Nightour 60 Lumens Dimmable Desk Lamp User Manual

June 9, 2024
Nightour

Nightour 60 Lumens Dimmable Desk Lamp

Nightour-60-Lumens-Dimmable-Desk-Lamp-PRODUCT

IN THE BOX

Nightour-60-Lumens-Dimmable-Desk-Lamp-FIG-1

SPECIFICATIONS

Nightour (Light Stem)

Lamphead

PRODUCT OVERVIEW

Nightour-60-Lumens-Dimmable-Desk-Lamp-FIG-4

LAMPHEAD INSTALLATION

Please attach the lamphead to the magnetic charging port at the top of the Nightour.

Notice:

  1. Please keep the magnetic charging port and the bottom of the lamphead clean before attaching.
  2. When the lamphead is attached, the top button of the Nightour can control the lamphead.

Note : This is only possible while the Nightour is charging

CHARGING AND UNLOCK

Before first use, please unlock the product by connecting it to a USB power adapter or power source via the included USB-C cable. Before first use, please fully charge the product (best charging efficiency with a 5V 2A or higher- capacity power source, and the charging time will be longer when the USB power source is insufficient to provide 5V 2A power capacity).

Bottom Indicator (Light Stem)

  • Low Battery Alert : When the battery level of the turned-on light stem is lower than 10%, the indicator will flash red; and when the battery level is higher than 10% or the light stem is off, the indicator will go off.
  • Lockout Indication : In the lockout mode, flipping the toggle switch will trigger the indicator to light up red for 2 seconds to indicate that the product is locked out.
  • Unlock Indication : In indicator will flash green 3 times the moment the light stem is unlocked.
  • Charge Indication : While charging, the red indicator means charging, while the green indicator means charging completed.

NOTES

  • When lamphead is locked out at a low battery voltage, you may unlock it by charging via an MCC3 cable or MCA adapter. It may take about 1 minute to unlock.
  • When the lamphead is locked out and attached to the Nightour, you may unlock it by removing the lamphead from the Nightour for no less than 1 second and then attaching it back to the Nightour again.
  • The Nightour cannot be used in the lockout state, please unlock it before use

EXCLUSION CLAUSE

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

DANGER

  • DO NOT put the product near or into fire. This may cause the built-in battery to burn or explode, leading to unexpected hazards.
  • The product has a built-in battery. DO NOT drop it from high places or smash it.
  • Keep out of reach of children.

WARNING

  • DO NOT soak the product in the water to avoid damage.
  • DO NOT short-circuit the magnetic charging port of the Nightour. It may lead to battery drain.

NOTICE

  • Please keep the top magnetic charging port clean, otherwise, it may fail to charge the compatible products (lamphead, Baton 3, Obulb MC/MCs and more to come) or lose the ability to control those products.
  • The top button can be used to control the Baton 3, Obulb MC/MCs and lamphead only while the Nightour is charging.
  • When charging the lamphead with an MCC3 cable or MCA adapter, the indicator integrated on the cable or adapter may not indicate the charge status correctly.
  • When a compatible product is attached to the top magnetic charging port, such product will consume some power whether it is turned on or not. Please connect the Nightour to a power source so that the compatible product can be charged.

HOW TO OPERATE

NIGHTOUR (TOGGLE SWITCH) ON (THE LIGHT IS UNLOCKED):

  • Flip up and hold the toggle switch to turn on the high white light setting; flip down and hold the toggle switch to turn on the low white light setting.
  • Quickly flip down the toggle switch to turn on the memorized white light setting.
  • Quickly flip up the toggle switch twice to turn on the memorized white light setting.

OFF (WHILE THE LIGHT IS ON): Flip down the toggle switch once to turn it off.

RGB COLOR MODES:

  • When the light is on/off, flip up the toggle switch once to enter the RGB color mode 1.
  • When the light is off, quickly flip up the toggle switch 3 times to enter the RGB color mode 1 directly.
  • When the RGB colors are turned on, single flip up the toggle switch to shift between the RGB color mode 1 and RGB color mode 2, and quickly flip up twice to pause/restart the RGB colors
  • INCREASE BRIGHTNESS : Flip up and hold the toggle switch to make the white light and colored lights brighter.
  • DECREASE BRIGHTNESS : Flip down and hold the toggle switch to dim the white and colored lights.
  • MODE CHANGE : When the light is on, quickly flip down the toggle switch twice to shift between white light and RGB.
LOCKOUT/UNLOCK
  • LOCKOUT : When the low white light is on, quickly flip down the toggle switch at least 15 times to enter the lockout mode and the light will turn off.
  • UNLOCK : To unlock, connect the product via the USB cable for charging. While the LED indicator will flash green 3 times to remind.

WHEN ATTACH THE LAMPHEAD TO NIGHTOUR

NOTE : THESE OPERATIONS ARE ONLY POSSIBLE WHILE THE NIGHTOUR IS CHARGING VIA USB-C.

ON/OFF : When attach the lamphead to Nightour’s magnetic port, single click the Nightour’s top button to turn the lamphead on/off.

CHANGE BRIGHTNESS LEVEL: When the lamphead is on, press and hold the Nightour’s top button to carry out stepless dimming. The stepless dimming range is 1%-100% when the battery power is sufficient. When removing the lamphead from the Nightour, the brightness level will be kept at the memorized state at present

LOCKOUT/UNLOCK

LOCKOUT : When the lamphead is off, press and hold the Nightour’s top button for about 2 seconds till the low white light is off to access the lockout mode.

UNLOCK : To unlock, press and hold the Nightour’s top button for one second; or reconnect the lamphead to the Nightour’s magnetic port; or to charge the lamphead with the MCC magnetic charging port. The low white light will be on when unlock.

HOW TO OPERATE THE DETACHED LAMPHEAD

  • When the lamphead is off, quickly shake it twice to turn on at the previous brightness level.
  • When the lamphead is on, quickly shake it twice to turn off.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals