WISYCOM MTP60 Multi-Band Bodypack Transmitters User Guide
- June 8, 2024
- WISYCOM
Table of Contents
WISYCOM MTP60 Multi-Band Bodypack Transmitters
Main Accessories
(for an updated and exhaustive list look into wisycom web)
MPRLBP: rechargeable Lithium-ion battery 1500 mAh 3,7V/5,55 Wh Cameron Sino part number: CS-WMR500SL
ACMMTP: battery charger capable of charging up to 4 MTP60 simultaneously
PHA48: Plug on for XLR 3 adapter capable of providing +48V Phantom power
CAL48: Cable to connect an MTP60/40S to a PHA48 to use microphone with Phantom
PHA60: XLR3 power with 12/18/48V Phantom with lemo connector for Tx connection
and hooks for easy pole attachment
CAD30: Cable adapter, with AF male connector and 1 + 1 female connectors (for
MIC and PTT button)
BCL60: spring loaded belt clip
BCLW60: wire belt clip reversible
Conformity
RADIO Directive 2014/53/ EU Radio Equipment Directive (RED)
|
FCC-ID: POUMTP60
---|---
|
IC IC: 11967A-MTP60
(*)The Wisycom microphone pocket transmitter model MTP60 complies with the
following requirements:
FCC (Federal Communications Commission) Part 74. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may
cause undesired operations. Changes or modification not ex- pressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment. FCC ID can be found inside the battery compartment.
This device complies with Industry Canada license-exempt RSS-123 and RSS-210 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the de- vice. This radio transmitter IC: 11967A-MTP60 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device
Antenna types (50 Ohm impedance, max gain 2.1dBi):AWF30-B1-507: band 470 – 547
MHz, AWF30- B1-590: band 547 – 663 MHz, AWF30-B8-950: band 940 – 960 MHz.
This equipment complies has been evaluated for and shown compliant with the
FCC and ISED RF Expo- sure limits. The unit of measurement for RF exposure is
Specific Absorption Rate (SAR). The FCC SAR limits for is 1.6W/Kg per 1g of
tissue The maximum SAR levels tested has been shown to be 1.2 W/kg at head
with 0mm of separation distance from the body This device operates on a no-
interference, no-protection basis. Should the user seek to obtain protection
from other radio services operating in the same TV bands, a radio license is
required. For further details, consult Innovation, Science and Economic
development Canada’s Client Procedures Circular CPC-2-1- 28, Voluntary
Licensing of License-Exempt Wireless Microphones in TV Bands.
REMOTE CONTROLS
| Mic Mode | Pinout |
|---|---|
| 2 W | 1 = GND / 3 = AF |
| 2 W+B | 1 = GND / 3 = AF+5,5 V |
| 3 W | 1 = GND / 2 = 5,5 V / 3 = AF |
| 2 W & P | 1 = GND / 2 = 3,1 V Ph / 3 = AF |
| 2 W+B & P | 1 = GND / 2 = 3,1 V Ph / 3 = AF + 5,5 V |
| INSTRUMENT | 1 = GND / 3 = AF (High impedance) |
| Label | Code |
| --- | --- |
| 507 | AWF30-B1-507 |
| 590 | AWF30-B1-590 |
| 552 | AWF30-B3-552 |
| 646 | AWF30-B3-646 |
| 710 | AWF30-710 |
| 796 | AWF30S-796 |
| 808 | AWF30-BP-808 |
| 950 | AWF30-B8-950 |
| 1K1 | AWF30-B6-1K1 |
Download Documentation and Firmware
Get latest user manual, tips, specifications, firmware & software on the
download page:
wisycom.com/products/d/MTP60
Product Registration and Warranty
Register your product to extend your warranty and receive update on latest
firmware:
wisycom.com/registration
Keep up with Wisycom online
Follow us on Facebook and Instagram. You can also subscribe on Youtube for
more.
wisycom.com/social
This guide is intended to assist you with initial quick setup and operation of
your Wisycom product.
You can refer to Wisycom Autorized Distributors for technical Support and
information about service and repairs available in your area or contact us
directly by email.
WISYCOM ITALY
Via Tiepolo 7/E 35019 Tombolo (PD) – ITALY
WISYCOM USA
5228 Eisenhower Avenue Alexandria, VA 22304 – USA
+39 0424 382605
+1 (888) WISYCOM
+1 888-947-9266
0424 382605
****support@wisycom.com
sales@wisycom.com
support@wisycomusa.com
sales@wisycomusa.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>