campgo Logi Compact Camping Stove User Manual

: June 9, 2024
: campgo

Table of Contents

campgo Logi Compact Camping Stove
Introduction
Technical Data
Assembly
Operating Instructions
Fuel Canisters
Maintenance and Repair
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

campgo Logi Compact Camping Stove

Introduction

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Technical Data

campgo Logi Compact Camping Stove 1

Warnings

All stoves can produce Carbon Monoxide which may cause death, so do NOT use this product in an enclosed space such as tent, car, home or other similar spaces. For outdoor use only.
If you smell gas or hear has leaking before opening the flame control, please check that the valve is fully closed (clockwise) and that the fuel canister is screwed completely to the burner.
If this problem continues, do not light the stove. Extinguish any open flame and disconnect from fuel supply. Allow gas to dissipate five minutes before relighting the appliance.
Failure to follow these instructions could result in fire or explosion, which could cause property damage, personal injury, or death.
Change fuel canisters in well-ventilated, flame-free areas.
Do not use any heat exchanger pot from different brands, as an alternative design may cause the stove to overheat and potentially explode.
Do not move or lift the system and leave it unattended while the burner is lit.
This product does not come with fuel canister.
Not all fuel canisters are made equal as they have slightly different valve specifications. Most fuel canisters work perfectly on this stove.
If you find that some fuel canister doesn’t working (normally unable to ignite the stove), please use a different brand, or view information stated on the product page on the Alza website.
Strictly follow the following steps in this user guide.
This gas stove is for cooking purposes only. Do not use it for other purposes, otherwise damage or fire may result from heating.
Do not use the gas stove for purposes other than those intended, such as drying clothes or using it as a heat source.
Do not touch the gas stove when using it. It takes time to cool down the stove, do not touch it until it has cooled down completely. Be sure to store the gas stove out of the reach of children.
After the gas stove is ignited, no body parts such as hands or face should approach the burner.

General Warnings

This gas stove is for cooking purpose only.
Do not use it for other purposes, otherwise damage or fire may result from heating.
Do not use the gas stove for purposes other than those intended, such as drying clothes or using it as a heat source.
The appliances are for outdoor use only, it can only be used in a well-ventilated area in accordance with national or local requirements.

Warning About Burns

Do not touch the gas stove when using it. It takes time to cool down the stove, do not touch it until it has cooled down completely.
Be sure to store the gas stove out of the reach of children.
After the gas stove is ignited, no body parts such as hands or face should approach the burner.

Assembly

```
* Remove the plastic cap off the gas tank, hold the gas valve and turn the threaded section of the gas tank carefully clockwise. A little bit of gas will be spilled, but do not turn it too firmly or the gas valve will be damaged.
```
- Turn the flame adjustment knob counter-clockwise to emit a small quantity of gas. Start the fire with a lighter.
- Align the notch (pot body) indicated by the yellow arrow with the bump (stove), press it down and rotate it clockwise until it doesn’t move.
- Add water or food and turn the switch counter-clockwise to turn on the stove.

Operating Instructions

Take out the lid and stove burner from the pot.
Make sure the control valve is closed – fully turned to the right (clockwise).
Connect burner to the fuel canister. Hold the canister and screw the burner clockwise until burner is securely tightened.
When screwing, it is normal that the gas slightly leaks. Screw it as soon as possible.
Before ignition, please do not turn the control valve to Max as too much gas flow will take the heat generated from the piezo igniter causing unsuccessful ignition.
Turn the control valve to Mid or Low level by turning the knob anti-clockwise, and then press the push-button igniter to ignite.
Keep yourself some distance away from the burner during ignition. Light stove in a well-ventilated area only.
Place the pot on the burner using handles and make sure it is securely locked on the burner with locking lugs.
Add liquid or food into the pot. Do not fill over the safe level line indicated on the side of the pot.
Use handles to support pot when removing the lid or removing the pot from the burner.
Turn the flame control fully clockwise after use.
Be careful that the pot and burner will be hot after use. Leave them to cool down before packaging.
Remove the canister from the burner.
Store all parts in a cool and dry space.

Fuel Canisters

Applicable fuel canisters are of butane-propane mixture. The use of other types of fuel canister may be dangerous. This appliance can only be used with disposable fuel canister filled with butane-propane mixture at regular atmospheric pressure with international standard threads and valves in the centre tab as required by EN417

Finding gas leakage

A gas leak is essentially caused by two things, one is caused by an incorrect connection between the canister and the cooker, the other is caused by a faulty cooker.
After connecting the gas canister, fill some clean water around the mouth of the gas canister. If you find bubbles, there is an incorrect connection.
If you find that the inside of the stove is still burning after you turn off the switch, it means that the cooker is defective.

