COMPASS 07191 Air Compressor Instructions

COMPASS 07191 Air Compressor

Air compressor

• Battery-operated air compressor in a compact design with touch control.
• Diplsej clearly displays the preset values and the current pressure of the inflated object. The battery is charged using a USB-C cable, the process and completion of charging is signaled by the battery symbol.
• The compressor is suitable for inflating tires of passenger cars, motorcycles, bicycles, balls and other inflatable products.Adapters are included in the package.
• The compressor is equipped with a function for automatic inflation to a pre-set pressure. Built-in air gauge, displays the measured pressure in several different units. Thanks to the device’s memory, it is possible to save preset values for individual inflation modes.
• The built-in LED lamp is suitable for lighting the work area.
• For the sake of safe and correct use of the device, ii is necessary to study this manual thoroughly before use.

INSTRUCTIONS FOR USE

• Turning the compressor on

  • Pull the inflation tube out of the device.

• Turning the compressor off

  • Insert the inflation tube back into device.
  • device automatically tu ms off, affer 3 minutes of inactivity
  • device will automatically tum off, if the battery is low

• Battery status
  Status is indicated by the battery symbol on display.

  • green 60-100%chargelevel
  • orange 30-60% charge level
  • red 0-30% charge level

• Charging of the device

  • To start charging, plug the USB-C cable into the device (preferably 5V 2A).
  • The battery symbol flashes while charging.
  • Green battery symbol is lit still, when fully charged

• Change of units

  • Change units, by pressing units change button.

• Mode change

  • By pressing the button to change the mode.

• Device memory

  • In each mode, inflation values can be set individually, they are automatically saved to the device for future use.

• Inflation values settings

  • Use the + and – buttons to set the values for necessary inflation.

• Inflating

  • Screw the hose onto the compressor outlet (use one of the adapters if needed).
  • Attach the tube ending to the object to be inflated (screw it on the tire valve, etc.).
  • The current inflation pressure can be seen on display.
  • Set the mode/necessary value to which you want to inflate.
  • Press the on/off button to start or stop inflating.
  • Inflation stops automatically when the preset value is reached.

• LED lighting

  • Long press the light butt onto turn on/off the LED

• Zeroing the pressure gauge

  • After turning on the compressor, if display shows a value other than O (e.g. when using the compressor at unusual altitudes), simultaneously press the+ and – buttons for approx. 3 seconds, the sound signal will announce the reset of the pressure gauge. ‘do not use when connected to a object which has to be inflated

MAINTENANCE CLEANING AND STORAGE

• This electrical device does not require any special maintenance.
• Use only slightly damp cloth for cleaning. Do not use aggressive cleaning agents.
• Store the compressor in a dry place in a dust-free environment

CAUTION

• Attention! The compressor, especially the outlet and inflating hoses, can be very hot, do not touch them. Allow the compressor to cool completely before handling them.
• The compressor is not intended for long-tenm operation – there is a risk of damage from overheating. The maximum time of use is 20 minutes.
• In case of overheating, switch off the compressor immediately and let it cool down for approx. 20 minutes.
• Never use the compressor while charging.
• Never leave the device unattended when it is switched on.
• The compressor is not intended for inflating the tires of construction machines and tractors.
• Do not expose to rain or water, protect the device from rain or moisture and from flammable liquids or gases

Turning the compressor on and off

WARNING!
When inflating, there may be an outlet ar compressor very hot.
Do not touch the hose, until it cools down

• Do not use the compressor for purposes other than those intended, do not exceed the permissible load of the device.
• Before each use, check the general condition of the compressor and the air hose. In case of damage, the compressor must not be used.

TECHNICAL DATA

DISPOSAL

Electrical devices should not be disposed of together with municipal waste. According to Directive 2002/96 / EC on waste electrical and electronic equipment (WEEE / WEEE) and related national legislation, electrical waste must be separated and recycled. Recycling as an alternative to disposal: the owner of electrical equipment is obliged to hand over the equipment to a collection point or ensure its proper recycling. Electrical waste can be disposed of at a waste collection point operated in accordance with applicable national waste guidelines. This does not apply to accessories without electrical components

Compass CZ s.r.o., Prazska 17 – 250 81 – Nehvizdy, CZ e-mail : info@compass.cz
www.compass.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>