LEGGE 2204 991MF Mortice Lock Instruction Manual

LEGGE 2204 991MF Mortice Lock

Handing Guide

To Reverse Bolt

1. Remove outer forend.
2. Pull and rotate bolt 180° clockwise.

991MF Handing/Function Adjustment

V Series handing adjustment (Inside handle free)

To set for left hand
Push in and turn clockwise. Set adjuster as shown.
To set for right hand
Push in and turn anti-clockwise. Set adjuster as shown.
V9/V55
The Locking Bar must be down before installing.

To set for C Series (Both handles lockable)
Set adjuster as shown

Mortice Instructions

1. Cut mortice slot using template for correct size.
2. Fit lock into mortice, scribe around forend and remove wood to allow flush fit to door
3. Remove lock and use template to mark and drill holes to suit lock and furniture being used.

Customer Support

Allegion (Australia) Pty Ltd
Phone 1800 098 094
Websitewww.allegion.com.au

Allegion (New Zealand) Limited
Phone 0800 477 869
Websitewww.allegion.co.nz

References

• Allegion NZ Homepage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>