Removing LPG fuel canister

Before unscrewing the LPG canister, check that the burner is off.
Turn the control knob clockwise and tighten it to make sure the flame is extinguished, and no other flame is nearby.
Allow the gas cooker to cool completely. Hold the gas valve firmly and then turn clockwise to remove the LPG fuel canister.
The LPG fuel canister must be removed from the gas cooker before storing them separately.
If the gas is about to run out, check that the LPG fuel canister is empty before discarding it (shake the canister and listen for the sound to see if it is empty). The storage area must be dry and cool.
The gas cartridge or gas cylinder must be changed in a well-ventilated place, preferably outdoors, away from any sources of ignition such as open flames, piles, electric fires and away from other persons

Safety Tips

The gas stove uses flammable fuel which, if not operated properly, can cause a hazard to the user and surrounding property.
Before using the gas cooker, make sure that you fully understand the operating instructions in this manual.
Test its operation and learn the correct method before starting outdoor activities.
The gas cooker is designed for outdoor use.
During use, the gas cooker absorbs oxygen and releases carbon dioxide; there is a risk of carbon monoxide poisoning when used in an unventilated environment or in a tent.
Before lighting the gas cooker, check for gas leaks. If there is a gas leak, the safest way is to unload the gas cooker.
Do not use a gas stove with a gas leak.
When using a gas stove, do not cover the stove with windscreen, stones, or other objects.
Do not expose it to other burning gas stoves, open flames, or other heat sources.
Overheating the gas stove will not only damage the appliance but will also endanger the safety of the user.
Do not use the gas cooker in any combustible environment.
When using this appliance, clothing, sleeping bags and other combustible items should be kept within one metre of the flame emission of the burner (including the area above it).
Ensure that the face and other parts of the body are well away from the top of the flame.
The appliance must be operated on a level surface and not moved, rocked or tilted during operation.
A flash fire phenomenon that may occur during heating or when the appliance is moved.
Although the load capacity of the product is 20 kg, do not leave an empty pot on the stove for a long period of time as this could damage it and create a risk.
Do not leave the gas cooker unattended during use. Please keep it out of the reach of children. Use of this appliance by minors is prohibited.
Do not use an appliance if it has a damaged or worn gasket; do not use an appliance that is leaking, damaged or that is not working properly.
Do not use an appliance if it has damaged or worn seals; Do not use an appliance that is leaking, damaged or that is not working properly.
Before disconnecting the gas cartridge or gas cylinder, check that the burners are extinguished.
The appliance must be used away from combustible materials and information on a minimum distance of 1 m from adjacent surfaces (wall, ceiling).

Disclaimer

Do not use this appliance if the O-ring is damaged or worn. Do not use leaking or damaged appliance.
Do not attempt any maintenance, disassembly or repair that is not described in this manual. If you have any questions about this product, please consult our customer service specialists.
This appliance can only be used on non-flammable surfaces. When using outdoors, keep it at least one meter away from trees.
Check that seals (between the appliance and the gas cartridge or gas cylinder) are in place and in a good condition before connecting to the gas cartridge or gas cylinder.

Maintenance and Repair

the air pressure drops, the gas cannot be ignited. Check if there is gas in the LPG canister, if so, the burner opening may be blocked. Wipe off any dirt on the burner with a cloth soaked in methanol. The burner can be cleaned by blowing air into the hole on the burner. Do not use unqualified perforating pins or other pins to clean a blocked hole as this could damage the hole and make the appliance unsafe. After using the gas stove, clean the burner and stove surface. If any repair is needed, please send the appliance to the seller or straight to the manufacturer: NINGBO GOMONT LEISURE CO., LTD, address: ROOM 428, NO. 2, NO.1, BUILDING 1, CHAOYANGHUI, XIAYING STREET, YINZHOU DISTRICT, NINGBO, ZHEJIANG, telephone: +0086 0574 87117750

Daily Maintenance
Check that the O-ring is correctly positioned and in good condition. Inspect the part before assembling the appliance. If the O-ring is damaged or worn, replace it in a timely manner. Your local distributor can provide you with a new O-ring. If you have difficulty obtaining replacement parts or accessories, contact your online retailer.

Environment during use

Do not use this gas cooker in enclosed areas such as tents, cars, RVs or indoors. The gas cooker may produce carbon monoxide, which is odourless and can be fatal.
Be sure to use the gas stove on a level and firm surface. Avoid direct sunlight and use it in a cool place.
Do not use this gas stove near a heat source or open flame. The heat generated by the heat source and open flame will raise the temperature of the LPG fuel canister, which may cause it to explode.
Do not connect a remote gas source (household natural gas) to the appliance.

Ventilation

Always use this gas stove in a well-ventilated area.
Do not use this gas stove in an enclosed area.

Warranty

Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.