ISOtunes LANDSCAPER Electronic Earmuffs with Bluetooth User Manual

: June 9, 2024
: ISOtunes

ISOtunes LANDSCAPER Electronic Earmuffs with Bluetooth

ISOtunes LANDSCAPER Electronic Earmuffs with Bluetooth

Location of Controls

Power Button
Volume Up Button
Volume Down Button
Multifunction Button (MFB)
LED Indicator Light
Line Input
Charging Port

Power On/Off

Power On: Press and hold the power button (1) (you will hear “Power On”)

Power Off: Press and hold the power button (1) (you will hear “Power Off”)

Bluetooth Pairing

Press and hold the Multifunction Button (4) to enable Bluetooth. You will hear “Bluetooth On” and the headphones will automatically enter Pairing Mode.

Open the Bluetooth settings on your device

Search for “ISOtunes LANDSCAPER.” Pair and connect. You will hear “Bluetooth Connected” once connected.

Bluetooth Reset

Press and hold the Multifunction Button (4) for ten seconds. The Bluetooth LED (5) will flash quickly eight times if successful.

Music & Volume

Play/Pause: Short Single Press MFB (4)
Next Track: Short Double Press MFB (4)
Previous Track: Short Triple Press MFB (4)
Volume Up: Press + button (2)
Volume Down: Press – button (3)

Line Input Option
To listen to music via the line input (6), use the 3.5mm audio cable included. Insert one end into the ISOtunes LANDSCAPER and insert the other end into your phone or other personal media device. Will not work for phone calls with line input.

Phone Calls

Answer Call: Short Press MFB (4)
End Call: Long Press MFB (4)
Reject Call: Press and hold MFB (4)
Mute/Unmute Microphone: Short Press MFB (4)

Charging

This product is charged with a micro-USB charger and hold up to 40 hours of music and talk time between charges.

Charge the ISOtunes LANDSCAPER by plugging the included micro-USB cable into the product and a USB Port (6). The built in battery will charge, as indicated by a solid blue light. The light will turn off once charging is complete.

LED Indicator Light (5)

Solid Red = Charging (Cable Plugged In)
No Light = Fully Charged (Cable Plugged In)

Only charge your ISOtunes LANDSCAPER with a maximum 5 Volt charger. Using a charger higher than 5 Volts could be dangerous and may damage your ISOtunes LANDSCAPER product. Be especially careful with “quick charge” or “turbo charge” chargers, which often supply 9, 12, or 15 Volts.

LEGALITIES

Fitting

Frequency, Hz| 125| 250| 500| 1000| 2000| 3150| 4000| 6300| 8000| NRR
---|---|---|---|---|---|---|---|---|---|---
Grand Mean Attenuation, dB| 16.0| 18.8| 26.1| 32.5| 35.3| 39.6| 43.0| 41.6| 40.6| 24
Standard Deviation, dB| 2.4| 1.9| 2.3| 2.2| 2.5| 3.6| 4.0| 4.5| 3.8

Bluetooth® Input

Requirement:	Result
The maximum sound pressure level	73.9 dB(A) at -10 dBFS

Important
Please read, understand, and follow all safety information.

Full manual can be found at
ISOtunes.com/manuals

Fitting

Pull the earcups apart
Place the product on your head
Adjust the earcup position by extending the headband to ensure a good fit around the ears

Introduction

Thank you for purchasing ISOtunes® LANDSCAPER professional noise isolating headphones. These headphones have been specifically designed for use in noisy environments – allowing you to block out much of the surrounding noise so that you can listen to your music or talk on the phone with less interruption.

Noise Attenuation APPROVAL

This product has been tested to the European Safety Standard EN 352-1:2020 and the ANSI S3.19-1974 standard for a hearing protector, with a Single Number Rating (SNR) of 30 dB and a Noise Reduction Rating (NRR) of 24 dB. Full testing details are available in the Noise Attenuation section of this booklet.

ANSI S3.19-1974

The level of noise entering a person’s ear, when ISOtunes® LANDSCAPER headphones are worn as directed, is closely approximated by the difference between the A-weighted environmental noise level and the Noise Reduction Rating (NRR). Improper fit of this device will reduce its effectiveness in attenuating noise. Consult the enclosed instructions for proper fitting.

A1: Frequency (Hz)
A2: Mean Attenuation (dB)
A3: Standard Deviation (dB)

Example:

The surrounding noise level measured at the ear is 100 dB.
The NRR of ISOtunes® LANDSCAPER is 24 dB.
The noise level entering the ear is approximately equal to 76dB.

