device and select “NASH” in the list of found devices. If a password is required, enter “0000” . After successful pairing, you will hear a tone.

AUX/LINE OPERATION
To use the speaker with an AUX/LINE source, plug one connector of the 3.5mm audio cable into the 3.5mm auxiliary audio input jack (3) on the speaker. Plug the other connector into the headphone jack of your me-dia-playing device. Used the MODE button (8) to switch into LINE mode. The display will show “LINE”. Playback is controlled via the connected device.

USB OPERATION
Insert a USB device into USB port (1) to play the music stored on the drive. The play will start automatically.

MICRO-SD OPERATION
Insert a microSD card into the TF port (2) to play music stored on the drive. The play will start automatically.

FUNCTIONS OF THE MENU BUTTON (7)

Press the MENU (7) button and rotate the volume knob (6) to control the following functions in sequence: Press 1x: T= Treble
Press 2x: b= Bass
Press 3x: n= Mic vol
Press 4x: E= MIC Echo
Press 5x: d= MIC Delay
Press 6x: gt=Guitar Treble
Press 7x: U= Music vol

MODE BUTTON (8)
Press this button to toggle between modes: BT, AUX, USB, TF

MIC PRI (14)
Short press this button to activate the microphone priority function in BT, USB, TF mode. The display will show “n-ON”. Press again to cancel this function. The display will show “n-OF”. When this function is activated, the music will stop when you speak into the microphone and resume when your stop speaking.

REC (9)
This function is only available in USB/TF mode. You can only record the sound of the microphone. Keep the button pressed for about 3 seconds to start recording. Short press the REC button to stop recording. Short press again to listen to your record.

NEXT TRACK (10)
Short press the button (10) to move forward in steps through the playlist in BT, USB and TF mode. Keep the button pressed to browse fast forward through the music in USB and TF mode.

PREVIOUS TRACK (12)
Short press this button (12) to move back through the playlist in BT, USB and TF mode. Long press this button to browse quickly backwards through the tracks in USB and TF mode.

PLAY/PAUSE / TWS (11)
Short press this button to play/pause (11) the music in BT, AUX, USB, TF mode. Long press this button to enter into TWS mode. When TWS pairing is successful, you can find just one pairing name then select it and connected, then you can control by your device, you can long press one TWS button of one unit to stop TWS of two unit.

TWS FUNCTION

  1. Keep the PLAY/PAUSE/TWS button (11) pressed to enter into TWS mode. The displays on both speakers will show “t-ON” when TWS pairing was successful.
  2. Activate the Bluetooth function on your smartphone and select “NASH” in the list of found devices.
  3. “Blue” is flashing slowly on the display of one of the speakers and the display of the other speaker will show “BT01”.
  4. Now you can control the speakers via your Bluetooth device.
  5. To cancel the TWS function, keep the TWS button pressed on one of the speakers. The display will show “t-OF”.

Please note: If you add a second NASH speaker for the first time, please delete the speaker first from your Bluetooth devices, make the TWS pairing and then search for NASH on your smartphone.

LED SWITCH (13)
Short press to cycle through the various light modes. Keep the button pressed to turn on/off the light.

TROUBLE SHOOTING

If a problem occurs, follow the steps in the table below. If problem still can’t be solved, please contact your retailer.

PROBLEM                   POSSIBLE CAUSE SOLUTION

No sound when power on| 1. No input source| 1. Connect an input source
2. Volume set to minimum| 2. Set the volume to an appropriate level
Distorted sound| 1. Master volume is set too high| 1. Reduce the volume
2. Damaged speaker| 2. Check if the speaker is damaged

No sound from Karaoke

| 1. Microphone plug is not firmly inserted| 1. Insert the mic firmly into the socket
2. The microphone is not switched on| 2. Switch the microphone on
3. Mic volume set to the minimum| 3. Increase the microphone volume
No sound from MP3| 1. Unsupported file format| 1. Change into MP3 format
source| 2. USB/TF source not properly inserted| 2. Insert the USB/TF source properly

SPECIFICATIONS

Input voltage……………………………………..9V 1.5A via supplied mains adaptor
Built-in battery………………………………….. Lithium-ion 7.4V 3600mAh
Consumption…………………………………….40W
RMS/peak power…………………………….50W/600W
BT freq. band…………………………………. 2402-2480MHz
Max RF emission power…………………..2.37dBm
Dimensions……………………………………..260 x 270 x 610mm
Net weight…………………………………….. 5.6kg

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

EXTERNAL POWER SUPPLY WITH MAINS ADAPTOR

ERP DIRECTIVE 2009/125/EC, RÈGLEMENT CE 2019/1782

  1. Importer…………………………………………………………. Lotronic SA – Av Z. Gramme 9 – B-1480 Saintes
  2. Company reg. n°……………………………………………………….. 75110090000016
  3. Brand ………………………………………………………………….. MADISON
  4. Model…………………………………………………………………… MR-0901500EU-05
  5. Input voltage …………………………………………… 100-240~
  6. Input AC frequency ………………………… 50/60 Hz
  7. Output voltage ……………………………………….. 9.0 V
  8. Output current  ……………………………………….. 1.5 A
  9. Output power ……………………………………… 13.5 W
  10. Average active efficiency ………………. 84.85%
  11. Efficiency at 10% load : ……………… 80.95%
  12. No-load power consumption  0.08 W

EU Declaration of Conformity

Hereby we, LOTRONIC SA
Avenue Zénobe Gramme, 9
1480 SAINTES
Belgique
+32.2.390.91.91

Certify and declare under our sole responsibility that the following product:

Trade name: MAD
Product name: Portable speaker
Type or model: MAD-NASH60

Conforms to the essential requirements of the RED directive 2014/53/EU, ErP directive 2009/125/EC, Commission Regulation (EC) No 2019/1782, 2011/65/EU RoHS directive, the Commission Delegated Directive (EU) 2015/863 and the battery directive 2006/66/EC, based on the following specifications applied:

  • EN 62368-1 : 2014 + A11 : 2017
  • EN 50663 : 2017
  • EN 62479 : 2010
  • ETSI EN 301 489-1 V2.2.3 : 2019-11
  • ETSI EN 301 489-17 V3.2.4 : 2020-09
  • EN 55032 : 2015 + A11 : 2020
  • EN 55035 : 2017 + A11 : 2020
  • EN 61000-3-2 : 2019
  • EN 61000-3-3 : 2013 + A1 : 2019
  • ETSI EN 300 328 V2.2.2 : 2019-07
  • EN 50563 : 2011 + A11 : 2013
  • IEC 62133-2 : 2017
  • IEC 62321-3-1 : 2013
  • IEC 62321-4 : 2013 + AMD1 : 2017
  • IEC 62321-5 : 2013
  • IEC 62321-6 : 2015
  • IEC 62321-7-1 : 2015
  • IEC 62321-7-2 : 2017
  • IEC 62321-8 : 2017

Place and date of issue:
Saintes ( Belgium ), on 11/07/2022
Manuel De Sousa
Quality Manager

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals