SIIG 200W GaN PD Charger with Charging Display User Guide

: June 9, 2024
: SIIG

Table of Contents

Features
Package contents
Layout
Multiport Charging Rules
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

200W GaN PD Charger with Charging Display
User Guide

Features

New Gallium Nitride (GaN) semiconductor material
Supports AC input 100-240V, 50/60Hz, 3A
4 ports total output 200W max
USB-C ports supports PD 3.0, PPS, up to 100W max
USB-A Ports supports QC 3.0 up to 22.5W max
LCD display shows the current data of each port in real time.
Over-load, Over-voltage, over-current and short circuit protection.

Package contents

200W GaN PD Charger with Charging Display
AC power cable
Stand
Carrying pouch
Quick Start Guide

Layout

SIIG 200W GaN PD Charger with Charging Display - 1

USB-C PD Output 1: 100W max 5V/3A,9V/3A,12V/3A,15V/3A,20V/5A
USB-C PD Output 2: 100W max 5V/3A,9V/3A,12V/3A,15V/3A,20V/5A
USB-C PD Output 3: 100W max 5V/3A,9V/3A,12V/3A,15V/3A,20V/5A
USB-A QC3.0 Output 1: 22.5W max 5V/4.5A, 9V/2A,12V/1.5A
USB-A QC3.0 Output 2: 22.5W max 5V/4.5A, 9V/2A,12V/1.5A
AC input: 100-240V 50/60Hz, 3A max

Multiport Charging Rules

Every ports will have different output limit when multi-port charging at the same time, let every ports can get proper power to charge devices to avoid over loading.
Single port used
USB-C1/C2/C3 Output: 100W
USB-A1/A2 Output: 22.5W
Dual ports used
USB-C1+USB-C2 Output: 100W+100W
USB-C1+USB-C3 Output: 100W+100W
USB-C2+USB-C3 Output: 100W+100W
(USB-C1 /C2/C3)+USB-A1 Output: 100W+22.5W
(USB-C1 /C2/C3)+USB-A2 Output: 100W+22.5W
USB-A1+USB-A2 Output: 12W+12W
Triple ports used
USB-C1+USB-C2+USB-C3 Output: 100W+65W+30W
USB-C1+USB-C2+ USB-A1/A2 Output: 100W+65W+22.5W
USB-C1+USB-C3+ USB-A1/A2 Output: 100W+65W+22.5W
USB-C2+USB-C3+USB-A1 /A2 Output: 100W+65W+22.5W
(USB-C1 /C2/C3)+USB-A1 +USB-A2 Output: 100W+7.5W+7.5W
Quad ports used
USB-C1+USB-C2+USB-C3+USB-A1/A2
Output:100W+65W+20W+15W
USB-C1+USB-C2+ USB-A1 +USB-A2 Output: 100W+65W+7.5W+7.5W
USB-C1+USB-C3+ USB-A1+USB-A2 Output: 100W+65W+7.5W+7.5W
USB-C2+USB-C3+USB-A1+USB-A2 Output: 100W+65W+7.5W+7.5W
Full ports used
USB-C1+USB-C2+USB-C3+USB-A1+USB-A2 Output:100W+65W+20W+7.5W+7.5W
Note:

If without loading, its internal consumption is about <300mW.
Always Unplug the Charger from the power source when not in use
DO NOT place the Charger on heated surface or next to other heat sources
DO NOT attempt to replace any parts or open the case of the Charger, opening the case can cause personal injury due to electrical hazard and will void the manufacturer warranty
DO NOT expose the Charger to liquids or excessive heat
DO NOT use corrosive cleaning substances on the Charger Keep out of the reach of children
For optimal charging speed, we recommend using your device’s original equipment USB charging cable.

TWO YEAR
Manufacturer Warranty
P/N: AC-PW1Y11-S1
Dear Valued Customer
WE REALLY APPRECIATE YOUR PURCHASE
~thank you
Support
For more info or tech support
http://www.siig.com/support
Nov, 2022 Copyright 0 2022 by SIIG, Inc. All rights reserved. 04-1401A

Documents / Resources

| SIIG 200W GaN PD Charger with Charging Display [pdf] User Guide
200W GaN PD Charger with Charging Display, 200W GaN PD, Charger with Charging Display, Charging Display
---|---