KEW6305 Power Meter with 500A Current Sensors Instruction Manual
- June 9, 2024
- KEW
Table of Contents
KEW6305 Power Meter with 500A Current Sensors Instruction
KEW Windows for KEW6305
Installation Manual
This manual contains instructions how to install the software “KEW Windows for KEW6305” supplied with KEW6305.
Introduction
Interface
This instrument is equipped with USB and Bluetooth interfaces.
- Communication method: USB Ver2.0
- Bluetooth: Bluetooth Ver.5.0
- Compliant profile: GATT
The followings can be done by USB/ Bluetooth communication.
- Downloading files in the internal memory of the instrument to a PC
- Making settings for the instrument via a PC
- Displaying the measured results on a PC in graphic form in real-time,and also saving the measured data at the same time
System Requirements
- OS(Operation System) For the supported 0S, please check the version label on tne CD case or visit our nomepage.
- Display 1024 X 768 dots, 65536 colors or more
- HDD (Hard-disk space required) 1Gbyte or more (including Framework)
- NET Framework (4.6.1 or higher)
Trademark
- Windows is a registered trademark of Microsoft in the United States.
- Bluetooth is a registered trademark of Bluetooth SIG
The latest software is available for download from our homepage. www.kew-
ltd.co.Jp
KYORITSU ELECTRICAL INSTRUMENTS WORKs, LTD.
Installing the “KEW Windows for KEW6305”
-
The followings should be checked before installing this application.
- To prepare your system for installation, please close all open programs.
- Be sure NOT to connect the instrument to the PC until installation completes.
- Installation shall be done with Administrator right.
- To use KEW Windows for KEW6305, .NET Framework 4.6.1 or higher is required. If .NET
Framework 4.6.1 or higher is not installed in your PC, will be automatically installed when installing this application. Internet connection is required to install NET Framework 4.6.1 or higher.
-
Insert the CD-ROM in your PC’s CD-ROM drive.
Then the following pop-up will appear at the upper right on the screen. Left- click on this box.
-
Click and select “Run KEWSetupLauncher2.exe” when the following box appears. If User Account Control dialog bOX appears, click “Yes”
If neither (2) nor (3) appears, run “KEWSetupLauncher2. exe from the CD. -
Read through and understand the License Agreement and click “l accept , and then click “Next
-
Click “Next after entering the user information and other supplementary information, and click “Next” Ensure that internet connection is established, otherwise the installation of this application may be incomplete. )
-
Confim the information on installation, and then click “Install to start installation.
-
Click “Finish” when “InstallShield Wizard Complete dialog box appears.
The following box will appear if .NET Framework4.6.1 or higher is not installed in your PC
If a message requiring
restarting your PC is displayed, clickYesand restart your PC. Run
KEWSetupLauncher2.exe from the CD after restarting the PC. -
When the installation wizard completes, subsequent installation initiates automatically.
-
Repeat above step (4) through (7) and complete the installation.
How to un-install the PC Software:
Access to the “Control Panel” and double click on the “Programs and Features to remove the “KEW Windowsv2 and “KEW Windows for KEW6305.
Installing USB driver
- When KEW Windows for KEW6305 has been successfully installed in your computer, the following8 dialog box appears to start installing the USB driver. Click “Next
- Read through and understand the End User License Agreement and clickI accept, and then click Next
- If the following Security Warning message appears, click Install
- Installation completes when the following window appears. Click “Finish”.
The USB driver has been successfully installed. Power on KEW6305 first, and then connect to you PC.
To restart the interrupted USB driver installation process, right click on the CD drive and click “Open Click and start “kewusb102_setup.exe” in the “DRIVER folder.
Starting the “KEW Windows for KEW6305”
Click the “KEW WindowsV2” icon on your desktop. or click “Start” -> “Program”
-> “KEW” -> “KEW WindowsV2”. Ensure that KEW6305 gets started before
connecting KEW6305 to your PC. Then start KEW Windowsv2.
The main window for “KEW WNindowsV2” appears. Select “KEW6305 and click “Start
or double click on the “KEW6305” to get the KEW6305 started. Click “Close” or
close button (x) on the right-top to end the program.
KYORITSU ELECTRICAL INSTRUMENTS WORKS, LTD.
2-5-20,Nakane, Meguro-ku, Tokyo, 152-0031 Japan Phone: +81-3-3723-0131 Fax:
+81-3-3723-0152 Factory: Ehime,Japan www.kew-ltd.co.jp
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>