alzapower APW-SHR7P4B21 Paper Shredder User Manual

: June 9, 2024
: alzapower

Table of Contents

APW-SHR7P4B21 Paper Shredder
Read User Manual Online (PDF format)
Download This Manual (PDF format)

APW-SHR7P4B21 Paper Shredder

User Manual

Paper Shredder
APW-SHR7P4B21

THANK YOU FOR CHOOSING US!

We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you chose us again the next time you make a purchase.

We are environmentally conscious, therefore we use special eco–friendly packaging. Please recycle!

Recycling and Environmental Protection

We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product. So how are we different?

Packaging you can sat … Well, almost. 🙂

We use ink made from soybeans as opposed to classic petroleum–based ink.
The majority of our packaging is made from 100% recyclable paper.
We limit the use of adhesives. If absolutely necessary, we make sure to choose only water-soluble ones.

We think globally, which means that we actively search for eco–friendly solutions. We keep an eye on trending technology and place findings of the scientific community into practice. We don’t just try to meet quotas and mandates, we aim to exceed them.

TECHNICAL PARAMETERS

OVERVIEW

Shredding motor switch/switch
Paper Input
Power and overheat/overflow indicators
Automatic shredding feeder cover

INSTRUCTIONS

Basic control

Set switch 1 to AUTO.
The shredder automatically switches on when a sheet of paper is inserted into the feed slot. It automatically stops after passing the sheet.
If the shredder stops working because the paper has risen, set the switch to REV (reverse).
Switch between AUTO (forward) and REV (reverse) if the paper does not release by simply setting it to REV. Always stop the appliance for a while to avoid damaging the engine.
To turn the shredder off, switch to OFF.

Automatic feeder for shredding

On the top of the shredder there is an automatic shredding feeder cover that can hold up to 75 A4 sheets of 80g/m2, which the shredder then automatically shreds.

Notice of use

This shredder is designed for short–term operation. If the shredder runs for too long or overheats, it will automatically shut down and you will have to wait a few minutes for it to cool down before resuming operation. This condition will be indicated by the Over heat indicator lighting up. After every 3 minutes of operation, the shredder must be switched off for 60 minutes.

If you load more paper into the shredder than the machine can process, the Over load indicator lights up. In this case, turn the switch to REV and pull out the paper.

The blades of this shredder are not designed for lubrication. Do not use oils or other lubricants.

SAFETY INFORMATION

Read the operating instructions carefully before starting the shredder! Do not stick your fingers or other body parts into the paper feed!

Be careful not to get hair in the paper feed.
Children must be supervised at all times so that they do not play with this appliance.
Protect the appliance from moisture, such as rain and humidity; do not use aerosol products near it!
Ensure that clothing (such as ties), hair, jewelry or other small objects do not come in close proximity to the paper feed.
Do not insert paper clips!
Make sure that the voltage and frequency of the power supply correspond to the data on the type plate! Incorrect voltage can destroy the device!
The socket must remain easily accessible.
Do not open the cover! Electric shock and serious injury could result! The internal parts are not designed for maintenance.
Repairs must only be carried out by a qualified after-sales service technician or the warranty on the equipment will be void. It is forbidden to remove or tamper with the safety features in any way.
Unplug the product from power sources when not in use.
Only use the product for the specified purpose of use.
Incorrect use of the product can lead to a risk of fire, explosion or other hazard and can result in a voided warranty.
This product is not a toy. It may contain small components. Please keep away from children.
Do not use or leave the product in dusty or otherwise contaminated environments.
Do not expose the product to high temperatures or low temperatures. Keep the product in a dry environment.
Do not disassemble the product. Attempting to modify the power bank may damage the product and result in a serious injury.
Do not use the product if it is damaged or emits a suspicious odour.
Use a soft, clean, dry towel for cleaning the surface of the product.
The device should be setup as close as possible to an easily accessible wall socket.
This equipment is not intended for use by children. Avoid touching the media feed opening withthe hands, clothing or hair. Unplug this equipment when not in use for an extended period of time, Hazardous moving part is in this equipment, keep body parts away moving parts.
Sharp edges. Do not touch.