GVM-SD600S Daylight LED Video Light User Manual

GVM-SD600S Daylight LED Video Light User Manual

PRODUCT INTRODUCTION

Welcome to “GVM-SD600S”, this product is specially designed for senior photography enthusiasts. The product is suitable for live streaming / outdoor Film and television shooting / studio photography, and also for YouTube  video shooting.

The main features of the product are:

1. The light can be adjusted steplessly, with one COB lamp bead, and a color rendering index of 97+, single color temperature 5600K,which helps restore and enrich the color of the object, providing you with natural and vivid shooting effects.
2. APP control can be controlled by your IOS and Android smart mobile devices; at the same time, GVM brand devices that support Bluetooth mesh networking can be used for group control.
3. With standard video interface, enables DMX control mode with low  accuracy 8bit and 16bit high accuracy.
4. With LCD display and stable control system, it supports 360° rotation,  which can effectively control the light. Equipped with a standard cover  after installation, the light is not easily dispersed, stable, natural, and  realistic, and the custom control fill light allows you to shoot the desired  results easily.
5. There are 2 lighting modes, DAYLIGHT mode, white light effect mode: DAYLIGHT mode: white light mode, you can adjust the light intensity.
   White light effect mode: This mode provides 8 white light modes: lightning, CCT cycle, candle, broken bulb, TV, paparazzi, explosion, breathing light.

We firmly believe that the correct use of this product will be of great help to your shooting work. It is strongly recommended that you read the following
user guide carefully before using the product.

USE AND SAVE

Do not place the product in high humidity, strong electromagnetic field, direct sunlight, high temperature environment. If the product is not to be used for a long time, disconnect the power supply.

Clean: Please unplug the power plug before cleaning. And use a damp cloth instead of any detergent or soluble liquid, so as not to damage the surface layer.

Power supply: Ensure that the power supply is within the scope of use, too high or too low will affect the work.

Maintenance: If there is a malfunction or performance degradation, please do not open the shell package by yourself, so as not to damage the machine and lose the right of maintenance. In the event of a malfunction, please feel free to contact us, and we will do our best to solve the problem.

Accessories: Please use the accessories provided by the manufacturer or approved accessory products in order to give full play to the best performance .

Warranty: Do not modify the product, otherwise the right to repair will be lost.

DISCLAIMERS

1. Before using this product, please read the instructions carefully and make sure to use the product correctly. Failure to follow and do not follow the instructions and warnings in this document may cause injury to you and the surrounding people, and even damage the product or other surrounding items.
2. Once you use this product, you are deemed to have carefully read the disclaimer and warning, understand and acknowledge all the terms and contents of this statement, and promise to take full responsibility for the use of this product and possible consequences.
3. Design and specifications are subject to change without notice.

PRODUCT PARAMETER

• Brand : GVM
• Product Name : Photography lights
• Product model : GVM-SD600S
• Product Type : Photography Fill Light
• Function / Feature : LCD screen,high CRI lamp beads, APP control,Master/Slave mode
• Lamp beads quantity : One COB lamp bead
• Color rendering index : ≥97
• Color Temperature :5600K
• Lumens: naked light : 24000lux/1m ; With standard cover: 129000lux/1m
• Light body weight : 3.8KG
• Controller weight : 2.3KG
• Lamp body size (mm) : 293×275×160
• Controller size (mm) : 164×180×298
• Light adjustment method : Stepless adjustment
• Power : 600W
• Voltage : AC:100-240V
• Power supply mode : power supply & battery (V port battery) Cooling : Forced cooling by fan.
• Product material : Aluminum alloy + plastic
• Commodity origin : Huizhou, China

PRODUCT STRUCTURE ICON

• Light
  
  

• Controller
  
  

INSTALLATION METHOD

• Loosen the rotating button of the lamp holder, install the lamp on the lamp holder as shown in the figure below, and then tighten the rotating button  of the lamp holder. power, and

• Loosen the angle lock handle, adjust the angle of the spotlight, and then tighten the angle lock handle.

• Insert the Baorong bayonet of the standard cover into the Baorong bayonet of the lamp, and then turn it clockwise to install the standard cover on the lamp. Push the Baorong disassembly buckle to the upper right and rotate the standard cover counterclockwise to disassemble the standard cover.
  

• Install the controller fixing clip on the light stand as shown in the figure below.
  

• As shown in the following steps, first install the controller on the controller fixing clip.
  

• Use the control wire to connect the light and the controller as shown in the steps below.
  

• There are two power supply modes to choose from:

  1. Connect the power cord and the controller for power supply.
  2. Purchase two suitable lithium batteries separately and use batteries for power supply（ . Batteries must be inserted in both battery slots to supply power, and the power is halved when using batteries.
     

