MSI GP10 Liberator Gaming Pedal User Guide

: June 9, 2024
: MSI

Table of Contents

Introductions
Overviews
Get Started
Documents / Resources

MSI GP10 Liberator Gaming Pedal User Guide

Introductions

Thank you for choosing the MSI Liberator with marvelous design. This gaming
pedal will give you a pleasant and professional PC gaming experience. Besides
gaming, you can also use it in video editing and programming. This guide provides instructions to help you understand the product and get started quickly. Therefore, it is recommended that you read this guide before using the MSI Liberator.

Unpacking

MSI Liberator Gaming Foodpedal
USB Cable
Swappable Key Cap, a pair of size Small, Medium and Large each
USB Adapter
User Guide

System Requirements

PC with available USB port
Windows 10/ 8.1/ 8/ 7

Overviews

Product Overawe

Middle Button
Right Button
Left Button
Backlit RGB LED (Brand Logo)
Rear RGB LED in the Round
Swappable Key Cap
USB-C Port (Input: 5V == 3 A)
USB-C Port (Output: 5V == 1.5 A)
USB Adapter (USB-C to USB-A)
Swappable Cap (Small)
Swappable Cap (Large)
Front Right Anti-slip Foot
Front Left Anti-slip Foot
Rear Anti-slip Foot
USB Cable
Front RGB LED in the Round

Get Started

Connect the MSI Liberator USB-C Input port ( ) to the PC USB-C port with the provided USB Cable.
Use the provided USB adapter ( ) for conversion from USB-A to USB-C, if necessary.
※Only USB-A and USB-C are supported for connection.
Scan the QR Code on the right to download the Liberator Control APP.
※The left/ middle/ right buttons of the gaming foodpedal corresponds to the left/ middle/ right buttons of mouse. Use the Liberator Control APP to make advanced settings, if needed
Or, you may go to http://download.msi.com/uti_exe/gaming-gear/MSI_Liberator_V2.zip to download the Liberator Control APP.
Find and click the “?” icon within Liberator Control APP to make Light Effects and Marco settings, and to get the detailed product instructions.
※Visit MSI official website at www.msi.com to get further information.
※This device should be operated under maximum ambient temperature of 45ºC.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and radiates radio frequency energy, and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the deler or an experienced radio/TV technician for help

NOTE

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Shield interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

EU compliance statement
MSI Inc. hereby declares that this wireless device is in compliance with
Directive 2014/53/EU.

ISED Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions: (1)This device may not cause
interference.(2)This device must accept any interference, including interference that
may cause undesired operation of the device.

MSI.COM

SUPPORT