Kinpthy G10 Handheld Industrial Endoscope Instruction Manual

Kinpthy G10 Handheld Industrial Endoscope

Product Description

G 10 is a high-performance industrial endos cope camera with 5 inch HD color display. It adopts ergonomic design, which makes it easy to operate. Self- storage, support for photo and video functions, also the TF card expansion function (up to 646). This product is equipped with a small diameter HD camera with LED auxiliary lighting. The camera adopts a high-sensitivity chip, which can be used normally even in a dark working environment.

Safety and Maintenance

• The product is an industrial endoscopy camera and is not intended for medical use or human examination.
• Do not hit the camera violently and do not pull the cable.
• When used in an environment with sharp bumps. please use it carefully toprevent the waterproof protective layer of the probe from being scratched.
• The camera probe is not made of heat-resistant and high-tempera turematerials.
• When checking the automobile engine, please ensure that thetemperature in the engine drops to the normal emperature.
• When not in use, please ensure that the lens and the main unit are clean anddry, and avoid contact with oil, etc. or other corrosive and dangerous substances.
• This product is not suitable for people with limited physical, sensory ormental abilities.
• Do not allow children to touch and operate this equipment.

Battery instructions

• Please use a 5V household charger that meets the safety regulations tocharge the equipment.
• Fast charging is not supported. This device supports charging while using.
• If the device is not used for a long time, please ensure that it is charged atleast once every 3 months to prevent irreparable damage caused by excessive discharge of the battery.

Function introduction

1. Setting key: Enter Exit the setting interface
2. Up selection key: OUp Adjust the brightness of the camera LED playback fast forward key Zoom in
3. Enter: Confirm selection Image fixed
4. Switch: press and hold for 3 seconds to turn on/Off
5. Taking photos: Short press to take photos Start recording Long press to switch camera
6. Down selection key: OScroll down Video Picture rotation Video playback back key Long press to switch camera
7. Mode switching: Switch between 3 function modes of take a photo, video and photo album
8. Charging interface
9. Reset
10. TF card slot

Instructions

A insert TF card:

• Please insert the TF card in the off state
• Please pay attention to whether the insertion direction and front and back sides of TF card are correct
• Do not use excessive force when inserting or pulling out the TF card to prevent damage to the card slot structur

Language settings

The default language is English, and the system also supports Simplified Chinese, Japanese, English, Korean, French, German, Italian, Spanish, Russian, Polish

• Press button to enter the setting page
• Select the language setting
• Press the up and down button to select the desired language
• Press OK “to save

Enter the picture-outputting interface

Copy picture and video files

Can use a tf card to copy directly, or use a type-c cable toconnect to computer for copy

When operating the copy, if the machine is not connected to the computer, please restart the machine or plug and unplug the TYPE-C data line. Do not plug and unplug the TYPE-C data cable during the data transmission process, which will cause the data transmission to fail.

Charging Guide

1. Connect the device to the TYPE-C USB adapter for charging (5V=1A/5V=2A). The product does not support fast charging
2. 1. During the charging process, the power symbol indicates that the charging is in progress
3. When the device is fully charged, the power display shows the full state

FAQ

1. The product does not output a picture or the screen turns black Remove the flexible conduit joint, reassemble and tighten it, or restart thedevice.

2. Lags happened during the photo outputting of the product
   Please check whether the product has sufficient power, or restart the device, orreassemble the flexible conduit.

3. Product crash
   Please press the reset button on the back of the device, restart the device.

4. Imaging screen is not clear
   The best imaging focal length of the product is: 2cm-10cm, please calibrate thedistance to the object, or clean the front of the camera with a clean alcohol cloth.

5. Product charging
   Please use (5V=1A/5V=2A) charger to charge the device.The the product does not supportfast charging.

6. The camera is heat
   It is normal for the camera to heat up, especially when the camera LED light is on at the highest brightness. But it does not affect normal use or service life.

7. TF card can not be recognized
   Please confirm whether the TF format is FTA32. If not, please format it and donot recognize it. Please plug and unplug the TF card again

Accessories installation Guide

*Accessories: Protective ring1, Magnet 1, Hook 1
**

Camera ****

Other **

**

Specifications ****

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>