GVM-50RS RGB LED Panel Instruction Manual

GVM-50RS

PRODUCT INTRODUCTION

Welcome to “GVM-50RS”. This product is specially designed for senior photography enthusiasts. The product is suitable for live/outdoor/studio photography, and also for youtube video shooting. The main features of the product are:

1. step-less adjustable RGB color and dual color temperature feature, color range 3200K ~ 5600k, with 384 LED bulbs, which is helpful to restore and enrich the color of objects and provide you with natural and vivid shooting effect.
2. App intelligent control system, which can be controlled by your intelligent mobile device.
3. LCD screen display and stable system, which can support 360 ° rotation and effectively control the light Line. You can also install folding and external soft light board to avoid redundant light and make the light softer. You can customize the control of fill light, so that you can easily shoot the desired results.
4. The product can simulate 8 kinds of scene lights: Lightning, Police car, Candlelight, TV, Bad light bulb, Party, Disco, Paparazzi. We believe that once using our product correctly, you can make huge progress when shooting. Before using the product, you are strongly recommended to read the instructions below carefully.

DISCLAIMERS

1. Before using this product, please read the instructions carefully and make sure use the product correctly. If you don’t obey the instructions and warnings, you maybe cause harm to yourself and the people around, or even damage the product and other things around.
2. Once you use this product, you are deemed to have read the disclaimer and warning carefully, understand and acknowledge all the terms and contents of this statement, and promise to take full responsibility for the use of this product and possible consequences.

PRECAUTIONS

1. Please use the matching power adapter or lithium battery with the same specification to power the product. Do not use power adapter with different output voltage parameters.
2. The product is not waterproof, please use it in rainproof environment.
3. The product is not anti-corrosion, therefore do not let the product touch any corrosive liquid.
4. When using the product, make sure the product is put firmly and preventfrom falling and damage.
5. If the product will not be used for a long time, please switch off the power to reduce energy loss.

PRODUCT PARAMETER

• Brand: GVM
• Name: photography light
• Type: photography fill light
• Number: GVM-50RS
• Material: aluminum alloy
• Number of light beads: 384
• Color-rendering Index: 97
• Color Temperature : 3200K—5600K
• HUE: RGB 0°~360°
• Luminance: 6500lux/0.5m, 1600lux/1m
• Light adjustment method: Stepless adjustment
• Light angle of lamp bead: 120°
• Function / Feature: RGB, APP, Joint control, Special light, High color rendering index light beads
• Power: 50W
• Power Supply Mode: DC input & Battery
• Voltage: AC:100-240V
• Power specification: DC15V/4A
• Battery Capacity: 7.4V-4400mAh*2 ( to be purchased separately)
• Weight: 1.87KG Size ( mm ) : 310x320x55
• Cooling: Natural heat dissipation
• Origin: Huizhou, China

PRODUCT STRUCTURE ANALYSIS

INSTALLATION METHOD

1. The lamp can be installed and fixed on the bracket by rotating the knob clockwise, and unloaded by rotating in the counterclockwise direction.

2. Insert the Subdued light board from the top of the light panel.

3. Loosen the adjustment knobs on both sides of the U-bracket, adjust the angle of the panel you need, and then tighten the adjustment knobs on both sides of the U-bracket.

4. There are two power supply modes to choose. connect the power cord and adapter for power supply. purchase two other suitable lithium batteries and use them for power supply. ( both battery cells must be plugged in to power )

INSTALLATION OF FOLDING AND EXTERNAL MULBERRY PLATE

Light control folding (to be purchased separately): You can buy a set of light control folding to control the angle of light.
Install the hinge: align the front mounting hole with the screw hole of the hinge, and lock the door latch with the screw.

External soft-board (purchased separately): Make the light softer and achieve the effect of soft light box.

Install the external Diffuser: install the diffuser support frame to the lamp, align the diffuser with the screw hole, and lock the diffuser with the screw.