• Power

• Battery installation slot
  

DESCRIPTION OF PRODUCT CONTROL KEYS

• Knob ①: INT/SELECTOR multi-function ording knob, press or rotate to adjust “selection/brightness”.
• Knob ②: RATE knob, which can adjust the rate of light effect change by rotating.
• Display: display current settings, modes and parameters
• Mode button: lighting mode switch button Menu button: word button to enter the
• setting menu Return button: press this button to return to the previous menu.
• Power ON/OFF button / cooling button: When the light is off, long press to turn on the light; when the light is on, long press to turn off the light, and start the large air volume to dissipate until the temperature drops to a touchable temperature.
  

FUNCTION INSTRUCTION & INSTRUCTION FOR USE

MENU： Press the MENU button to enter the menu setting page → turn the [knob①] to select an item → press [Knob①] Enter the project setting interface → Set the parameters of the project by pressing or turning [Knob①] → Press [BACK] to go to the previous menu.

DMX SETUP: Set DMX parameters, [address (001-512)] and mode [(8bit/16bit)] DIMMER CURVE: Set dimming [curve/linear/logarithm/exponential/S curve]. LIGHT FREQUENCY : Set dimming frequency, adjustment range [15KHz- 25KHz] BLUETOOTH RESET: Select [YES/NO] for Bluetooth reset operation
FAN MODE: Select cooling fan mode, [Auto/Quiet/High] DISPLAY SETUP: Set display backlight [Brightness (0~10)] and backlight display. mode [Always On/After 10s] ACTORY RESET: Select [YES/NO] to restore factory settings

DAYLIGHT MODE
By adjusting the light intensity of the white light to achieve DAYLIGHT the desired light effect. 100.0% Press the MODE key to switch to DAYLIGHT mode → turn [knob ①] to adjust brightness

WHITE EFFECT MODE

White light effect mode, 8 white light effect can be selected. Press [MODE] to switch to [WHITE EFFECT] mode → turn [knob①] to select the light effect type → press [knob①]   TO enter this type of adjustment -turn (Knob 1) adjust brightness, turn [knob②] to adjust the rate of change of the light effect .

APP CONTROL

APP download method

( Scan the QR Code On the Back of The manual to dowload The App)

Android version: official website QR code, Google
Play : Huawei store Etc
iOS Version : App Store

Reqister an Account

Use E-mail to register and log in (Figure 1); There may be a delay in sending the verification code, and the delivery speed depends on the Email server you are using;
Some E-mail servers may recognize our verification code Mail as advertising. Please check your blocked E-mail inbox.

Add device

1. Before adding a device, please make sure that you have turned on the Bluetooth and network data functions of your mobile phone, and reset the Bluetooth of the lighting device;

2. On the “My Devices” page, click the “Add Device button, search for nearby Bluetooth lighting  Device That Have Turn On and Select the Device that needs to be connected for network connection. (Figure 2)

   • The Android system needs to enable location permission to use Mesh technology to connect to the device. During this process, we will not collect any of your location information

Equipment management

1. After successfully adding your lighting equipment, your equipment will be displayed in The “My Equipment List” (Figure 3)

2. Click the device bar to enter the device control. (Figure 4)

SIMPIE FAULTS AND TROUBLESHOOTING

with the power plug.
②When using a lithium  battery to supply power, make sure that the battery does not have “low battery” protection.| Use the product after charging the battery.
After the APP enters to add a device, the Bluetooth of the device cannot be searched.| Check whether the device is normally turned on and whether it has been bound by another person’s connection.| Normal steps:① The mobile phone turns on the Bluetooth and network data functions, and the Android system needs to turn on the location permission;② Reset the device Bluetooth.
The App fails to connect to the network configuration of the device| Check whether the device is turned on  normally  and  whether it has been bound by another person’ s connection; check whether the Bluetooth  and network conditions of the mobile phone are good.| After resetting the device’ s Bluetooth and restarting the App, try to connect again.
The device cannot be searched after being removed from the App.| Whether to remove the device when the device is offline or when the network condition is not good.| After resetting the device’s Bluetooth, search and add the device again.
The device  in the APP cannot be clicked to enter the control| Check whether the device is online (displays a small green dot); if it is offline, follow the steps for network connection failure to check.| Restart the device, wait for 5 seconds, and it can be controlled when it is displayed as online; reset the device’s Bluetooth, and add the device to the device list again.

PACKING LIST

PRECAUTIONS

1. Please use the matching power adapter to power the product, and do not use non-original power adapters with different output voltage parameters to light up the product;
2. The product is not waterproof, please use it in a rain-proof environment;
3. The product is not anti-corrosion. Do not let the product come into contact with any corrosive Liquid.
4. When the product is in use, ensure that the product is placed firmly to prevent the product from being damaged by falling;
5. When the product is not used for a long time, please turn off the power of the product to save energy consumption.

QR Code

Web: www.gvmled.com
B &H: Email: bh@gvmled.com
GVM: Email: support@gvmled.com
Amazon: Email: amazonsupport@gvmled.com
Warehouse Add: 4301 N Delaware ave, unit D. PHILADELPHIA, PA19137, USA

References

• GVM Lights Official Store - Great Video Maker - Video Lights

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>