RCTSB3B RCA Smart Remote App User Guide
- June 9, 2024
- RCA
Table of Contents
RCTSB3B Smart Remote App
User Guide
RCTSB3B RCA Smart Remote App
LET’S GET STARTED!
Para ver las instrucciones en español, consulte el reverso de esta hoja.
-
Charge the remote
Plug the charging cable into the charging jack on the back/ bottom of the remote.
Plug the other end into a USB power source. The red charging indicator illuminates. The green indicator illuminates when the remote is fully charged. -
Install the App on your phone
In the Google Play or Apple App Stores, search for “RCA Smart Remote” and look for the icon shown here. Then download and install the App.
https://onelink.to/69fxy3
NOTE: You can also scan the QR code here with your phone to go directly to the App for your device. -
Launch the App and follow the guided setup
Once the RCA Smart Remote App has installed on your smartphone, press the icon to launch the App.
The RCA Smart Remote App will lead you through the steps to set up your remote to control your TV, streaming device, and soundbar.
How to use the Find-Me feature
Open the RCA Smart Remote App and press the icon next to your remote’s name.
The remote will begin to beep.
IMPORTANT: The remote must be in range of your phone and connected via
Bluetooth in order for the Find-Me feature to work.
Smart Remote Troubleshooting
Try one of the following solutions if you ever have problems using the Smart Remote.
- Make sure the remote is in the correct mode by pressing the corresponding device key ( for TV or for a streaming player). This tells the remote which device to operate. • Make sure the remote is charged. Insert the charging cable into the charging port on the bottom of the remote. Plug the other end of the cable into a USB power source, like a computer or USB adapter (not included). The red indicator on the back of the remote illuminates while the remote is charging. The green indicator turns on when the remote is fully charged.
- The shortcut keys mimic the functionality of your device’s original remote — for example, if the original remote that came with your SmartTV doesn’t have a YouTube key, chances are this remote’s YouTube key will not automatically give you direct access to YouTube on your SmartTV.
- You can reset the remote if it seems to be locked up. Find the reset port on the back of the remote, toward the top and in the middle of the back. Unbend a paper clip and insert it into this hole until you reach the reset button on the inside of the remote. Press for 2-3 seconds to reset the remote. You will need to recharge the remote and set it up in the App again.
For more information, including instructional videos and
customer support,
visitwww.RCASmartRemote.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>