MIYOTA 6T51 Mechanical Movement Instruction Manual

MIYOTA 6T51 Mechanical Movement

INSTALLATION INSTRUCTION

A)DISPLAY

• Date & Day of the week position may be located at different positions depends on models.

B) SETTING THE TIME

1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, the second hand begins to run.

C) SETTING THE DATE

1. Pull the crown out to the 1st position.
2. Pull the crown from the 1st position to the 2nd position, then the date advances one day.
3. After the date has been set, push the crown back to its normal position.

D) SETTING THE DATE OF THE WEEK

1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the day of the week.
3. If the date is set between the hours of around 9:00 PM and 1:00 AM, the day of the week may not change the following day.
4. After the day of the week has been set, push the crown back to the normal position.

• These specifications might be changed without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>