GIMA M34057EN Full Automatic Stretcher With Varied Positions Instruction Manual

GIMA M34057EN Full Automatic Stretcher With Varied Positions

All serious accidents concerning the medical device supplied by us must be reported to the manufacturer and competent authority of the member state where your registered office is located.

Imported by
Gima S.p.A.
Via Marconi, 1 – 20060 Gessate (MI) Italy
gima@gimaitaly.com – export@gimaitaly.com
www.gimaitaly.com

Technical parameters

1. Size (L WH):
   Maximum Size: 1985 6 89 cm
   Minimum Size: 1985 6 33 cm

2. The height scope of touching down ( 4 grades):
   9 3 cm 8 2 cm 70 cm /3 5 cm

3. Loading Bearing : 159kg

4. Net weight: 40kgs
   Gross Weight: 46 kgs

5. Maximum angle of leaning forward: 11 degrees

6. Maximum angle of leaning back forward: 25degrees

Operating Method

1. Put the sponge mat on the stretcher and fix the straps. Which would make the patient feel safety and comfortable.

2. Fixing or unfix the stretcher from loading stretcher: when fixing the stretcher to the loading stretcher, carry the stretcher onto the loading stretcher, push the stretcher forward, the front wheels would enter the fixation, meanwhile the back wheels would also enter the fixation. T he fixation would make the stretcher locked automatically. When unfixing the stretcher from the loading stretcher, press the red ball button, pull the stretcher out of the fixation, and then the stretcher can be unfixed. Stretcher can become wheelchair.

3. Fixing or unfix the stretcher from the ambulance: 1 when the loading stretcher enter the carriage board, pull the handle, free the handle after the front legs and back legs folded. Push the loading stretcher to the fixation to make it fixed. ( this loading stretcher are blessed with fixation). 2 When unfixing the loading stretcher from the ambulance, unlock the fixation, pull the stretcher, when the legs of the loading stretcher s out of the ambulance, just pull the handle, which would make the back legs become replacement, when the loading stretcher out of the ambulance, the front legs would become replacement automatically.

4. Handrail: automatic inserting fixation, when let it down, pinch the handle and pull it out of the fixation.

5. IV stand: 1 Lift up the pole, and push it forward to make it fixed. Just do the opposite to make it down.
   2 The height of the IV stands can be adjusted, anti-clockwise circumgyrate it, free the nut, the pole of the IV stands can be pulled out. When fixing the IV stands, just adjusting the IV stands to a higher or lower height, and deasil circumgyrate the nut.

6. The adjustment for lathe bed: the loading stretcher are blessed with handles on two sides, pull the handle, the loading stretcher can be adjusted to 4 levels and fold back and forth according to practical needs. Mean-while, the height of the lathe bed can also be adjusted, which can be achieved by adjusting the handles on each side at the same time.

Fitting scope
It can be separate, suitable for emergency system. Can used for Ambulance car, mainly used in some. Areas that entering difficulty, such as and elevator narrow halls and the above stretcher can become wheelchair.

Maintenance

1. Keeps it clean, antirust included.
2. Make sure all the parts tighten together firmly.

Attention in Particular
When transfer patient, make sure close the insurance device, upgrade and lock Fix the belts.

Storage and transportation

1. This product must be kept in the condition of dry, antirust.
2. Can be transported by traditional vehicles.
3. When storing or transporting, stack as the guide on the package, stand upside down is prohibited.

Packing and Accessory

1. This stretcher is packed within carton as a whole.
2. Accessory: eligibility certificate as well as illumination paper.

GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>