Plextone GZ Electric Co Ltd G5 Pro Active Noise Cancellation Wireless Headphones User Guide

Plextone GZ Electric Co Ltd G5 Pro Active Noise Cancellation Wireless

Headphones

Packing list

• G5 Pro Bluetooth headset*1
• USB-C charging cable*1
• 3.5mm audio cable*1
• 3.5mm microphone*1
• Warranty card * 1
• Instructions* 1

Product specification sheet

• Product model: G5 Pro
• Wireless protocol: A2DP/AVRCP/HFP/HSP
• Type : Head-mounted wireless bluetooth headset
• Weight: 252 grams
• Charging time: 2.5 hours
• Music time : 100 hours
• Impedance : 320
• Frequency response range : 20-20000Hz
• Sensitivity: 108dB
• Wireless Range : 30 feet
• Bluetooth : v5.3
• Speaker diameter: 40mm
• Color : Gold/Black
• Input: 5V – 1A (USB TYPE-C port)
• Output: 5V=– 0.1A
• Capacity : 1000mAH

1. Left side
2. Right side
3. Volume +
4. Volume –
5. Multi-function button/power butter
6. Microphone pickup hole
7. LED indicators
8. USB-C charging port
9. Detachable microphone
10. 3.5mm audio port (no calls)
11. 3.5 mm built-in microphone port

Description for control

Pairing instructions

1. Press and hold the “Multi-function button” for 3 seconds, you will hear the boot tone, and the red and blue lights will flash alternately and quickly when connecting for the first time.
2. Turn on your mobile phone, activate the Bluetooth function, and in the Bluetooth setting interface, click “Search”
3. Select “BT” in “Available Devices” on the phone interface, and hear a long “beep” from the earphone, at the same time, the indicator light turns blue and flashes slowly, indicating that the pairing is complete.

When pairing is unsuccessful

• The pairing mode will last for a few minutes, if the pairing fails, it will turn into a battery protection mode > If the pairing fails, please turn off the headset and try again > When the headset is successfully connected to the mobile phone once, just keep the
• Bluetooth mode” of the mobile phone turned on, the headset Close to the phone and turned on to automatically connect to the phone.

Common problem

• Q: Why can’t I boot?
• A : Before using the headset, please charge it first, and make sure the battery is fully charged (The red light turns off when the battery is fully charged)
• Q : Why can’t I hear the sound?
• A: First confirm that the headset and the phone have been successfully paired, and then increase the volume to your satisfaction.
• Q : Why can’t my mobile phone find my headset device?
• A: Restart and try to reconnect. If your mobile phone has many records of paired Bluetooth devices, please “unpair” them and restart the headset to connect again.

Precautions

• Do not place the headset in a high-temperature environment, including direct sunlight.
• Do not place the headset near fire or other excessive heat.
• Do not place the earphones in wet or submerged in liquid, keep the earphones dry.
• Do not attempt to charge the earbuds in any other way than the provided charging cable.
• Do not disassemble the earphones, any attempt to repair or modify the earphones is prohibited.
• Please pay attention to excessive drops, impact, scratches or other behaviours that affect the function of the earphones. If there is any damage, such as dents, punctures, tearing, deformation or corrosion, please stop using the earphones immediately and contact the store where you purchased them or Contact us through the contact information on the warranty card.
• If the earphone produces an abnormal smell, higher than normal temperature, abnormal color or shape changes, please stop using the earphone immediately, and contact the store where you purchased it or contact us through the contact information on the warranty card.

Kind tips

1. Use a 5V/1A 5V/2A charger to charge the headset. Charging the earphones with a charging device with an excessively high voltage may damage the headset.
2. When the headset has not been used for more than 3 months, it needs to be charged before use.
3. When not in use for a long time, it is recommended to charge the headset every 3 months, which can protect the battery more effectively.
4. It is recommended to use the headset after it is fully charged.

 FCC STATEMENT

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that maycause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

WARRANTY

VOUCHER WARRANTY CARD

Please keep it in good care)

SERVICE
From the day of sale, Any quality problem happens under normal use. The user can apply for the return of the goods within 15 days, and apply for a new, one-year free warranty service in 30 days. The following situation does not belong to the three package service
category:

1. No three packages of vouchers can be provided;
2. Damage caused by improper use of all products;
3. failure caused by the unauthorized dismantling of products; and
4. appearance damage, only maintenance service.

• MODEL:…………..
• NAME:……….
• DATE:……….
• PHONE:………

CONTACT

• Manufacturer: Shenzhen Pushengchang Technology Co., Ltd.
• Address: Tong Xia Yong Industrial Zone, Songgang Town, Baoan District, Shenzhen.
• Service Hotline:
• +86 20-89857247
• E-Mail: [email protected]

QUALIFIED CERTIFICATE

• MODEL/DATE:

Documents / Resources

| Plextone GZ Electric Co Ltd G5 Pro Active Noise Cancellation Wireless Headphones [pdf] User Guide
G5 Pro, G5 Pro Active Noise Cancellation Wireless Headphones, Active Noise Cancellation Wireless Headphones, Noise Cancellation Wireless Headphones, Cancellation Wireless Headphones, Wireless Headphones, Headphones
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>