MSI Evangelion Case: MPG GUNGNIR 110R EVA e-PROJECT User Guide

The MSI Evangelion Case: MPG GUNGNIR 110R EVA e-PROJECT User Guide provides detailed instructions on how to assemble and use the gaming case. This user guide includes information on the accessories included with the case, such as the fan splitter cable, cable ties, and screws for motherboard, SSD, PSU, PCIe card, and HDD installation. The guide also provides specifications for the fan LED controller, pre-installed fans, case dimensions, motherboard support, drive bays, IO panel, fan support, radiator support, and clearance for CPU cooler height, graphics card length, and PSU length. Additionally, the guide features step-by-step instructions on how to install SSDs and HDDs, open the left and right side cover, install the motherboard and graphics card, connect cables, and install the PSU. The guide also explains how to use the LED switch button to change LED effects and synchronize with MSI motherboard Mystic Light. This user guide is essential for anyone who wants to assemble and use the MSI Evangelion Case: MPG GUNGNIR 110R EVA e-PROJECT.

GUNGNIR 110R
EVA e-PROJECT
User Guide

Accessories

Specification

Rear: 120 mm ARGB fan x1
Case Dimensions| 430(D) x 215(W) x 450(H)
16.92(D) x 8.46(W) x 17.71(H) inch
Motherboard Support| ATX / M-ATX / Mini-ITX
Drive Bays| 2x 3.5″ / 2.5″ combo trays 2x 2.5″ SSD trays
IO Panel| 1x Power button
1x LED switch button
1x Reset button
1x Mic in jack
1x Audio out jack
2x USB 3.2 Gen1 Type A ports
1x USB 3.2 Gen2 Type C port
Fan Support| Top: 120 mm x2 / 140 mm x2
Front: 120mm x 3 / 140mm x 2
Rear: 120 mm x1
Radiator Support| Top: 120 /240 mm
Front: 120 / 140 / 240 / 280 / 360 mm
Rear: 120 mm
Clearance| CPU Cooler Height: Max 170 mm / 6.69 inch
Graphics Card Length: Max 340 mm / 13.38 inch
PSU Length: Max 250 mm / 9.84 inch
Material| Left Side: Tempered glass
Right Side: Metal
Top: Metal
Front: Glass + Metal

Case Features

Side & Front View

IO Panel

1. Power button
2. Reset button
3. Power LED
4. USB 3.2 Gen2 Type C| 5. USB 3.2 Gen1 Type A
6. Mic in
7. Audio out
8. LED switch button
---|---

LED effects:
Short press the LED switch button to change up to 27 modes.
Press and hold the LED switch for 3 seconds the LED flash white light once, and then into the MSI motherboard Mystic Light synchronization mode. Short press once to back to the Hub control mode.
Press and hold the LED switch for 6 seconds to turn off the LED.

SSD & HDD Installation

Opening the Left & Right Side Cover

Motherboard Installation

Cables Connection

Graphics Card Installation

PSU Installation

Specifications

1x LED switch button
1x Reset button
1x Mic in jack
1x Audio out jack
2x USB 3.2 Gen1 Type A ports
1x USB 3.2 Gen2 Type C port|
Fan Support| Top: 120 mm x2 / 140 mm x2
Front: 120mm x 3 / 140mm x 2
Rear: 120 mm x1|
Radiator Support| Top: 120 /240 mm
Front: 120 / 140 / 240 / 280 / 360 mm
Rear: 120 mm|
Clearance| CPU Cooler Height: Max 170 mm / 6.69 inch
Graphics Card Length: Max 340 mm / 13.38 inch
PSU Length: Max 250 mm / 9.84 inch|
Material|  |
Left Side| Tempered glass|
Right Side| Metal|
Top| Metal|
Front| Glass + Metal|
Case Features|  |
Side & Front View|  |
IO Panel| 1. Power button
2. Reset button
3. Power LED
4. USB 3.2 Gen2 Type C
5. USB 3.2 Gen1 Type A
6. Mic in
7. Audio out
8. LED switch button|
LED effects| Short press the LED switch button to change up to 27 modes.
Press and hold the LED switch for 3 seconds the LED flash white light once, and then into the MSI motherboard Mystic Light synchronization mode. Short press once to back to the Hub control mode.
Press and hold the LED switch for 6 seconds to turn off the LED.|
SSD & HDD Installation|  |
Opening the Left & Right Side Cover|  |
Motherboard Installation|  |
Cables Connection|  |
Graphics Card Installation|  |
PSU Installation

FAQ’s

What accessories are included with the MSI Evangelion Case: MPG GUNGNIR 110R EVA e-PROJECT?

The accessories included with the MSI Evangelion Case: MPG GUNGNIR 110R EVA e-PROJECT are a fan splitter cable, cable ties, and screws for motherboard, SSD, PSU, PCIe card, and HDD installation.

What are the specifications for the fan LED controller?

The fan LED controller is a 1 to 6 ARGB (3 pin) control board.

What pre-installed fans come with the case?

The case comes with three 120 mm ARGB fans at the front and one 120 mm ARGB fan at the rear.

What are the dimensions of the MSI Evangelion Case: MPG GUNGNIR 110R EVA e-PROJECT?

The dimensions of the MSI Evangelion Case: MPG GUNGNIR 110R EVA e-PROJECT are 430(D) x 215(W) x 450(H) mm or 16.92(D) x 8.46(W) x 17.71(H) inches.

What type of motherboards does the case support?

The case supports ATX, M-ATX, and Mini-ITX motherboards.

How many drive bays does the case have?

The case has two 3.5″/2.5″ combo trays and two 2.5″ SSD trays.

What is included in the IO panel of the case?

The IO panel includes a power button, LED switch button, reset button, mic in jack, audio out jack, two USB 3.2 Gen1 Type A ports, and one USB 3.2 Gen2 Type C port.

What is the maximum CPU cooler height that the case can accommodate?

The case can accommodate a CPU cooler with a maximum height of 170 mm or 6.69 inches.

What is the maximum graphics card length that the case can accommodate?

The case can accommodate a graphics card with a maximum length of 340 mm or 13.38 inches.

What is the maximum PSU length that the case can accommodate?

The case can accommodate a PSU with a maximum length of 250 mm or 9.84 inches.

How do I change the LED effects of the case?

You can change the LED effects of the case by short pressing the LED switch button. There are up to 27 modes available.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>