MEISHILE 12V DC 18 Output Switch Mode CCTV Power Supply Instruction Manual
- June 9, 2024
- MEISHILE
Table of Contents
MEISHILE 12V DC 18 Output Switch Mode CCTV Power Supply Instruction Manual
Connection Diagram
Parallel CCTV Camera Connection
The current is not evenly distributed; the output current of a single group
cannot exceed the value of the fuse(2A), and the total output current cannot
exceed the output current of the built-in Switch Mode Power Supply; Connect
adjacent output ports in parallel with wires, can obtain a larger current.
Test and Measurement
To determine the current(A) draw of a camera remove the jumper link, set you meter to r= A/Amps DC, and with the camera connected measure the current across the ON and COMMON terminals.
Caution :
Please make sure of the local input voltage before using this power supply. So
to select the right input voltage (AC 110V or AC 220V), Wrong input voltage
will broken the machine.
For Indoor Use Only
Specifications :
Input voltage: AC 85-145V / AC 185-265V
Output Voltage: 12V
Rated Output Of The Switch Mode Power Supply: 10A (12V 120W) / 20A (12V
240W) / 30A (12V 360W)
Recommended Total Output Current:
Not exceed 70% of the Rated Current, in 85-145V;
Not exceed 80% of the Rated Current, in 185-265V:
Specification Of Fuse: F2A250V
Connection Diagram
Parallel CCTV Camera Connection
The current is not evenly distributed; the output current of a single group
cannot exceed the value of the fuse(2A), and the total output current cannot
exceed the output current of the built-in Switch Mode Power Supply; Connect
adjacent output ports in parallel with wires, can obtain a larger current.
Test & Measurement
Caution
Please make sure of the local input voltage before using this power supply, So to select the right input voltage (AC 110V or AC 220V), wrong input voltage will broken the machine.
For indoor use only.
Specifications :
Input voltage: AC 85-145V / AC 185-265V
Output Voltage: 12V
Rated Output Of The Switch Mode Power Supply: 10A (12V 120W) / 20A (12V
240W) / 30A (12V 360W)
Recommended Total Output Current:
Not exceed 70% of the Rated Current, in 85-145V;
Not exceed 80% of the Rated Current, in 185-265V:
Specification Of Fuse: F2A250V
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>