SIIG JU-DV0112-S3 USB 3.0 to DVI VGA Pro User Guide
- June 9, 2024
- SIIG
Table of Contents
SIIG JU-DV0112-S3 USB 3.0 to DVI VGA Pro User Guide
Layout
System requirements
- PC with an available USB 3.0 Type-A Port
- Windows® 1 1 / 10 / 8.1/ 8 / 7 (32/64 bit)
- Mac OS X® 10.6 to 13.1 or above (DisplayLink chipset DOES NOT work with Mac OS J 0.13.4 to 10.13.6, It’s recommended to upgrade to Mojave J 0.14 or later version)
Note: If you connect the adapter to a USB 2.0 host port, performance will be limited.
Features
- USB 3.0, 5 Gbps speed, backward compatible with USB 2.0
- Supports DVI & VGA displays up to 1080p@60Hz or 2048×1 152@60Hz
- For VGA displays, use the included DVI-to- VGA adapter to convert DVI to VGA
- USB bus-powered, no power adapter required Green LED light indicates adapter is active and connected
- Support 3.5mm audio out for speaker or earphone.
- Support 3.5mm audio in for microphon
- Allows up to 6 adapters used per system.
- Support display modes: Extend, Mirror and Primary
Package contents
- USB 3.0 to DVI/VGA Pro adapter
- DVI-to-VGA adapter
- Quick Start Guide
DisplayLink driver installation
- Please use the product serial number “jU-DV0J 12-S3” to search the driver from the SIIG
- Download the driver which fits your PC system
- Run the setup file
- Follow the screen instructions to complete the installation and restart your PC
- For DisplayLink configuration, please search & refer to Support document on DisplayLink website https://support.com/
Windows
How to configure DisplayLink displays on Windows
MAC
How to configure DisplayLink displays on Mac OS X
Dear Valued Customer
WE REALLY APPRECIATE YOUR PURCHASE
Support
For more info or tech support
http://www.siig.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>