COOKING PERFORMANCE GROUP 351030208 Retrofit Thermostat Instructions
- June 9, 2024
- COOKING PERFORMANCE GROUP
Table of Contents
COOKING PERFORMANCE GROUP 351030208 Retrofit Thermostat
Thermostat replacement
-
Turn off oven and disconnect from power supply
-
Remove knob from thermostat dial (Fig. 1)
-
Remove lower front cover, under the doors, by open-ing the doors and removing screws
-
Remove right side panel by removing screws along the back edge of the panel and in the lower right front corner (Fig. 3)
-
Remove Phillips screws holding thermostat to control panel
-
Remove wiring from thermostat, note locations as they are similar to new replacement thermostat (Fig. 2)
-
Remove existing thermostat probe by removing Phillips screws from mount and pull towards you (Fig. 4)
New thermostat = 351030208
New thermostat probe = 351170069
New bracket = 351150756
Temperature dial sticker = 351124365 -
Install new thermostat onto new bracket with Phil-lips head screws from old thermostat mounting locations. Note orientation of bracket and thermo-stat (Fig. 5)
-
Install wiring onto new thermostat, ensure locations are correct for power supply, same as old thermostat (Fig. 6 & 7)
-
Install new thermostat probe wiring onto new ther-mostat (Fig. 7)
-
New thermostat probe is installed the same as the old thermostat probe
-
Place new temperature dial sticker onto the front of the control panel, reference the 3 holes for alignment
-
Install new thermostat to control panel with Phillips screws (Fig. 8)
-
Install knob onto thermostat dial post. Note, you may have to hold the back side of the thermostat to fully seat the knob on the dial post