DESCRIPTION OF PRODUCT CONTROL KEYS

1. DC15V power input interface
2. Power switch
3. Mode button/WIFI reset button: Short press to switch mode, long press for 5 seconds to reset WIFI username and password.
4. Channel addition and subtraction key: Adjust channel
5. Brightness adjustment button: Adjust the brightness
6. Compound knob buttons: Adjust color temperature, hue, color purity and execute lightning mode
7. LCD screen: Display brightness, hue, saturation, color temperature, mode, channel value, and other data

FUNCTION INSTRUCTION & INSTRUCTION FOR USE

1. Mode selection
   Slight press the mode button to shift mode, the mode includes: Rotate, Master, Slave, WIFI, Special Light.
   MODE: Rotate: Adjust brightness, color temperature, hue and purity by rotating the knob.
   MODE: Master: Adjust brightness, color temperature, hue, and color purity by rotating the knob, and make the slave machines of the same channel also adjust synchronously.
   MODE: Slave: Only the channel can be adjusted. And the master and slave computers can be synchronously controlled by the master under the same channel.
   MODE: WIFI: Adjust brightness, color temperature, hue, and color purity through APP.
   Special Light: There are 8 kinds of scenes: Lightning, police car, Candle, TV, Bad Bulb, Party, Disco, Paparazzi. The brightness, color temperature, time and other parameters can be changing the addition and subtraction keys and adjusted by rotating the knob. (Note: The lightning mode is executed through the compound knob key. )

2. Adjust brightness (BRG): range 0%~100%
   • In master mode / rotate mode, the brightness can be adjusted by rotating the brightness level knob.
   • In WIFI mode, the color temperature can be adjusted by APP when connected to APP..

3. Adjust color temperature (CCT): range 3200K~5600K
   • In master mode / rotate mode, you can switch to CCT by pressing the compound knob button lightly, and then rotate the compound knob button to adjust the color temperature.
   • In WIFI mode, the color temperature can be adjusted by APP when connected to APP.

4. Adjust HUE: range 0° ~ 360°
   • In master mode / rotate mode, you can switch to HUE by pressing the compound knob button lightly, and then rotate the compound knob button to adjust the hue.
   • In WIFI mode, the color temperature can be adjusted by APP when connected to APP.

5. Adjust SAT: range 0%~100%
   • In master mode / rotate mode, you can switch to SAT by pressing the compound knob button lightly, and then rotate the compound knob button to adjust the color purity.
   • In WIFI mode, the color temperature can be adjusted by APP when connected to APP.

6. Adjust CH: range 0~11
   • In master mode / rotate mode, you can set the channel value by pressing the up/down key lightly.
   • In WIFI mode, the color temperature can be adjusted by APP when connected to APP.

7. APP control:
   The camera lamp switched to WIFI mode. The mobile phone connects the camera lamp via WIFI, and controls the brightness, color temperature, hue, color purity, on/off of the camera lamp via APP. If there is a slave, online control can also be performed via APP.

8. On-line control (Joint control between lamps and lanterns) :
   • You can prepare more than two photographing lights, set one to the master mode, set the rest to the slave mode, and set the channel (CH) of the master/slave by addition and subtraction button. When the channels of the master and the slave are the same, the brightness and color temperature, hue, color purity, and on/off of the slave in the same channel can be synchronously controlled by adjusting the brightness of the master and the composite knob.
   • You can prepare more than two photographing lights, set one to WIFI mode, set the rest to slave mode, and set the slave channel through the addition and subtraction button, so that when the WIFI mode machine is controlled through APP, the brightness and color temperature, hue, color purity, on/off of the slave of the same channel as the WIFI mode machine can be synchronously controlled.