Please note that the NRR is based on the attenuation of continuous noise and may not be an accurate indicator of the protection attainable against impulsive noise, such as gunfire.

SafeMax™ Technology

ISOtunes® LANDSCAPER incorporates SafeMax™ Technology, therefore its volume output has been limited to 85 decibels (IT-33). ISOtunes® devices with SafeMax™ Technology are OSHA, and ANSI compliant.

Cleaning and Maintenance

Clean your ISOtunes LANDSCAPER by gently wiping them with a clean, damp cloth with mild soap.
Do not immerse the hearing protector in water.
Do not use abrasive cleaning solvents to clean the hearing protector.

If the hearing protector gets wet from sweat or rain, please discontinue use and turn the earmuff outwards and allow to dry.

The ear cushions and foam liners should be regularly inspected for deterioration, cracking, or other damage.

WARNINGS
ISOtunes® LANDSCAPER does an excellent job of blocking outside noise. As such, ISOtunes® LANDSCAPER should NOT be used in environments where users need to be fully aware of their surroundings for personal safety reasons. For example, do NOT use them while driving a car or riding a motorcycle. Similarly, do NOT use them when riding a bicycle outside. The user is solely responsible for ensuring that ISOtunes® LANDSCAPER is used ONLYin safe environments.

These earmuffs are intended to protect your ears against hazard noise.

The audibility of warning signals at a specific workplace may be impaired while using the entertainment facility.

This product may be adversely affected by certain chemical substances, such as sunscreen and bugspray. Further information may be sought from the manufacturer.

The fitting of hygiene covers to the cushions may affect the acoustic performance of the ear-muffs.

Recommendations

The wearer should ensure the product is properly cleaned and dry before and after use. Storage should be in a clean and dry location between -20 °C and 50 °C. The battery should not be fully discharged before long term storage.

The wearer should ensure that:

The hearing protector is fitted, adjusted, and maintained in accordance with the manufacturer’s instructions.
The hearing protector is worn at all times in noisy surroundings.
The hearing protector is regularly inspected for serviceability

If these recommendations are not adhered to, the protection afforded by the hearing protector will be severely impaired.

The size range for the earmuff is S M L.

The mean mass of the product is 327.6g. Date of Obsolescence: 3 years from purchase date.

Not to be used in Explosive Atmospheres.

Additional Notes

The hearing protector is equipped with a safety-related audio input. The user should familiarize themselves with its operation prior to use.

The user should verify proper operation prior to use. If distortion or failure is detected, the user should follow the manufacturer’s recommendations for maintenance and battery replacement.

Warning: the output level of the audio circuit of this hearing protector may exceed the exposure limit.

Charge the built in lithium ion battery with the included charging cable.

Battery level can be checked via the bluetooth batter meter on a smartphone.

ISOtunes® LANDSCAPER is compliant with Bluetooth® V5. We do not guarantee compatibility of all functions on every Bluetooth®- enabled device. Please check your device’s user manual for compatibility and functionality.

Materials:

Ear Cushion: PU + Memory Foam
Casing: ABS
Key Pad: Silicone
Headband: Stainless Steel and PU
Headband Bracket: ABS

For additional information or questions about ISOtunes® products or spares and accessories, please contact our support team.

Please note, the hearing protector provides an entertainment audio facility. The earmuff provides audio signal sound pressure level limitation which limits the entertainment audio signal to 85 dB(A) for effective to the ear. This limit is maintained for bluetooth signal inputs which are standard to the Bluetooth A2DP, HFP, and HSP specifications. There is an analog line input on this product. For additional information about ISOtunes® LANDSCAPER, please visit ISOtunes.com/manuals. For additional information or questions about ISOtunes® products or spares and accessories, please contact our support team.

Replacement Parts: Hygiene Kit (ear-cushions and foam inserts) Model Number: IT-86

Replace ear-cushions.

Put your finger between the ear cushions and the earcup rim.
Pull the Foam Ear cushion away from the earcup rim.
Insert the new ear-cushion in place on the earcup rim.

FCC

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the users’ authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC‘s RF radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

North America
support@isotunesaudio.com
1-844-396-3737
Monday-Friday 9-5 ET

UK & Europe
uk-eurosupport@isotunesaudio.com

EU Importeur
Haven Technologies UK LTD
Winterhuder Weg 29
22075 Hamburg
Germany

ISOtunes Logo