MIYOTA Caliber 9019 Watch Instruction Manual
- June 9, 2024
- MIYOTA
Table of Contents
MIYOTA Caliber 9019 Watch
DISPLAYS AND BUTTONS
WINDING THE MAINSPRING
Automatic winding watch can also be hand winded by turning the crown clockwise
in Normal position.
Wind several times clockwise. It will start to move naturally.
SETTING THE TIME
- Pull the crown out to the 2nd Click Position so that the second hand stops at (0) position.
- Turn the crown to set hour and minute hands.
- After the time has been set, push the crown back to the Normal position.
SETTING THE DATE
- Pull the crown out to the 1st Click Position.
- Turn the crown clockwise to set the date.
- If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day. 3. After the date has been set, push the crown back to the normal position.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>