APP CONNECTION AND APP CONTROL

Scan the QR code on the back of the manual to download the APP
First, press the mode key to switch the photography lights to WIFI mode. Open the “GVM Easily” APP on your mobile phone (the phone needs WIFI function at this time), register the APP account (as long as the email format is correct, the email account password can be entered at will, because the next time you open the APP, you will automatically login), and in the main interface of the application interface Switch devices in the menu — Select the device type as “RGB light”, and then set in the main menu of the APP interface, select “Switch WIFI”, select WIFI (WiFi initial user name: GVM_LED, password: gvm_admin) After the mobile phone is successfully connected to the photography lights WiFi “GVM_LED”.It returns to the APP main interface, “Connected” is displayed, indicating that the phone has successfully connected to the APP. At this time, you can use the brightness, hue, color purity, color temperature, channel, ON / OFF, and other control keys on the APP to control the brightness, hue, color purity, color temperature, channel value and ON / OFF.

If there is a slave, the slave of the same channel as the WIFI mode machine is controlled by the APP, and the current channel value can be changed by sliding the current channel value up and down.

WIFI username and password resetting
It is able to reset the WIFI username and password if long press the WIFI reset button for over 5 seconds. After resetting, the username and the password will return to the initial ( WIFI username: GVM_LED, WIFI password: gvm_admin ).

USE AND PRESERVATION

Do not put the product in a highly humid, strong electromagnetic field, direct sunlight, high-temperature environment. If not use the product for a long time, disconnect the power and take out the battery.

Clean: Before clean, disconnect the power plug. And use wet cloth rather than any detergent or soluble liquid, avoiding damaging the surface layer. Power: Make sure the power is in the demanded range, not too high or too low. Correctly load the battery, in order not the damage to machine. Repairing: If there is fault or performance degradation, do not unpack the shell by yourself, avoiding damage the machine and lose the right of maintenance. When there is a fault, do not hesitate to contact us, and we will do our best to deal with the problem.
Accessories: Please use the accessories provided by manufacturer and approved ones, in order to maximize the performance.
Guarantee: Do does not modify the product, or you will lose the right of maintenance.

SIMPIE FAULTS AND TROUBLESHOOTING

The switch
indicator
does not light up| 1. Check the matching power adapter indicator light up or not.| Make sure the adapter is well
contacted with the power plug.
2. When using lithium battery, make sure there’s no low power” protection.| Charge the battery before using it.
The brightness/
color temperature
knob is out of
control| Check if the mode were set as slave mode, lightness and color temperature of the products cannot be controlled in slave mode.| Pressthe”MODE”button for once, switch the mode from slave mode to master mode.
The product is in the “ON” state, the display and lights are not on| Check if the product is ‘OFF” because of the APP of the mobile phone.| Press the “ON/OFF” button once again.
APP can’t
connect / can’t
control| Check whether the WiFi is connected in WiFi mode, whether the WiFi is successfully connected, and whether “Connected” is displayed on the APP.| Normal steps:
1. Switch to WiFi mode after booting;
2. Successfully connect to WiFi;
3. Open the APP and the connection will be successful.
WiFi is
successfully connected, but the device cannot
connect to the APP| Check if the “Switch Device” type in the APP main menu is witched to “RGB Light”.| Click APP main menu. Switch devise. RGB light
Color cannot be adjusted| Check whether the color purity SAT value is too low or 0; the color purity value is 100, the color difference is most obvious.| 1. In the Master mode / Rotate mode, In the master mode/rotate mode, use the composite knob to increase the value of the color pure SAT;
2. Connect to APP in WIFI mode and increase the value of pure SAT through APR

PACKING LIST

|
---|---

https://gvmled.com/

|

https://www.facebook.com/GVMLED/

|

https://apps.apple.com/us/app/gvmeasily/id1428898824

|

https://gvmled.com/pages/gvmeasily

Web: www.gvmled.com
B&H Email: bh@gvmled.com
GVM Email: support@gvmled.com
Amazon Email: amazonsupport@gvmled.com
Warehouse Add: 4301 N Delaware ave, unit D. PHILADELPHIA, PA19137, USA

References

• GVM Lights Official Store - Great Video Maker - Video Lights

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>