HAMPTON BAY LT2204304GW-WH LED Table Lamp User Manual
- June 9, 2024
- HAMPTON BAY
Table of Contents
ITEM #: 000 000
MODEL#: LT2204304GW-BK LT2204304GW-W H
USE AND CARE GUIDE
LED table lamp
LT2204304GW-WH LED Table Lamp
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through
the purchase of this light fixture. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your home improvement needs. Thank you for choosing
Hampton Bay!
Safety / Security Information
For your safety, please read carefully and fully understand the information
provided in this manual before using the lamp. Failure to do so may result in
electric shock, fire or other dangerous or even fatal injuries.
This device contains licence-exempt transmitters)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions: 1.This device may not
cause interference. 2.This device must accept any interference, including
interference that may cause undesired operation of the device. This equipment
should be installed and operated with a minumum distance of 10 cm between the
radiator and your body.
Specification parameter
Adapter input: 100-240V — 50/60Hz, 0.5A.
Output: 5Vdc, 3A 15W Lamp input: 5VDC, 1.2A
6W. Wireless charge and output: 5Vdc, 1.0A 5W
A minimum distance of 0.2m must be kept between the lamp cap and any lighting
object.
Operating instructions of lamps
- Connect the connector behind the adapter lamp.
- Touch the switch button, touch the lamp on, and touch the lamp off again.
- Five-gear color temperature adjustment button, the default value is 3000k, touch 3500k once, touch 4000k again, touch 5000k again, and touch 6500k again.
- Touch the power-off touch key once, turn off the lights for 0.5H, and the green indicator lights up. Touch it again for 1H to turn off the lights, while the blue indicator lights up, and then touch the power-off button again.
- Brightness level touch bar, 50% on by default, 10% at the lowest touch, and gradually brighten to 100% by sliding from left to right. Any color temperature segment can be dimmed by touch bar.
- Wireless charging area, the phone can be charged when placed in the center.
- The angle adjustment range of the lamp is as shown in the figure (excessive adjustment of the movable joint will cause product damage).
Instructions for use and care of lamps and lanterns
- Lamps and lanterns are only used indoors.
- Keep it out of the reach of young children and pets.
- Before cleaning the lamps and lanterns, it is necessary to disconnect the power supply, carefully wipe or remove dust with a dry and soft cloth, or wipe the outer surface of the lamps and lanterns with a slightly damp cleaning cloth (do not use any detergent containing chemicals, solvents or irritants).
- When the lamp is working, the lamp head will heat up, which is a normal phenomenon.
- If you don’t use the lamp for a long time, disconnect the power adapter from the socket.
- Replace the light source for non-users.
- Lamps can only be repaired by qualified technicians according to standards/specifications.
- Please use the adapter provided by our company; Using adapters from other manufacturers may damage the lamps or cause personal injury.
- If the lamp, wire or plug is damaged, please do not operate the lamp and send it to the service center for repair.
- If the lamp falls into the water, please send it to the service center for repair.
- Do not use lamps in flammable and explosive places.
Common troubleshooting
Fault phenomenon 1. Lamps can’t light up.
Treatment method: First check whether the connection points between the
adapter and the lamp and the power socket are in good contact. If it is in
poor contact, reconnect it. Fault 2. Lamps can’t charge mobile phones.
Treatment: Check whether the mobile phone and the wireless charging logo
are in the same position, if not, re-adjust the mobile phone position. Fault
phenomenon 3. Switch failure or disorder of lamps and lanterns keys.
Treatment: If the control panel is damaged, contact our local service
personnel for repair. Activate Windows Go to Settings to activa
After-sale protection
- Warranty commitment: the detailed rules in the Three Guarantees Regulations promulgated by relevant state departments shall apply. If the product itself has quality problems, the whole machine will be guaranteed for 3 years free of charge with the warranty card from the date of purchase by the user.
- The following situations are not covered by the free warranty ”
- Failure to use, maintain and keep the product according to the requirements of the product instructions, resulting in failure or damage.
- can’t produce a valid warranty card and proof of purchase.
- Damage caused by connecting the power supply with inappropriate voltage or refitting accessories.
- Products that have exceeded the specified warranty period.
- The warranty card will not be guaranteed after alteration.
- Please properly package and transport the products sent for repair. If there is any damage or loss in the process of transportation, our company will not pay any responsibility.
FCC Warning
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could voidthe user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residentiainstallation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used inaccordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does causeharmful interference to
radio or television reception, which can be determined by turning the
eduipment off and on.the useris encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.
Questions, problems, missing parts?
Before returning to the strore, call Hampton Bay Customer Service 8 a.m. –
7 p.m.,
EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this mania) for future use
Documents / Resources
|
HAMPTON BAY LT2204304GW-WH LED Table
Lamp
[pdf] User Manual
LT2204304GW, 2AP9S-LT2204304GW, 2AP9SLT2204304GW, LT2204304GW-WH LED Table
Lamp, LT2204304GW-WH, LED Table Lamp, Table Lamp, Lamp
---|---